Skip to content

G
golang
Commit 1b4025f4 authored by Austin Clements's avatar Austin Clements
Browse files
Options

runtime: replace per-M workbuf cache with per-P gcWork cache 

Currently, each M has a cache of the most recently used *workbuf. This
is used primarily by the write barrier so it doesn't have to access
the global workbuf lists on every write barrier. It's also used by
stack scanning because it's convenient.

This cache is important for write barrier performance, but this
particular approach has several downsides. It's faster than no cache,
but far from optimal (as the benchmarks below show). It's complex:
access to the cache is sprinkled through most of the workbuf list
operations and it requires special care to transform into and back out
of the gcWork cache that's actually used for scanning and marking. It
requires atomic exchanges to take ownership of the cached workbuf and
to return it to the M's cache even though it's almost always used by
only the current M. Since it's per-M, flushing these caches is O(# of
Ms), which may be high. And it has some significant subtleties: for
example, in general the cache shouldn't be used after the
harvestwbufs() in mark termination because it could hide work from
mark termination, but stack scanning can happen after this and *will*
use the cache (but it turns out this is okay because it will always be
followed by a getfull(), which drains the cache).

This change replaces this cache with a per-P gcWork object. This
gcWork cache can be used directly by scanning and marking (as long as
preemption is disabled, which is a general requirement of gcWork).
Since it's per-P, it doesn't require synchronization, which simplifies
things and means the only atomic operations in the write barrier are
occasionally fetching new work buffers and setting a mark bit if the
object isn't already marked. This cache can be flushed in O(# of Ps),
which is generally small. It follows a simple flushing rule: the cache
can be used during any phase, but during mark termination it must be
flushed before allowing preemption. This also makes the dispose during
mutator assist no longer necessary, which eliminates the vast majority
of gcWork dispose calls and reduces contention on the global workbuf
lists. And it's a lot faster on some benchmarks:

benchmark                          old ns/op       new ns/op       delta
BenchmarkBinaryTree17              11963668673     11206112763     -6.33%
BenchmarkFannkuch11                2643217136      2649182499      +0.23%
BenchmarkFmtFprintfEmpty           70.4            70.2            -0.28%
BenchmarkFmtFprintfString          364             307             -15.66%
BenchmarkFmtFprintfInt             317             282             -11.04%
BenchmarkFmtFprintfIntInt          512             483             -5.66%
BenchmarkFmtFprintfPrefixedInt     404             380             -5.94%
BenchmarkFmtFprintfFloat           521             479             -8.06%
BenchmarkFmtManyArgs               2164            1894            -12.48%
BenchmarkGobDecode                 30366146        22429593        -26.14%
BenchmarkGobEncode                 29867472        26663152        -10.73%
BenchmarkGzip                      391236616       396779490       +1.42%
BenchmarkGunzip                    96639491        96297024        -0.35%
BenchmarkHTTPClientServer          100110          70763           -29.31%
BenchmarkJSONEncode                51866051        52511382        +1.24%
BenchmarkJSONDecode                103813138       86094963        -17.07%
BenchmarkMandelbrot200             4121834         4120886         -0.02%
BenchmarkGoParse                   16472789        5879949         -64.31%
BenchmarkRegexpMatchEasy0_32       140             140             +0.00%
BenchmarkRegexpMatchEasy0_1K       394             394             +0.00%
BenchmarkRegexpMatchEasy1_32       120             120             +0.00%
BenchmarkRegexpMatchEasy1_1K       621             614             -1.13%
BenchmarkRegexpMatchMedium_32      209             202             -3.35%
BenchmarkRegexpMatchMedium_1K      54889           55175           +0.52%
BenchmarkRegexpMatchHard_32        2682            2675            -0.26%
BenchmarkRegexpMatchHard_1K        79383           79524           +0.18%
BenchmarkRevcomp                   584116718       584595320       +0.08%
BenchmarkTemplate                  125400565       109620196       -12.58%
BenchmarkTimeParse                 386             387             +0.26%
BenchmarkTimeFormat                580             447             -22.93%

(Best out of 10 runs. The delta of averages is similar.)

