- 05 Sep, 2018 14 commits
-
-
Michael Munday authored
Signalling NaNs were being converted to quiet NaNs during constant propagation through integer <-> float store-to-load forwarding. This occurs because we store float32 constants as float64 values and CPU hardware 'quietens' NaNs during conversion between the two. Eventually we want to move to using float32 values to store float32 constants, however this will be a big change since both the compiler and the assembler expect float64 values. So for now this is a small change that will fix the immediate issue. Fixes #27193. Change-Id: Iac54bd8c13abe26f9396712bc71f9b396f842724 Reviewed-on: https://go-review.googlesource.com/132956 Run-TryBot: Michael Munday <mike.munday@ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Keith Randall <khr@golang.org>
-
Ben Shi authored
Optimize (CMPconst [0] (ADD x y)) to (CMN x y) will only get benefits when the result of the addition is no longer used, otherwise there might be even performance drop. And this CL fixes that issue for CMP/CMN/TST/TEQ. There is little regression in the go1 benchmark (excluding noise), and the test case JSONDecode-4 even gets improvement. name old time/op new time/op delta BinaryTree17-4 21.6s ± 1% 21.6s ± 0% -0.22% (p=0.013 n=30+30) Fannkuch11-4 11.1s ± 0% 11.1s ± 0% +0.11% (p=0.000 n=30+29) FmtFprintfEmpty-4 297ns ± 0% 297ns ± 0% +0.08% (p=0.007 n=26+28) FmtFprintfString-4 589ns ± 1% 589ns ± 0% ~ (p=0.659 n=30+25) FmtFprintfInt-4 644ns ± 1% 650ns ± 0% +0.88% (p=0.000 n=30+24) FmtFprintfIntInt-4 964ns ± 0% 977ns ± 0% +1.33% (p=0.000 n=30+30) FmtFprintfPrefixedInt-4 1.06µs ± 0% 1.07µs ± 0% +1.31% (p=0.000 n=29+27) FmtFprintfFloat-4 1.89µs ± 0% 1.92µs ± 0% +1.25% (p=0.000 n=29+29) FmtManyArgs-4 3.63µs ± 0% 3.67µs ± 0% +1.33% (p=0.000 n=29+27) GobDecode-4 38.1ms ± 1% 37.9ms ± 1% -0.60% (p=0.000 n=29+29) GobEncode-4 35.3ms ± 2% 35.2ms ± 1% ~ (p=0.286 n=30+30) Gzip-4 2.36s ± 0% 2.37s ± 2% ~ (p=0.277 n=24+28) Gunzip-4 264ms ± 1% 264ms ± 1% ~ (p=0.104 n=28+30) HTTPClientServer-4 1.04ms ± 4% 1.02ms ± 4% -1.65% (p=0.000 n=28+28) JSONEncode-4 78.5ms ± 1% 79.6ms ± 1% +1.34% (p=0.000 n=27+28) JSONDecode-4 379ms ± 4% 352ms ± 5% -7.09% (p=0.000 n=29+30) Mandelbrot200-4 17.6ms ± 0% 17.6ms ± 0% ~ (p=0.206 n=28+29) GoParse-4 21.9ms ± 1% 22.1ms ± 1% +0.87% (p=0.000 n=28+26) RegexpMatchEasy0_32-4 631ns ± 0% 641ns ± 0% +1.63% (p=0.000 n=29+30) RegexpMatchEasy0_1K-4 4.11µs ± 0% 4.11µs ± 0% ~ (p=0.700 n=30+30) RegexpMatchEasy1_32-4 670ns ± 0% 679ns ± 0% +1.37% (p=0.000 n=21+30) RegexpMatchEasy1_1K-4 5.31µs ± 0% 5.26µs ± 0% -1.03% (p=0.000 n=25+28) RegexpMatchMedium_32-4 905ns ± 0% 906ns ± 0% +0.14% (p=0.001 n=30+30) RegexpMatchMedium_1K-4 192µs ± 0% 191µs ± 0% -0.45% (p=0.000 n=29+27) RegexpMatchHard_32-4 11.8µs ± 0% 11.7µs ± 0% -0.39% (p=0.000 n=29+28) RegexpMatchHard_1K-4 347µs ± 0% 347µs ± 0% ~ (p=0.084 n=29+30) Revcomp-4 37.5ms ± 1% 37.5ms ± 1% ~ (p=0.279 n=29+29) Template-4 519ms ± 2% 519ms ± 2% ~ (p=0.652 n=28+29) TimeParse-4 2.83µs ± 0% 2.78µs ± 0% -1.90% (p=0.000 n=27+28) TimeFormat-4 5.79µs ± 0% 5.60µs ± 0% -3.23% (p=0.000 n=29+29) [Geo mean] 331µs 330µs -0.16% name old speed new speed delta GobDecode-4 20.1MB/s ± 1% 20.3MB/s ± 1% +0.61% (p=0.000 n=29+29) GobEncode-4 21.7MB/s ± 2% 21.8MB/s ± 1% ~ (p=0.294 n=30+30) Gzip-4 8.23MB/s ± 1% 8.20MB/s ± 2% ~ (p=0.099 n=26+28) Gunzip-4 73.5MB/s ± 1% 73.4MB/s ± 1% ~ (p=0.107 n=28+30) JSONEncode-4 24.7MB/s ± 1% 24.4MB/s ± 1% -1.32% (p=0.000 n=27+28) JSONDecode-4 5.13MB/s ± 4% 5.52MB/s ± 5% +7.65% (p=0.000 n=29+30) GoParse-4 2.65MB/s ± 1% 2.63MB/s ± 1% -0.87% (p=0.000 n=28+26) RegexpMatchEasy0_32-4 50.7MB/s ± 0% 49.9MB/s ± 0% -1.58% (p=0.000 n=29+29) RegexpMatchEasy0_1K-4 249MB/s ± 0% 249MB/s ± 0% ~ (p=0.342 n=30+28) RegexpMatchEasy1_32-4 47.7MB/s ± 0% 47.1MB/s ± 0% -1.39% (p=0.000 n=26+30) RegexpMatchEasy1_1K-4 193MB/s ± 0% 195MB/s ± 0% +1.04% (p=0.000 n=25+28) RegexpMatchMedium_32-4 1.10MB/s ± 0% 1.10MB/s ± 0% -0.42% (p=0.000 n=30+26) RegexpMatchMedium_1K-4 5.33MB/s ± 0% 5.36MB/s ± 0% +0.43% (p=0.000 n=29+29) RegexpMatchHard_32-4 2.72MB/s ± 0% 2.73MB/s ± 0% +0.37% (p=0.000 n=29+30) RegexpMatchHard_1K-4 2.95MB/s ± 0% 2.95MB/s ± 0% ~ (all equal) Revcomp-4 67.8MB/s ± 1% 67.7MB/s ± 1% ~ (p=0.273 n=29+29) Template-4 3.74MB/s ± 2% 3.74MB/s ± 2% ~ (p=0.665 n=28+29) [Geo mean] 15.2MB/s 15.2MB/s +0.21% Change-Id: Ifed1fb8cc02d5ca52c8bc6c21b6b5bf6dbb2701a Reviewed-on: https://go-review.googlesource.com/132115 Run-TryBot: Ben Shi <powerman1st@163.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Cherry Zhang <cherryyz@google.com>
-
fanzha02 authored