This also puts us in a good position to flush these caches when
nearing the end of concurrent marking, which will let us increase the
size of the work buffers while still controlling mark termination
pause time.

Change-Id: I2dd94c8517a19297a98ec280203cccaa58792522
Reviewed-on: https://go-review.googlesource.com/9178
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: 's avatarRuss Cox <rsc@golang.org>
parent d1cae635
Hide whitespace changes
Inline Side-by-side
Showing with 58 additions and 162 deletions
src/runtime/mgc.go
View file @ 1b4025f4
......@@ -501,7 +501,7 @@ func (c *gcControllerState) findRunnable(_p_ *p) *g {
// else for a while, so kick everything out of its run
// queue.
} else {
if _p_.m.ptr().currentwbuf == 0 && work.full == 0 && work.partial == 0 {
if _p_.gcw.wbuf == 0 && work.full == 0 && work.partial == 0 {
// No work to be done right now. This can
// happen at the end of the mark phase when
// there are still assists tapering off. Don't
......@@ -1026,7 +1026,6 @@ func gcBgMarkWorker(p *p) {
// is set, this puts itself into _Gwaiting to be woken up by
// gcController.findRunnable at the appropriate time.
notewakeup(&work.bgMarkReady)
var gcw gcWork
for {
// Go to sleep until woken by gcContoller.findRunnable.
// We can't releasem yet since even the call to gopark
......@@ -1055,18 +1054,19 @@ func gcBgMarkWorker(p *p) {
done := false
switch p.gcMarkWorkerMode {
case gcMarkWorkerDedicatedMode:
gcDrain(&gcw, gcBgCreditSlack)
gcDrain(&p.gcw, gcBgCreditSlack)
// gcDrain did the xadd(&work.nwait +1) to
// match the decrement above. It only returns
// at a mark completion point.
done = true
case gcMarkWorkerFractionalMode, gcMarkWorkerIdleMode:
gcDrainUntilPreempt(&gcw, gcBgCreditSlack)
gcDrainUntilPreempt(&p.gcw, gcBgCreditSlack)
// Was this the last worker and did we run out
// of work?
done = xadd(&work.nwait, +1) == work.nproc && work.full == 0 && work.partial == 0
}
gcw.dispose()
// We're not in mark termination, so there's no need
// to dispose p.gcw.
// If this worker reached a background mark completion
// point, signal the main GC goroutine.
......@@ -1121,6 +1121,14 @@ func gcMark(start_time int64) {
gcCopySpans() // TODO(rlh): should this be hoisted and done only once? Right now it is done for normal marking and also for checkmarking.
// Gather all cached GC work. All other Ps are stopped, so
// it's safe to manipulate their GC work caches. During mark
// termination, these caches can still be used temporarily,
// but must be disposed to the global lists immediately.
for i := 0; i < int(gomaxprocs); i++ {
allp[i].gcw.dispose()
}
work.nwait = 0
work.ndone = 0
work.nproc = uint32(gcprocs())
......@@ -1135,9 +1143,9 @@ func gcMark(start_time int64) {
helpgc(int32(work.nproc))
}
harvestwbufs() // move local workbufs onto global queues where the GC can find them
gchelperstart()
parfordo(work.markfor)
var gcw gcWork
gcDrain(&gcw, -1)
gcw.dispose()
......@@ -1153,6 +1161,12 @@ func gcMark(start_time int64) {
notesleep(&work.alldone)
}
for i := 0; i < int(gomaxprocs); i++ {
if allp[i].gcw.wbuf != 0 {
throw("P has cached GC work at end of mark termination")
}
}
if trace.enabled {
traceGCScanDone()
}
......
src/runtime/mgcmark.go
View file @ 1b4025f4
......@@ -55,6 +55,7 @@ var oneptr = [...]uint8{typePointer}
//go:nowritebarrier
func markroot(desc *parfor, i uint32) {
// TODO: Consider using getg().m.p.ptr().gcw.
var gcw gcWork
// Note: if you add a case here, please also update heapdump.go:dumproots.