Current assembler rewrites float constants to values stored in memory except 0.0, which is not performant. This patch uses the FMOVS/FMOVD instructions to move some available floating-point immediate constants into SIMD&FP destination registers. These available constants can be encoded into FMOVS/FMOVD instructions, checked by the chipfloat7() function. go1 benchmark results. name old time/op new time/op delta BinaryTree17-8 6.27s ± 1% 6.27s ± 1% ~ (p=0.762 n=10+8) Fannkuch11-8 5.42s ± 1% 5.38s ± 0% -0.63% (p=0.000 n=10+10) FmtFprintfEmpty-8 92.9ns ± 1% 93.4ns ± 0% +0.47% (p=0.004 n=9+8) FmtFprintfString-8 169ns ± 2% 170ns ± 4% ~ (p=0.378 n=10+10) FmtFprintfInt-8 197ns ± 1% 196ns ± 1% -0.77% (p=0.009 n=10+9) FmtFprintfIntInt-8 284ns ± 1% 286ns ± 1% ~ (p=0.051 n=10+10) FmtFprintfPrefixedInt-8 419ns ± 0% 422ns ± 1% +0.69% (p=0.038 n=6+10) FmtFprintfFloat-8 458ns ± 0% 463ns ± 1% +1.14% (p=0.000 n=10+10) FmtManyArgs-8 1.35µs ± 2% 1.36µs ± 1% +0.91% (p=0.043 n=10+10) GobDecode-8 16.0ms ± 2% 15.5ms ± 1% -3.39% (p=0.000 n=10+10) GobEncode-8 11.9ms ± 3% 11.4ms ± 1% -3.98% (p=0.000 n=10+9) Gzip-8 621ms ± 0% 625ms ± 0% +0.59% (p=0.000 n=9+10) Gunzip-8 74.0ms ± 1% 74.3ms ± 0% ~ (p=0.059 n=9+8) HTTPClientServer-8 116µs ± 1% 116µs ± 1% ~ (p=0.165 n=10+10) JSONEncode-8 29.3ms ± 1% 29.5ms ± 0% +0.72% (p=0.001 n=10+10) JSONDecode-8 145ms ± 1% 148ms ± 2% +2.06% (p=0.000 n=10+10) Mandelbrot200-8 9.67ms ± 0% 9.48ms ± 1% -1.92% (p=0.000 n=8+10) GoParse-8 7.55ms ± 0% 7.60ms ± 0% +0.57% (p=0.000 n=9+10) RegexpMatchEasy0_32-8 234ns ± 0% 210ns ± 0% -10.13% (p=0.000 n=8+10) RegexpMatchEasy0_1K-8 753ns ± 1% 729ns ± 0% -3.17% (p=0.000 n=10+8) RegexpMatchEasy1_32-8 225ns ± 0% 224ns ± 0% -0.44% (p=0.000 n=9+9) RegexpMatchEasy1_1K-8 1.03µs ± 0% 1.04µs ± 1% +1.29% (p=0.000 n=10+10) RegexpMatchMedium_32-8 320ns ± 3% 296ns ± 6% -7.50% (p=0.000 n=10+10) RegexpMatchMedium_1K-8 77.0µs ± 5% 73.6µs ± 1% ~ (p=0.393 n=10+10) RegexpMatchHard_32-8 3.93µs ± 0% 3.89µs ± 1% -0.95% (p=0.000 n=10+9) RegexpMatchHard_1K-8 120µs ± 5% 115µs ± 1% ~ (p=0.739 n=10+10) Revcomp-8 1.07s ± 0% 1.08s ± 1% +0.63% (p=0.000 n=10+9) Template-8 165ms ± 1% 163ms ± 1% -1.05% (p=0.001 n=8+10) TimeParse-8 751ns ± 1% 749ns ± 1% ~ (p=0.209 n=10+10) TimeFormat-8 759ns ± 1% 751ns ± 1% -0.96% (p=0.001 n=10+10) name old speed new speed delta GobDecode-8 48.0MB/s ± 2% 49.6MB/s ± 1% +3.50% (p=0.000 n=10+10) GobEncode-8 64.5MB/s ± 3% 67.1MB/s ± 1% +4.08% (p=0.000 n=10+9) Gzip-8 31.2MB/s ± 0% 31.1MB/s ± 0% -0.55% (p=0.000 n=9+8) Gunzip-8 262MB/s ± 1% 261MB/s ± 0% ~ (p=0.059 n=9+8) JSONEncode-8 66.3MB/s ± 1% 65.8MB/s ± 0% -0.72% (p=0.001 n=10+10) JSONDecode-8 13.4MB/s ± 1% 13.2MB/s ± 1% -2.02% (p=0.000 n=10+10) GoParse-8 7.67MB/s ± 0% 7.63MB/s ± 0% -0.57% (p=0.000 n=9+10) RegexpMatchEasy0_32-8 136MB/s ± 0% 152MB/s ± 0% +11.45% (p=0.000 n=10+10) RegexpMatchEasy0_1K-8 1.36GB/s ± 1% 1.40GB/s ± 0% +3.25% (p=0.000 n=10+8) RegexpMatchEasy1_32-8 142MB/s ± 0% 143MB/s ± 0% +0.35% (p=0.000 n=10+9) RegexpMatchEasy1_1K-8 992MB/s ± 0% 980MB/s ± 1% -1.27% (p=0.000 n=10+10) RegexpMatchMedium_32-8 3.12MB/s ± 3% 3.38MB/s ± 6% +8.17% (p=0.000 n=10+10) RegexpMatchMedium_1K-8 13.3MB/s ± 5% 13.9MB/s ± 1% ~ (p=0.362 n=10+10) RegexpMatchHard_32-8 8.14MB/s ± 0% 8.21MB/s ± 1% +0.95% (p=0.000 n=10+9) RegexpMatchHard_1K-8 8.54MB/s ± 5% 8.90MB/s ± 1% ~ (p=0.636 n=10+10) Revcomp-8 238MB/s ± 0% 236MB/s ± 1% -0.63% (p=0.000 n=10+9) Template-8 11.8MB/s ± 1% 11.9MB/s ± 1% +1.07% (p=0.001 n=8+10) Change-Id: I57b372d8dcd47e6aec39893843b20385d5d9c37e Reviewed-on: https://go-review.googlesource.com/129555 Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Brad Fitzpatrick authored
The ppc64x builders are failing on the new splice test from CL 113997 but the actual failure is being obscured by a test deadlock. Change-Id: I7747f88bcdba9776a3c0d2f5066cfec572706108 Reviewed-on: https://go-review.googlesource.com/133417 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Tobias Klauser <tobias.klauser@gmail.com>
-
Tobias Klauser authored
The android builders are failing on the AF_UNIX part of the new splice test from CL 113997. Skip them. Change-Id: Ia0519aae922acb11d2845aa687633935bcd4b1b0 Reviewed-on: https://go-review.googlesource.com/133515 Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Brad Fitzpatrick <bradfitz@golang.org>
-
Iskander Sharipov authored
For OINDEX and other Left+Right nodes, we want the whole node to be considered as "may affect memory" if either of Left or Right affect memory. Initial implementation only considered node as such if both Left and Right were non-safe. Change-Id: Icfb965a0b4c24d8f83f3722216db068dad2eba95 Reviewed-on: https://go-review.googlesource.com/133275 Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
David Chase <drchase@google.com>
-
Alessandro Arzilli authored
For some reason on darwin the linker still can't add debug sections to plugins. Executables importing "plugin" do have them, however. Because of issue 25841, plugins on darwin would likely have bad debug info anyway so, for now, this isn't a great loss. This disables the check for debug sections in plugins for darwin only. Updates #27502 Change-Id: Ib8f62dac1e485006b0c2b3ba04f86d733db5ee9a Reviewed-on: https://go-review.googlesource.com/133435Reviewed-by:
-
Iskander Sharipov authored
File is compiled with "-l" flag, so go:noinline is redundant. Change-Id: Ia269f3b9de9466857fc578ba5164613393e82369 Reviewed-on: https://go-review.googlesource.com/133295Reviewed-by:
-
Milan Knezevic authored
Fixes #27258 Change-Id: I1ac75087e2b811e6479990e12d71f2c1f4f47b64 Reviewed-on: https://go-review.googlesource.com/132015Reviewed-by:
-
Tobias Klauser authored
On linux/ppc64{,le} the SYS_SYNC_FILE_RANGE2 syscall is used to implement SyncFileRange. This syscall has a different argument order than SYS_SYNC_FILE_RANGE. Apart from that the implementations of both syscalls are the same, so use a simple wrapper to invoke the syscall with the correct argument order. For context see: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=edd5cd4a9424f22b0fa08bef5e299d41befd5622 Updates #27485 Change-Id: Ib94fb98376bf6c879df6f1b68c3bdd11ebcb5a44 Reviewed-on: https://go-review.googlesource.com/133195 Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: -
Tobias Klauser authored
CL 131735 only updated nilptr3.go for the adjusted nil check. Adjust nilptr3_wasm.go as well. Change-Id: I4a6257d32bb212666fe768dac53901ea0b051138 Reviewed-on: https://go-review.googlesource.com/133495 Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Ben Burkert authored
Rework the splice tests and benchmarks. Move the reading and writing of the spliced connections to child processes so that the I/O is not part of benchmarks or profiles. Enable the use of splice(2) when reading from a unix connection and writing to a TCP connection. The updated benchmarks show a performance gain when using splice(2) to copy large chunks of data that the original benchmark did not capture. name old time/op new time/op delta Splice/tcp-to-tcp/1024-8 5.01µs ± 2% 5.08µs ± 3% ~ (p=0.068 n=8+10) Splice/tcp-to-tcp/2048-8 4.76µs ± 5% 4.65µs ± 3% -2.36% (p=0.015 n=9+8) Splice/tcp-to-tcp/4096-8 4.91µs ± 2% 4.98µs ± 5% ~ (p=0.315 n=9+10) Splice/tcp-to-tcp/8192-8 5.50µs ± 4% 5.44µs ± 3% ~ (p=0.758 n=7+9) Splice/tcp-to-tcp/16384-8 7.65µs ± 7% 6.53µs ± 3% -14.65% (p=0.000 n=10+9) Splice/tcp-to-tcp/32768-8 15.3µs ± 7% 8.5µs ± 5% -44.21% (p=0.000 n=10+10) Splice/tcp-to-tcp/65536-8 30.0µs ± 6% 15.7µs ± 1% -47.58% (p=0.000 n=10+8) Splice/tcp-to-tcp/131072-8 59.2µs ± 2% 27.4µs ± 5% -53.75% (p=0.000 n=9+9) Splice/tcp-to-tcp/262144-8 121µs ± 4% 54µs ±19% -55.56% (p=0.000 n=9+10) Splice/tcp-to-tcp/524288-8 247µs ± 6% 108µs ±12% -56.34% (p=0.000 n=10+10) Splice/tcp-to-tcp/1048576-8 490µs ± 4% 199µs ±12% -59.31% (p=0.000 n=8+10) Splice/unix-to-tcp/1024-8 1.20µs ± 2% 1.35µs ± 7% +12.47% (p=0.000 n=10+10) Splice/unix-to-tcp/2048-8 1.33µs ±12% 1.57µs ± 4% +17.85% (p=0.000 n=9+10) Splice/unix-to-tcp/4096-8 2.24µs ± 4% 1.67µs ± 4% -25.14% (p=0.000 n=9+10) Splice/unix-to-tcp/8192-8 4.59µs ± 8% 2.20µs ±10% -52.01% (p=0.000 n=10+10) Splice/unix-to-tcp/16384-8 8.46µs ±13% 3.48µs ± 6% -58.91% (p=0.000 n=10+10) Splice/unix-to-tcp/32768-8 18.5µs ± 9% 6.1µs ± 9% -66.99% (p=0.000 n=10+10) Splice/unix-to-tcp/65536-8 35.9µs ± 7% 13.5µs ± 6% -62.40% (p=0.000 n=10+9) Splice/unix-to-tcp/131072-8 79.4µs ± 6% 25.7µs ± 4% -67.62% (p=0.000 n=10+9) Splice/unix-to-tcp/262144-8 157µs ± 4% 54µs ± 8% -65.63% (p=0.000 n=10+10) Splice/unix-to-tcp/524288-8 311µs ± 3% 107µs ± 8% -65.74% (p=0.000 n=10+10) Splice/unix-to-tcp/1048576-8 643µs ± 4% 185µs ±32% -71.21% (p=0.000 n=10+10) name old speed new speed delta Splice/tcp-to-tcp/1024-8 204MB/s ± 2% 202MB/s ± 3% ~ (p=0.068 n=8+10) Splice/tcp-to-tcp/2048-8 430MB/s ± 5% 441MB/s ± 3% +2.39% (p=0.014 n=9+8) Splice/tcp-to-tcp/4096-8 833MB/s ± 2% 823MB/s ± 5% ~ (p=0.315 n=9+10) Splice/tcp-to-tcp/8192-8 1.49GB/s ± 4% 1.51GB/s ± 3% ~ (p=0.758 n=7+9) Splice/tcp-to-tcp/16384-8 2.14GB/s ± 7% 2.51GB/s ± 3% +17.03% (p=0.000 n=10+9) Splice/tcp-to-tcp/32768-8 2.15GB/s ± 7% 3.85GB/s ± 5% +79.11% (p=0.000 n=10+10) Splice/tcp-to-tcp/65536-8 2.19GB/s ± 5% 4.17GB/s ± 1% +90.65% (p=0.000 n=10+8) Splice/tcp-to-tcp/131072-8 2.22GB/s ± 2% 4.79GB/s ± 4% +116.26% (p=0.000 n=9+9) Splice/tcp-to-tcp/262144-8 2.17GB/s ± 4% 4.93GB/s ±17% +127.25% (p=0.000 n=9+10) Splice/tcp-to-tcp/524288-8 2.13GB/s ± 6% 4.89GB/s ±13% +130.15% (p=0.000 n=10+10) Splice/tcp-to-tcp/1048576-8 2.09GB/s ±10% 5.29GB/s ±11% +153.36% (p=0.000 