......@@ -172,6 +173,8 @@ func markroot(desc *parfor, i uint32) {
// allocations performed by this mutator since the last assist.
//
// It should only be called during gcphase == _GCmark.
//
// This must be called with preemption disabled.
//go:nowritebarrier
func gcAssistAlloc(size uintptr, allowAssist bool) {
// Find the G responsible for this assist.
......@@ -228,19 +231,14 @@ func gcAssistAlloc(size uintptr, allowAssist bool) {
xadd(&work.nwait, -1)
// drain own current wbuf first in the hopes that it
// drain own cached work first in the hopes that it
// will be more cache friendly.
var gcw gcWork
gcw.initFromCache()
gcw := &getg().m.p.ptr().gcw
startScanWork := gcw.scanWork
gcDrainN(&gcw, scanWork)
gcDrainN(gcw, scanWork)
// Record that we did this much scan work.
gp.gcscanwork += gcw.scanWork - startScanWork
// TODO(austin): This is the vast majority of our
// disposes. Instead of constantly disposing, keep a
// per-P gcWork cache (probably combined with the
// write barrier wbuf cache).
gcw.dispose()
// No need to dispose since we're not in mark termination.
// If this is the last worker and we ran out of work,
// signal a completion point.
......@@ -315,21 +313,24 @@ func scanstack(gp *g) {
throw("can't scan gchelper stack")
}
var gcw gcWork
gcw.initFromCache()
gcw := &getg().m.p.ptr().gcw
origBytesMarked := gcw.bytesMarked
origScanWork := gcw.scanWork
scanframe := func(frame *stkframe, unused unsafe.Pointer) bool {
// Pick up gcw as free variable so gentraceback and friends can
// keep the same signature.
scanframeworker(frame, unused, &gcw)
scanframeworker(frame, unused, gcw)
return true
}
gentraceback(^uintptr(0), ^uintptr(0), 0, gp, 0, nil, 0x7fffffff, scanframe, nil, 0)
tracebackdefers(gp, scanframe, nil)
// Stacks aren't part of the heap, so don't count them toward
// marked heap bytes.
gcw.bytesMarked = 0
gcw.scanWork = 0
gcw.disposeToCache()
gcw.bytesMarked = origBytesMarked
gcw.scanWork = origScanWork
if gcphase == _GCmarktermination {
gcw.dispose()
}
gp.gcscanvalid = true
}
......@@ -462,7 +463,6 @@ func gcDrain(gcw *gcWork, flushScanCredit int64) {
credit := gcw.scanWork - lastScanFlush
xaddint64(&gcController.bgScanCredit, credit)
}
checknocurrentwbuf()
}
// gcDrainUntilPreempt blackens grey objects until g.preempt is set.
......@@ -524,7 +524,6 @@ func gcDrainUntilPreempt(gcw *gcWork, flushScanCredit int64) {
// scanning is always done in whole object increments.
//go:nowritebarrier
func gcDrainN(gcw *gcWork, scanWork int64) {
checknocurrentwbuf()
targetScanWork := gcw.scanWork + scanWork
for gcw.scanWork < targetScanWork {
// This might be a good place to add prefetch code...
......@@ -646,33 +645,16 @@ func scanobject(b, n uintptr, ptrmask *uint8, gcw *gcWork) {
// Shade the object if it isn't already.
// The object is not nil and known to be in the heap.
// Preemption must be disabled.
//go:nowritebarrier
func shade(b uintptr) {
if obj, hbits, span := heapBitsForObject(b); obj != 0 {
// TODO: this would be a great place to put a check to see
// if we are harvesting and if we are then we should
// figure out why there is a call to shade when the
// harvester thinks we are in a STW.
// if atomicload(&harvestingwbufs) == uint32(1) {
// // Throw here to discover write barriers
// // being executed during a STW.
// throw("shade during harvest")
// }
var gcw gcWork
greyobject(obj, 0, 0, hbits, span, &gcw)
// This is part of the write barrier so put the wbuf back.