n=10+10) Splice/unix-to-tcp/1024-8 850MB/s ± 2% 757MB/s ± 7% -10.94% (p=0.000 n=10+10) Splice/unix-to-tcp/2048-8 1.54GB/s ±11% 1.31GB/s ± 3% -15.32% (p=0.000 n=9+10) Splice/unix-to-tcp/4096-8 1.83GB/s ± 4% 2.45GB/s ± 4% +33.59% (p=0.000 n=9+10) Splice/unix-to-tcp/8192-8 1.79GB/s ± 9% 3.73GB/s ± 9% +108.05% (p=0.000 n=10+10) Splice/unix-to-tcp/16384-8 1.95GB/s ±13% 4.68GB/s ± 3% +139.80% (p=0.000 n=10+9) Splice/unix-to-tcp/32768-8 1.78GB/s ± 9% 5.38GB/s ±10% +202.71% (p=0.000 n=10+10) Splice/unix-to-tcp/65536-8 1.83GB/s ± 8% 4.85GB/s ± 6% +165.70% (p=0.000 n=10+9) Splice/unix-to-tcp/131072-8 1.65GB/s ± 6% 5.10GB/s ± 4% +208.77% (p=0.000 n=10+9) Splice/unix-to-tcp/262144-8 1.67GB/s ± 4% 4.87GB/s ± 7% +191.19% (p=0.000 n=10+10) Splice/unix-to-tcp/524288-8 1.69GB/s ± 3% 4.93GB/s ± 7% +192.38% (p=0.000 n=10+10) Splice/unix-to-tcp/1048576-8 1.63GB/s ± 3% 5.60GB/s ±44% +243.26% (p=0.000 n=10+9) Change-Id: I1eae4c3459c918558c70fc42283db22ff7e0442c Reviewed-on: https://go-review.googlesource.com/113997Reviewed-by:
-
Michael Munday authored
Extends CL 132435 to s390x. s390x has 32- and 64-bit variable rotate left instructions. Change-Id: Ic4f1ebb0e0543207ed2fc8c119e0163b428138a5 Reviewed-on: https://go-review.googlesource.com/133035 Run-TryBot: Michael Munday <mike.munday@ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Ben Shi authored
Add more optimization with TST/CMN. 1. A tiny benchmark shows more than 12% improvement. TSTCMN-4 378µs ± 0% 332µs ± 0% -12.15% (p=0.000 n=30+27) (https://github.com/benshi001/ugo1/blob/master/tstcmn_test.go) 2. There is little regression in the go1 benchmark, excluding noise. name old time/op new time/op delta BinaryTree17-4 19.1s ± 0% 19.1s ± 0% ~ (p=0.994 n=28+29) Fannkuch11-4 10.0s ± 0% 10.0s ± 0% ~ (p=0.198 n=30+25) FmtFprintfEmpty-4 233ns ± 0% 233ns ± 0% +0.14% (p=0.002 n=24+30) FmtFprintfString-4 428ns ± 0% 428ns ± 0% ~ (all equal) FmtFprintfInt-4 472ns ± 0% 472ns ± 0% ~ (all equal) FmtFprintfIntInt-4 725ns ± 0% 725ns ± 0% ~ (all equal) FmtFprintfPrefixedInt-4 889ns ± 0% 888ns ± 0% ~ (p=0.632 n=28+30) FmtFprintfFloat-4 1.20µs ± 0% 1.20µs ± 0% +0.05% (p=0.001 n=18+30) FmtManyArgs-4 3.00µs ± 0% 2.99µs ± 0% -0.07% (p=0.001 n=27+30) GobDecode-4 42.1ms ± 0% 42.2ms ± 0% +0.29% (p=0.000 n=28+28) GobEncode-4 38.6ms ± 9% 38.8ms ± 9% ~ (p=0.912 n=30+30) Gzip-4 2.07s ± 1% 2.05s ± 1% -0.64% (p=0.000 n=29+30) Gunzip-4 175ms ± 0% 175ms ± 0% -0.15% (p=0.001 n=30+30) HTTPClientServer-4 872µs ± 5% 880µs ± 6% ~ (p=0.196 n=30+29) JSONEncode-4 88.5ms ± 1% 89.8ms ± 1% +1.49% (p=0.000 n=23+24) JSONDecode-4 393ms ± 1% 390ms ± 1% -0.89% (p=0.000 n=28+30) Mandelbrot200-4 19.5ms ± 0% 19.5ms ± 0% ~ (p=0.405 n=29+28) GoParse-4 19.9ms ± 0% 20.0ms ± 0% +0.27% (p=0.000 n=30+30) RegexpMatchEasy0_32-4 431ns ± 0% 431ns ± 0% ~ (p=1.000 n=30+30) RegexpMatchEasy0_1K-4 1.61µs ± 0% 1.61µs ± 0% ~ (p=0.527 n=26+26) RegexpMatchEasy1_32-4 443ns ± 0% 443ns ± 0% ~ (all equal) RegexpMatchEasy1_1K-4 2.58µs ± 1% 2.58µs ± 1% ~ (p=0.578 n=27+25) RegexpMatchMedium_32-4 740ns ± 0% 740ns ± 0% ~ (p=0.357 n=30+30) RegexpMatchMedium_1K-4 223µs ± 0% 223µs ± 0% +0.16% (p=0.000 n=30+29) RegexpMatchHard_32-4 12.3µs ± 0% 12.3µs ± 0% ~ (p=0.236 n=27+27) RegexpMatchHard_1K-4 371µs ± 0% 371µs ± 0% +0.09% (p=0.000 n=30+27) Revcomp-4 2.85s ± 0% 2.85s ± 0% ~ (p=0.057 n=28+25) Template-4 408ms ± 1% 409ms ± 1% ~ (p=0.117 n=29+29) TimeParse-4 1.93µs ± 0% 1.93µs ± 0% ~ (p=0.535 n=29+28) TimeFormat-4 1.99µs ± 0% 1.99µs ± 0% ~ (p=0.168 n=29+28) [Geo mean] 306µs 307µs +0.07% name old speed new speed delta GobDecode-4 18.3MB/s ± 0% 18.2MB/s ± 0% -0.31% (p=0.000 n=28+29) GobEncode-4 19.9MB/s ± 8% 19.8MB/s ± 9% ~ (p=0.923 n=30+30) Gzip-4 9.39MB/s ± 1% 9.45MB/s ± 1% +0.65% (p=0.000 n=29+30) Gunzip-4 111MB/s ± 0% 111MB/s ± 0% +0.15% (p=0.001 n=30+30) JSONEncode-4 21.9MB/s ± 1% 21.6MB/s ± 1% -1.45% (p=0.000 n=23+23) JSONDecode-4 4.94MB/s ± 1% 4.98MB/s ± 1% +0.84% (p=0.000 n=27+30) GoParse-4 2.91MB/s ± 0% 2.90MB/s ± 0% -0.34% (p=0.000 n=21+22) RegexpMatchEasy0_32-4 74.1MB/s ± 0% 74.1MB/s ± 0% ~ (p=0.469 n=29+28) RegexpMatchEasy0_1K-4 634MB/s ± 0% 634MB/s ± 0% ~ (p=0.978 n=24+28) RegexpMatchEasy1_32-4 72.2MB/s ± 0% 72.2MB/s ± 0% ~ (p=0.064 n=27+29) RegexpMatchEasy1_1K-4 396MB/s ± 1% 396MB/s ± 1% ~ (p=0.583 n=27+25) RegexpMatchMedium_32-4 1.35MB/s ± 0% 1.35MB/s ± 0% ~ (all equal) RegexpMatchMedium_1K-4 4.60MB/s ± 0% 4.59MB/s ± 0% -0.14% (p=0.000 n=30+26) RegexpMatchHard_32-4 2.61MB/s ± 0% 2.61MB/s ± 0% ~ (all equal) RegexpMatchHard_1K-4 2.76MB/s ± 0% 2.76MB/s ± 0% ~ (all equal) Revcomp-4 89.1MB/s ± 0% 89.1MB/s ± 0% ~ (p=0.059 n=28+25) Template-4 4.75MB/s ± 1% 4.75MB/s ± 1% ~ (p=0.106 n=29+29) [Geo mean] 18.3MB/s 18.3MB/s -0.07% Change-Id: I3cd76ce63e84b0c3cebabf9fa3573b76a7343899 Reviewed-on: https://go-review.googlesource.com/124935 Run-TryBot: Ben Shi <powerman1st@163.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
- 04 Sep, 2018 10 commits
-
-
Ben Shi authored
MADD does MUL-ADD in a single instruction, and MSUB does the similiar simplification for MUL-SUB. The CL implements the optimization with MADD/MSUB. 1. The total size of pkg/android_arm64/ decreases about 20KB, excluding cmd/compile/. 2. The go1 benchmark shows a little improvement for RegexpMatchHard_32-4 and Template-4, excluding noise. name old time/op new time/op delta BinaryTree17-4 16.3s ± 1% 16.5s ± 1% +1.41% (p=0.000 n=26+28) Fannkuch11-4 8.79s ± 1% 8.76s ± 0% -0.36% (p=0.000 n=26+28) FmtFprintfEmpty-4 172ns ± 0% 172ns ± 0% ~ (all equal) FmtFprintfString-4 362ns ± 1% 364ns ± 0% +0.55% (p=0.000 n=30+30) FmtFprintfInt-4 416ns ± 0% 416ns ± 0% ~ (p=0.099 n=22+30) FmtFprintfIntInt-4 655ns ± 1% 660ns ± 1% +0.76% (p=0.000 n=30+30) FmtFprintfPrefixedInt-4 810ns ± 0% 809ns ± 0% -0.08% (p=0.009 n=29+29) FmtFprintfFloat-4 1.08µs ± 0% 1.09µs ± 0% +0.61% (p=0.000 n=30+29) FmtManyArgs-4 2.70µs ± 0% 2.69µs ± 0% -0.23% (p=0.000 n=29+28) GobDecode-4 32.2ms ± 1% 32.1ms ± 1% -0.39% (p=0.000 n=27+26) GobEncode-4 27.4ms ± 2% 27.4ms ± 1% ~ (p=0.864 n=28+28) Gzip-4 1.53s ± 1% 1.52s ± 1% -0.30% (p=0.031 n=29+29) Gunzip-4 146ms ± 0% 146ms ± 0% -0.14% (p=0.001 n=25+30) HTTPClientServer-4 1.00ms ± 4% 0.98ms ± 6% -1.65% (p=0.001 n=29+30) JSONEncode-4 67.3ms ± 1% 67.2ms ± 1% ~ (p=0.520 n=28+28) JSONDecode-4 329ms ± 5% 330ms ± 4% ~ (p=0.142 n=30+30) Mandelbrot200-4 17.3ms ± 0% 17.3ms ± 0% ~ (p=0.055 n=26+29) GoParse-4 16.9ms ± 1% 17.0ms ± 1% +0.82% (p=0.000 n=30+30) RegexpMatchEasy0_32-4 382ns ± 0% 382ns ± 0% ~ (all equal) RegexpMatchEasy0_1K-4 1.33µs ± 0% 1.33µs ± 0% -0.25% (p=0.000 n=30+27) RegexpMatchEasy1_32-4 361ns ± 0% 361ns ± 0% -0.08% (p=0.002 n=30+28) RegexpMatchEasy1_1K-4 2.11µs ± 0% 2.09µs ± 0% -0.54% (p=0.000 n=30+29) RegexpMatchMedium_32-4 594ns ± 0% 592ns ± 0% -0.32% (p=0.000 n=30+30) RegexpMatchMedium_1K-4 173µs ± 0% 172µs ± 0% -0.77% (p=0.000 n=29+27) RegexpMatchHard_32-4 10.4µs ± 0% 10.1µs ± 0% -3.63% (p=0.000 n=28+27) RegexpMatchHard_1K-4 306µs ± 0% 301µs ± 0% -1.64% (p=0.000 n=29+30) Revcomp-4 2.51s ± 1% 2.52s ± 0% +0.18% (p=0.017 n=26+27) Template-4 394ms ± 3% 382ms ± 3% -3.22% (p=0.000 n=28+28) TimeParse-4 1.67µs ± 0% 1.67µs ± 0% +0.05% (p=0.030 n=27+30) TimeFormat-4 1.72µs ± 0% 1.70µs ± 0% -0.79% (p=0.000 n=28+26) [Geo mean] 259µs 259µs -0.33% name old speed new speed delta GobDecode-4 23.8MB/s ± 1% 23.9MB/s ± 1% +0.40% (p=0.001 n=27+26) GobEncode-4 28.0MB/s ± 2% 28.0MB/s ± 1% ~ (p=0.863 n=28+28) Gzip-4 12.7MB/s ± 1% 12.7MB/s ± 1% +0.32% (p=0.026 n=29+29) Gunzip-4 133MB/s ± 0% 133MB/s ± 0% +0.15% (p=0.001 n=24+30) JSONEncode-4 28.8MB/s ± 1% 28.9MB/s ± 1% ~ (p=0.475 n=28+28) JSONDecode-4 5.89MB/s ± 4% 5.87MB/s ± 5% ~ (p=0.174 n=29+30) GoParse-4 3.43MB/s ± 0% 3.40MB/s ± 1% -0.83% (p=0.000 n=28+30) RegexpMatchEasy0_32-4 83.6MB/s ± 0% 83.6MB/s ± 0% ~ (p=0.848 n=28+29) RegexpMatchEasy0_1K-4 768MB/s ± 0% 770MB/s ± 0% +0.25% (p=0.000 n=30+27) RegexpMatchEasy1_32-4 88.5MB/s ± 0% 88.5MB/s ± 0% ~ (p=0.086 n=29+29) RegexpMatchEasy1_1K-4 486MB/s ± 0% 489MB/s ± 0% +0.54% (p=0.000 n=30+29) RegexpMatchMedium_32-4 1.68MB/s ± 0% 1.69MB/s ± 0% +0.60% (p=0.000 n=30+23) RegexpMatchMedium_1K-4 5.90MB/s ± 0% 5.95MB/s ± 0% +0.85% (p=0.000 n=18+20) RegexpMatchHard_32-4 3.07MB/s ± 0% 3.18MB/s ± 0% +3.72% (p=0.000 n=29+26) RegexpMatchHard_1K-4 3.35MB/s ± 0% 3.40MB/s ± 0% +1.69% (p=0.000 n=30+30) Revcomp-4 101MB/s ± 0% 101MB/s ± 0% -0.18% (p=0.018 n=26+27) Template-4 4.92MB/s ± 4% 5.09MB/s ± 3% +3.31% (p=0.000 n=28+28) [Geo mean] 22.4MB/s 22.6MB/s +0.62% Change-Id: I8f304b272785739f57b3c8f736316f658f8c1b2a Reviewed-on: https://go-review.googlesource.com/129119 Run-TryBot: Ben Shi <powerman1st@163.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Ben Shi authored
LDADDALD(64-bit) and LDADDALW(32-bit) are already supported. This CL adds supports of LDADDALH(16-bit) and LDADDALB(8-bit). Change-Id: I4eac61adcec226d618dfce88618a2b98f5f1afe7 Reviewed-on: https://go-review.googlesource.com/132135 Run-TryBot: Ben Shi <powerman1st@163.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Agniva De Sarker authored
Fixes #27243 Change-Id: If9230244938dabd03b9afaa6600310df8f97fe92 Reviewed-on: https://go-review.googlesource.com/131775Reviewed-by:
Bryan C. Mills <bcmills@google.com>
-
Matthew Dempsky authored
Makes the error message more consistent between OAS and OAS2. Fixes #26616. Change-Id: I07ab46c5ef8a37efb2cb557632697f5d1bf789f7 Reviewed-on: https://go-review.googlesource.com/131280 Run-TryBot: Matthew Dempsky <mdempsky@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Robert Griesemer <gri@golang.org>
-
Alessandro Arzilli authored
Splits part of dwarfgeneratedebugsyms into a new function, dwarfGenerateDebugInfo which is called between deadcode elimination and type name mangling. This function takes care of collecting and processing the DIEs for all functions and package-level variables and also generates DIEs for all types used in the program. Fixes #23733 Change-Id: I75ef0608fbed2dffc3be7a477f1b03e7e740ec61 Reviewed-on: https://go-review.googlesource.com/111237 Run-TryBot: Heschi Kreinick <heschi@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Heschi Kreinick <heschi@google.com>
-
Alexey Naidonov authored
Removes unnecessary nil-check when referencing offset from an address. Suggested by Keith Randall in golang/go#27180. Updates golang/go#27180 Change-Id: I326ed7fda7cfa98b7e4354c811900707fee26021 Reviewed-on: https://go-review.googlesource.com/131735Reviewed-by:
-
Josh Bleecher Snyder authored
This prevents accidental regalloc regressions that otherwise can occur from unrelated changes. Change-Id: Iea356fb1a24766361fce13748dc1b46e57b21cea Reviewed-on: https://go-review.googlesource.com/129375 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Josh Bleecher Snyder authored
There's no need to manually manage the backing slice for bs. Removing it simplifies the code, removes some allocations, and speeds it up slightly. Fixes #27403 name old time/op new time/op delta ReadSlice1000Int32s-8 6.39µs ± 1% 6.31µs ± 1% -1.37% (p=0.000 n=27+27) ReadStruct-8 1.25µs ± 2% 1.23µs ± 2% -1.06% (p=0.003 n=30+29) ReadInts-8 301ns ± 0% 297ns ± 1% -1.21% (p=0.000 n=27+30) WriteInts-8 325ns ± 1% 320ns ± 1% -1.59% (p=0.000 n=26+29) WriteSlice1000Int32s-8 6.60µs ± 0% 6.52µs ± 0% -1.23% (p=0.000 n=28+27) PutUint16-8 0.72ns ± 2% 0.71ns ± 2% ~ (p=0.286 n=30+30) PutUint32-8 0.71ns ± 1% 0.71ns ± 0% -0.42% (p=0.003 n=30+25) PutUint64-8 0.78ns ± 2% 0.78ns ± 0% -0.55% (p=0.001 n=30+27) LittleEndianPutUint16-8 0.57ns ± 0% 0.57ns ± 0% ~ (all equal) LittleEndianPutUint32-8 0.57ns ± 0% 0.57ns ± 0% ~ (all equal) LittleEndianPutUint64-8 0.57ns ± 0% 0.57ns ± 0% ~ (all equal) PutUvarint32-8 23.1ns ± 1% 23.1ns ± 1% ~ (p=0.925 n=26+29) PutUvarint64-8 57.5ns ± 2% 57.3ns ± 1% ~ (p=0.338 n=30+26) [Geo mean] 23.0ns 22.9ns -0.61% name old speed new speed delta ReadSlice1000Int32s-8 626MB/s ± 1% 634MB/s ± 1% +1.38% (p=0.000 n=27+27) ReadStruct-8 60.2MB/s ± 2% 60.8MB/s ± 2% +1.08% (p=0.002 n=30+29) ReadInts-8 100MB/s ± 1% 101MB/s ± 1% +1.24% (p=0.000 n=27+30) WriteInts-8 92.2MB/s ± 1% 93.6MB/s ± 1% +1.56% (p=0.000 n=26+29) WriteSlice1000Int32s-8 606MB/s ± 0% 614MB/s ± 0% +1.24% (p=0.000 n=28+27) PutUint16-8 2.80GB/s ± 1% 2.80GB/s ± 1% ~ (p=0.095 n=28+29) PutUint32-8 5.61GB/s ± 1% 5.62GB/s ± 1% ~ (p=0.069 n=27+28) PutUint64-8 10.2GB/s ± 1% 10.2GB/s ± 0% +0.15% (p=0.039 n=27+27) LittleEndianPutUint16-8 3.50GB/s ± 1% 3.50GB/s ± 1% ~ (p=0.552 n=30+29) LittleEndianPutUint32-8 7.01GB/s ± 1% 7.02GB/s ± 1% ~ (p=0.160 n=29+27) LittleEndianPutUint64-8 14.0GB/s ± 1% 14.0GB/s ± 1% ~ (p=0.413 n=29+29) PutUvarint32-8 174MB/s ± 1% 173MB/s ± 1% ~ (p=0.648 n=25+30) PutUvarint64-8 139MB/s ± 2% 140MB/s ± 1% ~ (p=0.271 n=30+26) [Geo mean] 906MB/s 911MB/s +0.55% name old alloc/op new alloc/op delta ReadSlice1000Int32s-8 4.14kB ± 0% 4.13kB ± 0% -0.19% (p=0.000 n=30+30) ReadStruct-8 200B ± 0% 200B ± 0% ~ (all equal) ReadInts-8 64.0B ± 0% 32.0B ± 0% -50.00% (p=0.000 n=30+30) WriteInts-8 112B ± 0% 64B ± 0% -42.86% (p=0.000 n=30+30) WriteSlice1000Int32s-8 4.14kB ± 0% 4.13kB ± 0% -0.19% (p=0.000 n=30+30) PutUint16-8 0.00B 0.00B ~ (all equal) PutUint32-8 0.00B 0.00B ~ (all equal) PutUint64-8 0.00B 0.00B ~ (all equal) LittleEndianPutUint16-8 0.00B 0.00B ~ (all equal) LittleEndianPutUint32-8 0.00B 0.00B ~ (all equal) LittleEndianPutUint64-8 0.00B 0.00B ~ (all equal) PutUvarint32-8 0.00B 0.00B ~ (all equal) PutUvarint64-8 0.00B 0.00B ~ (all equal) [Geo mean] 476B 370B -22.22% name old allocs/op new allocs/op delta ReadSlice1000Int32s-8 3.00 ± 0% 2.00 ± 0% -33.33% (p=0.000 n=30+30) ReadStruct-8 16.0 ± 0% 16.0 ± 0% ~ (all equal) ReadInts-8 8.00 ± 0% 8.00 ± 0% ~ (all equal) WriteInts-8 14.0 ± 0% 14.0 ± 0% ~ (all equal) WriteSlice1000Int32s-8 3.00 ± 0% 2.00 ± 0% -33.33% (p=0.000 n=30+30) PutUint16-8 0.00 0.00 ~ (all equal) PutUint32-8 0.00 0.00 ~ (all equal) PutUint64-8 0.00 0.00 ~ (all equal) LittleEndianPutUint16-8 0.00 0.00 ~ (all equal) LittleEndianPutUint32-8 0.00 0.00 ~ (all equal) LittleEndianPutUint64-8 0.00 0.00 ~ (all equal) PutUvarint32-8 0.00 0.00 ~ (all equal) PutUvarint64-8 0.00 0.00 ~ (all equal) [Geo mean] 6.94 5.90 -14.97% Change-Id: I3790b93e4190d98621d5f2c47e42929a18f56c2e Reviewed-on: https://go-review.googlesource.com/133135 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Agniva De Sarker authored
The same catch block is there in wasm_exec.js for node processes. Added it in browser invocations too, to prevent uncaught exceptions. Change-Id: Icab577ec585fa86df3c76db508b49401bcdb52ae Reviewed-on: https://go-review.googlesource.com/132916Reviewed-by:
Richard Musiol <neelance@gmail.com> Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Leigh McCulloch authored
The indirectType function comment uses the phrase 'layed out'. In the context of that phrase, where something is being placed or sprawled, the word should be 'laid'. 'Layed' is a misspelling of 'laid'. Change-Id: I05ecb97637276e2252c47e92a0bd678130714889 GitHub-Last-Rev: 6ee67371b42c12ceaf4c6c245319748008ac7e7b GitHub-Pull-Request: golang/go#27444 Reviewed-on: https://go-review.googlesource.com/132779Reviewed-by:
Ian Lance Taylor <iant@golang.org>
-
- 03 Sep, 2018 7 commits
-
-
Iskander Sharipov authored
Make OAS2 and OAS2FUNC sink locations point to the assignment position, not the nth LHS position. Fixes #26987 Change-Id: Ibeb9df2da754da8b6638fe1e49e813f37515c13c Reviewed-on: https://go-review.googlesource.com/129315 Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Alexey Palazhchenko authored
Fixes #27202 Change-Id: I83620748a81500e433795c7b2b7f13399d17f777 GitHub-Last-Rev: 64457e12ceaa408efc7f75091f1b30c35b8e5d44 GitHub-Pull-Request: golang/go#27472 Reviewed-on: https://go-review.googlesource.com/133057Reviewed-by:
Daniel Theophanes <kardianos@gmail.com>
-
Ivan Kutuzov authored
Fixes #22238 Change-Id: I8184f789bd4120f3e71c9374c7c2fcbfa95935bf Reviewed-on: https://go-review.googlesource.com/132635Reviewed-by:
-
Michael Munday authored
This CL implements the math/bits.OnesCount{8,16,32,64} functions as intrinsics on s390x using the 'population count' (popcnt) instruction. This instruction was released as the 'population-count' facility which uses the same facility bit (45) as the 'distinct-operands' facility which is a pre-requisite for Go on s390x. We can therefore use it without a feature check. The s390x popcnt instruction treats a 64 bit register as a vector of 8 bytes, summing the number of ones in each byte individually. It then writes the results to the corresponding bytes in the output register. Therefore to implement OnesCount{16,32,64} we need to sum the individual byte counts using some extra instructions. To do this efficiently I've added some additional pseudo operations to the s390x SSA backend. Unlike other architectures the new instruction sequence is faster for OnesCount8, so that is implemented using the intrinsic. name old time/op new time/op delta OnesCount 3.21ns ± 1% 1.35ns ± 0% -58.00% (p=0.000 n=20+20) OnesCount8 0.91ns ± 1% 0.81ns ± 0% -11.43% (p=0.000 n=20+20) OnesCount16 1.51ns ± 3% 1.21ns ± 0% -19.71% (p=0.000 n=20+17) OnesCount32 1.91ns ± 0% 1.12ns ± 1% -41.60% (p=0.000 n=19+20) OnesCount64 3.18ns ± 4% 1.35ns ± 0% -57.52% (p=0.000 n=20+20) Change-Id: Id54f0bd28b6db9a887ad12c0d72fcc168ef9c4e0 Reviewed-on: https://go-review.googlesource.com/114675 Run-TryBot: Michael Munday <mike.munday@ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: -
Iskander Sharipov authored
Teach escape analysis to recognize these assignment patterns as not causing the src to leak: val.x = val.y val.x[i] = val.y[j] val.x1.x2 = val.x1.y2 ... etc Helps to avoid "leaking param" with assignments showed above. The implementation is based on somewhat similiar xs=xs[a:b] special case that is ignored by the escape analysis. We may figure out more generalized version of this, but this one looks like a safe step into that direction. Updates #14858 Change-Id: I6fe5bfedec9c03bdc1d7624883324a523bd11fde Reviewed-on: https://go-review.googlesource.com/126395 Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Charles Kenney authored
Fixes #27406 Change-Id: I9c6f5bac5b26558fa7628233c74a62faf676e811 GitHub-Last-Rev: 29d19f719316b486224a15a50556465811985edf GitHub-Pull-Request: golang/go#27437 Reviewed-on: https://go-review.googlesource.com/132775Reviewed-by:
Emmanuel Odeke <emm.odeke@gmail.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Ankit Goyal authored
Change-Id: I58ba1f5d5c942d6a345c19df1bca80b63fb5abf5 Reviewed-on: https://go-review.googlesource.com/132777Reviewed-by:
-
- 02 Sep, 2018 3 commits
-
-
Phil Pearl authored
The existing implementation has a bunch of special cases and suffers an additional allocation for longer arrays. We can replace this code with a simple implementation using Builder, improve performance and reduce complexity. name old time/op new time/op delta Join/0-8 3.53ns ± 3% 3.72ns ± 2% +5.56% (p=0.000 n=10+10) Join/1-8 3.94ns ± 4% 3.40ns ± 4% -13.57% (p=0.000 n=10+10) Join/2-8 57.0ns ± 3% 51.0ns ± 1% -10.48% (p=0.000 n=10+9) Join/3-8 74.9ns ± 2% 65.5ns ± 4% -12.60% (p=0.000 n=10+10) Join/4-8 105ns ± 0% 79ns ± 4% -24.63% (p=0.000 n=6+10) Join/5-8 116ns ± 2% 91ns ± 4% -21.95% (p=0.000 n=10+10) Join/6-8 131ns ± 1% 104ns ± 1% -20.66% (p=0.000 n=10+10) Join/7-8 141ns ± 0% 114ns ± 4% -18.82% (p=0.000 n=9+10) name old alloc/op new alloc/op delta Join/0-8 0.00B 0.00B ~ (all equal) Join/1-8 0.00B 0.00B ~ (all equal) Join/2-8 16.0B ± 0% 16.0B ± 0% ~ (all equal) Join/3-8 32.0B ± 0% 32.0B ± 0% ~ (all equal) Join/4-8 96.0B ± 0% 48.0B ± 0% -50.00% (p=0.000 n=10+10) Join/5-8 96.0B ± 0% 48.0B ± 0% -50.00% (p=0.000 n=10+10) Join/6-8 128B ± 0% 64B ± 0% -50.00% (p=0.000 n=10+10) Join/7-8 128B ± 0% 64B ± 0% -50.00% (p=0.000 n=10+10) name old allocs/op new allocs/op delta Join/0-8 0.00 0.00 ~ (all equal) Join/1-8 0.00 0.00 ~ (all equal) Join/2-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) Join/3-8 1.00 ± 0% 1.00 ± 0% ~ (all equal) Join/4-8 2.00 ± 0% 1.00 ± 0% -50.00% (p=0.000 n=10+10) Join/5-8 2.00 ± 0% 1.00 ± 0% -50.00% (p=0.000 n=10+10) Join/6-8 2.00 ± 0% 1.00 ± 0% -50.00% (p=0.000 n=10+10) Join/7-8 2.00 ± 0% 1.00 ± 0% -50.00% (p=0.000 n=10+10) Change-Id: I866a50e809c398512cb87648c955eaa4bf4d8606 Reviewed-on: https://go-review.googlesource.com/132895Reviewed-by:
-
Giovanni Bajo authored
This is still not fixed, the testcase reflects that there are still a few boundchecks. Let's fix the good alternative with an explicit test though. Updates #24876 Change-Id: I4da35eb353e19052bd7b69ea6190a69ced8b9b3d Reviewed-on: https://go-review.googlesource.com/107355Reviewed-by:
-
Giovanni Bajo authored
The codegen testsuite uses regexp to parse the syntax, but it doesn't have a way to tell line comments containing checks from line comments containing English sentences. This means that any syntax error (that is, non-matching regexp) is currently ignored and not reported. There were some tests in memcombine.go that had an extraneous space and were thus effectively disabled. It would be great if we could report it as a syntax error, but for now we just punt and swallow the spaces as a workaround, to avoid the same mistake again. Fixes #25452 Change-Id: Ic7747a2278bc00adffd0c199ce40937acbbc9cf0 Reviewed-on: https://go-review.googlesource.com/113835 Run-TryBot: Giovanni Bajo <rasky@develer.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
- 01 Sep, 2018 2 commits
-
-
Leigh McCulloch authored
The words 'the returned' were changed to 'a returned' in 8201b92a when referring to the value returned by SystemCertPool. Brad Fitz pointed out after that commit was merged that it makes the wording of this function doc inconsistent with rest of the stdlib since 'a returned' is not used anywhere, but 'the returned' is frequently used. Fixes #27385 Change-Id: I289b533a5a0b5c63eaf0abb6dec0085388ecf76b GitHub-Last-Rev: 6c83b8025704e291ebe5b15dd2ac3fa65b1b48ff GitHub-Pull-Request: golang/go#27438 Reviewed-on: https://go-review.googlesource.com/132776Reviewed-by:
-
Giovanni Bajo authored
Updates #27199 Change-Id: I5cb6540266901697d3558ce75b8de63b1bfc2ce0 Reviewed-on: https://go-review.googlesource.com/132695Reviewed-by:
Alex Brainman <alex.brainman@gmail.com>
-
- 31 Aug, 2018 4 commits
-
-
Muhammad Falak R Wani authored
Updates golang/go#27376. Change-Id: I9f33233f1aafa10941a63fcb4e49d351ea7ee246 Reviewed-on: https://go-review.googlesource.com/132675Reviewed-by:
Kevin Burke <kev@inburke.com> Run-TryBot: Kevin Burke <kev@inburke.com> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Venil Noronha authored
Change-Id: Ia3dcb3a82e452fdcf0d087e8cd01ac01ca831c84 Reviewed-on: https://go-review.googlesource.com/132597Reviewed-by:
Joe Tsai <thebrokentoaster@gmail.com> Reviewed-by:
-
Than McIntosh authored
In the CPU profile tests for gccgo, check to make sure that the runtime's sigprof handler itself doesn't appear in the profile. Add a "skip if gccgo" guard to one testpoint. Updates #26595 Change-Id: I92a44161d61f17b9305ce09532134edd229745a7 Reviewed-on: https://go-review.googlesource.com/126316 Run-TryBot: Than McIntosh <thanm@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Carlos Eduardo Seo authored
This change adds support for VDSO on ppc64x, making it possible to avoid a syscall in walltime and nanotime. BenchmarkClockVDSOAndFallbackPaths/vDSO-192 20000000 66.0 ns/op BenchmarkClockVDSOAndFallbackPaths/Fallback-192 1000000 1456 ns/op Change-Id: I3373bd804b6f122961de3ae9d034e6ccf35748e6 Reviewed-on: https://go-review.googlesource.com/131135 Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Lynn Boger <laboger@linux.vnet.ibm.com>
-