gcw := &getg().m.p.ptr().gcw
greyobject(obj, 0, 0, hbits, span, gcw)
if gcphase == _GCmarktermination {
// Ps aren't allowed to cache work during mark
// termination.
gcw.dispose()
} else {
// If we added any pointers to the gcw, then
// currentwbuf must be nil because 1)
// greyobject got its wbuf from currentwbuf
// and 2) shade runs on the systemstack, so
// we're still on the same M. If either of
// these becomes no longer true, we need to
// rethink this.
gcw.disposeToCache()
}
}
}
......
src/runtime/mgcwork.go
View file @ 1b4025f4
......@@ -38,7 +38,7 @@ func (wp wbufptr) ptr() *workbuf {
// A gcWork provides the interface to produce and consume work for the
// garbage collector.
//
// The usual pattern for using gcWork is:
// A gcWork can be used on the stack as follows:
//
// var gcw gcWork
// disable preemption
......@@ -46,6 +46,15 @@ func (wp wbufptr) ptr() *workbuf {
// gcw.dispose()
// enable preemption
//
// Or from the per-P gcWork cache:
//
// (preemption must be disabled)
// gcw := &getg().m.p.ptr().gcw
// .. call gcw.put() to produce and gcw.get() to consume ..
// if gcphase == _GCmarktermination {
// gcw.dispose()
// }
//
// It's important that any use of gcWork during the mark phase prevent
// the garbage collector from transitioning to mark termination since
// gcWork may locally hold GC work buffers. This can be done by
......@@ -63,17 +72,6 @@ type gcWork struct {
scanWork int64
}
// initFromCache fetches work from this M's currentwbuf cache.
//go:nowritebarrier
func (w *gcWork) initFromCache() {
// TODO: Instead of making gcWork pull from the currentwbuf
// cache, use a gcWork as the cache and make shade pass around
// that gcWork.
if w.wbuf == 0 {
w.wbuf = wbufptr(xchguintptr(&getg().m.currentwbuf, 0))
}
}
// put enqueues a pointer for the garbage collector to trace.
//go:nowritebarrier
func (ww *gcWork) put(obj uintptr) {
......@@ -174,27 +172,6 @@ func (w *gcWork) dispose() {
}
}
// disposeToCache returns any cached pointers to this M's currentwbuf.
// It calls throw if currentwbuf is non-nil.
//go:nowritebarrier
func (w *gcWork) disposeToCache() {
if wbuf := w.wbuf; wbuf != 0 {
wbuf = wbufptr(xchguintptr(&getg().m.currentwbuf, uintptr(wbuf)))
if wbuf != 0 {
throw("m.currentwbuf non-nil in disposeToCache")
}
w.wbuf = 0
}
if w.bytesMarked != 0 {
xadd64(&work.bytesMarked, int64(w.bytesMarked))
w.bytesMarked = 0
}
if w.scanWork != 0 {
xaddint64(&gcController.scanWork, w.scanWork)
w.scanWork = 0
}
}
// balance moves some work that's cached in this gcWork back on the
// global queue.
//go:nowritebarrier
......@@ -222,7 +199,7 @@ type workbuf struct {
}
// workbuf factory routines. These funcs are used to manage the
// workbufs. They cache workbuf in the m struct field currentwbuf.
// workbufs.
// If the GC asks for some work these are the only routines that
// make partially full wbufs available to the GC.
// Each of the gets and puts also take an distinct integer that is used
......@@ -283,13 +260,6 @@ func (b *workbuf) checkempty() {
}
}
// checknocurrentwbuf checks that the m's currentwbuf field is empty
func checknocurrentwbuf() {
if getg().m.currentwbuf != 0 {
throw("unexpected currentwbuf")
}
}
// getempty pops an empty work buffer off the work.empty list,
// allocating new buffers if none are available.
// entry is used to record a brief history of ownership.
......@@ -335,21 +305,7 @@ func putfull(b *workbuf, entry int) {
// indicating that two line numbers in the call chain.
//go:nowritebarrier
func getpartialorempty(entry int) *workbuf {
var b *workbuf
// If this m has a buf in currentwbuf then as an optimization
// simply return that buffer. If it turns out currentwbuf
// is full, put it on the work.full queue and get another
// workbuf off the partial or empty queue.
if getg().m.currentwbuf != 0 {
b = (*workbuf)(unsafe.Pointer(xchguintptr(&getg().m.currentwbuf, 0)))
if b != nil {
if b.nobj <= len(b.obj) {
return b
}
putfull(b, entry+80100000)
}
}
b = (*workbuf)(lfstackpop(&work.partial))
b := (*workbuf)(lfstackpop(&work.partial))
if b != nil {
b.logget(entry)
return b
......@@ -395,21 +351,6 @@ func trygetfull(entry int) *workbuf {
b.checknonempty()
return b
}
// full and partial are both empty so see if there
// is an work available on currentwbuf.
// This is an optimization to shift
// processing from the STW marktermination phase into
// the concurrent mark phase.
if getg().m.currentwbuf != 0 {
b = (*workbuf)(unsafe.Pointer(xchguintptr(&getg().m.currentwbuf, 0)))
if b != nil {
if b.nobj != 0 {
return b
}
putempty(b, 839)
b = nil
}
}
return b
}
......@@ -438,19 +379,6 @@ func getfull(entry int) *workbuf {
b.logget(entry)
return b
}
// Make sure that currentwbuf is also not a source for pointers to be
// processed. This is an optimization that shifts processing
// from the mark termination STW phase to the concurrent mark phase.
if getg().m.currentwbuf != 0 {
b = (*workbuf)(unsafe.Pointer(xchguintptr(&getg().m.currentwbuf, 0)))
if b != nil {
if b.nobj != 0 {
return b
}
putempty(b, 877)
b = nil
}
}
xadd(&work.nwait, +1)
for i := 0; ; i++ {
......@@ -500,35 +428,3 @@ func handoff(b *workbuf) *workbuf {
putfull(b, 942)
return b1
}
// 1 when you are harvesting so that the write buffer code shade can
// detect calls during a presumable STW write barrier.
var harvestingwbufs uint32
// harvestwbufs moves non-empty workbufs to work.full from m.currentwuf
// Must be in a STW phase.
// xchguintptr is used since there are write barrier calls from the GC helper
// routines even during a STW phase.
// TODO: chase down write barrier calls in STW phase and understand and eliminate
// them.
//go:nowritebarrier
func harvestwbufs() {
// announce to write buffer that you are harvesting the currentwbufs
atomicstore(&harvestingwbufs, 1)
for mp := allm; mp != nil; mp = mp.alllink {
wbuf := (*workbuf)(unsafe.Pointer(xchguintptr(&mp.currentwbuf, 0)))
// TODO: beat write barriers out of the mark termination and eliminate xchg
// tempwbuf := (*workbuf)(unsafe.Pointer(tempm.currentwbuf))
// tempm.currentwbuf = 0
if wbuf != nil {
if wbuf.nobj == 0 {
putempty(wbuf, 945)
} else {
putfull(wbuf, 947) //use full instead of partial so GC doesn't compete to get wbuf
}
}
}
atomicstore(&harvestingwbufs, 0)
}
src/runtime/runtime2.go
View file @ 1b4025f4
......@@ -304,7 +304,6 @@ type m struct {
waitsemacount uint32
waitsemalock uint32
gcstats gcstats
currentwbuf uintptr // use locks or atomic operations such as xchguinptr to access.
needextram bool
traceback uint8
waitunlockf unsafe.Pointer // todo go func(*g, unsafe.pointer) bool
......@@ -384,6 +383,11 @@ type p struct {
gcBgMarkWorker *g
gcMarkWorkerMode gcMarkWorkerMode
// gcw is this P's GC work buffer cache. The work buffer is
// filled by write barriers, drained by mutator assists, and
// disposed on certain GC state transitions.
gcw gcWork
pad [64]byte
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment