Every time I poke at #14921, the g.waitreason string
pointer writes show up.

They're not particularly important performance-wise,
but it'd be nice to clear the noise away.

And it does open up a few extra bytes in the g struct
for some future use.

This is a re-roll of CL 99078, which was rolled
back because of failures on s390x.
Those failures were apparently due to an old version of gdb.

Change-Id: Icc2c12f449b2934063fd61e272e06237625ed589
Reviewed-on: https://go-review.googlesource.com/111256
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>

Sometimes, a newly installed the test app is not ready to launch
or the reported app path is stale. Pause and retry the launch if
the lldb script did not run the program.

Change-Id: Ic7745d4b5a02f2e3cb8134341859039812f65a65
Reviewed-on: https://go-review.googlesource.com/111216
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Also replace repeated `or` clauses with the Python idiomatic list
operator `in`.

Change-Id: I4b178f93eb92996d8b5449ee5d252543624aed9e
Reviewed-on: https://go-review.googlesource.com/111215
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

log.Fatal exits the process and doesn't allow deferred functions
to run. Extract log.Fatal calls to main where all deferred functions
have completed.

For the iOS builder.

Change-Id: Id1ef9955bed19944a819d6137a611d6ecbe624a6
Reviewed-on: https://go-review.googlesource.com/110955
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Sometimes ideviceinstaller fails to install the app. Retry a few
times before giving up.

For the iOS builder.

Change-Id: Ib066ffd4f97ae8d22c0fa9a78ea4d04f67c17410
Reviewed-on: https://go-review.googlesource.com/111055
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Java fails to unzip archives created by archive/zip because directories are
written with the "data descriptor" flag (bit 3) set, but emits no such
descriptor. To fix this, we explicitly clear the flag.

Fixes #25215

Change-Id: Id3af4c7f863758197063df879717c1710f86c0e5
Reviewed-on: https://go-review.googlesource.com/110795Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

If TMPDIR is not set, the iOS runtime will automatically set TMPDIR
to a valid app temporary path.

For the iOS builders.

Change-Id: Ia82404059dcb10678f0a6e0c96d5efc79a5485fd
Reviewed-on: https://go-review.googlesource.com/110956
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #22747.

Change-Id: I498cb29f18bd9b59b13dc2ddc3a613cc12ac2a14
Reviewed-on: https://go-review.googlesource.com/110975Reviewed-by: Matthew Dempsky <mdempsky@google.com>

Changes include:
1. open compilation option -msan for arm64
2. modify doc to explain -msan is also supported on linux/arm64
3. wrap msan lib API in msan_arm64.s
4. use libc for sigaction syscalls when cgo is enabled
5. use libc for mmap syscalls when cgo is enabled

Change-Id: I26ebe61ff7ce1906125f54a0182a720f9d58ec11
Reviewed-on: https://go-review.googlesource.com/109255
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

We need to grab the mutex before we can access it.

Fixes #24438

Change-Id: Idd6130036691acec5bc5f8b40d6884f8db1d9d3c
Reviewed-on: https://go-review.googlesource.com/101283
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Imported (incl. dot-imported) objects are always in file scope,
never in package scope. Fix misleading comment.

Package-scope declared objects must have objMap entry by
construction (of that map). Remove unnecessary check and
corresponding misleading comment.

Found while investigating solutions for @23203.

Change-Id: Idadfdd1576681ae56e11daa27bdcee2c73733c41
Reviewed-on: https://go-review.googlesource.com/110916
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>

Uncomment the test cases in arm64enc.s because they can be handled
by current assembler. In addition, CL supplements more test cases.

Change-Id: I583d45793b8227c6ec370868652dd8bcbfaa1ecf
Reviewed-on: https://go-review.googlesource.com/109275Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Add a compiler intrinsic for getcallerpc on following architectures:
  arm
  mips mipsle mips64 mips64le
  ppc64 ppc64le
  s390x

Change-Id: I758f3d4742fc214b206bcd07d90408622c17dbef
Reviewed-on: https://go-review.googlesource.com/110835
Run-TryBot: Wei Xiao <Wei.Xiao@arm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

The assembler does not produce pcstmt symbols, writeline should be able
to work even if no pcstmt symbol exists for a given function.

Fixes #25216, #25191

Change-Id: I41e16df1e7c8ca59d27e7514537609e309a51c51
Reviewed-on: https://go-review.googlesource.com/110816Reviewed-by: David Chase <drchase@google.com>

It's apparent from the file names or build tags to which OS the code in
question applies.

Change-Id: I628ee2bf1d29a6bc30ca5fa6f9eecf809e78a182
Reviewed-on: https://go-review.googlesource.com/110815
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

We have a cmd/go test ensuring that upx (an executable
packer/compressor) works on linux/amd64 Go binaries.

The linux-386-sid builder is built from the same dockerfile as the
linux-amd64-sid builder, so upx should also already be available on
the former. Since upx support 386 executables, we can enable the upx
test for GOARCH=386.

Updates #16706

Change-Id: I94e19ff1001de83a0386754a5104a377c72fb221
Reviewed-on: https://go-review.googlesource.com/110817
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Rename memclrrange to signify that it does not handle
all types of range clears.

Simplify checks to detect the range clear idiom for
arrays and slices.

Add tests to verify the optimization for the slice
range clear idiom is being applied by the compiler.

Change-Id: I5c3b7c9a479699ebdb4c407fde692f30f377860c
Reviewed-on: https://go-review.googlesource.com/110477
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

flagiexport currently controls not just whether to use the indexed
export format when writing out package data, but also how symbol
import logic works. In particular, it enables lazy loading logic that
currently doesn't work with packages imported via bimport.

We could change the import logic to base decisions on the export data
format used by the packages that individual symbols were loaded from,
but since we expect to deprecate and remove bimport anyway and there's
no need for mixing bimport and iimport, it's simpler to just disallow
mixing them.

Change-Id: I02dbac45062e9dd85a1a647ee46bfa0efbb67e9d
Reviewed-on: https://go-review.googlesource.com/110715Reviewed-by: Robert Griesemer <gri@golang.org>

In ast/ast.go, added an Incomplete field inside CompositeLit
to denote that fields are missing.

In ast/filter.go, added a new function to go through the expression list
checking for KeyValue expressions inside composite literals.
Filter out entries with an unexported key.

In printer/nodes.go, checking if the Incomplete field is set,
and accordingly print the filtered message with proper indentation.

Copying over similar functionality in doc/exports.go so as to
maintain parity with ast/filter.go and such that godoc
can show the output correctly.

Fixes #22803

Change-Id: I57a3b999521933e32411a18e02d0b94d2ea2e6f6
Reviewed-on: https://go-review.googlesource.com/106395
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>

Proves IsSliceInBounds one additional time building std+cmd,
at encoding/hex/hex.go:187:8.

The code is:

	if numAvail := len(d.in) / 2; len(p) > numAvail {
		p = p[:numAvail]
	}

Previously we were unable to prove that numAvail >= 0.

Change-Id: Ie74e0aef809f9194c45e129ee3dae60bc3eae02f
Reviewed-on: https://go-review.googlesource.com/109415
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>

Also do very minor code cleanup.

name                old time/op  new time/op  delta
StackCopyPtr-8      84.8ms ± 6%  82.9ms ± 5%  -2.19%  (p=0.000 n=95+94)
StackCopy-8         68.4ms ± 5%  65.3ms ± 4%  -4.54%  (p=0.000 n=99+99)
StackCopyNoCache-8   107ms ± 2%   105ms ± 2%  -2.13%  (p=0.000 n=91+95)

Change-Id: I2d85ede48bffada9584d437a08a82212c0da6d00
Reviewed-on: https://go-review.googlesource.com/109001
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>

The existing implementation only considers the special ASCII
case when the lower character is an upper case letter. This
means that most ASCII comparisons use unicode.SimpleFold even
when it is not necessary.

benchmark                old ns/op     new ns/op     delta
BenchmarkEqualFold-8     450           390           -13.33%

Change-Id: I735ca3c30fc0145c186d2a54f31fd39caab2c3fa
Reviewed-on: https://go-review.googlesource.com/110018Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The explanation about VARDEF/VARKILL is from when liveness analysis
was performed on Progs. Now that it's performed on SSA, it should
reference their corresponding SSA ops (OpVarDef/OpVarKill) instead.

Change-Id: Icc4385b52768f6987cda162824b75340aee0b223
Reviewed-on: https://go-review.googlesource.com/76313Reviewed-by: Robert Griesemer <gri@golang.org>

Triggers 21 times during make.bash.

Change-Id: I7efb34200439256151304bb66cd309913f7c9c9e
Reviewed-on: https://go-review.googlesource.com/110557
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The Uname name was never being used because it always generated a
too-long string.

The new test looking for zero bytes wouldn't have caught it (I thought
it would've), but is still nice to have.

Updates #24701

Change-Id: I2648074452609e4ad1b9736973e1b3a95eac658d
Reviewed-on: https://go-review.googlesource.com/110436Reviewed-by: Ian Lance Taylor <iant@golang.org>

Go runtime currently only populates hwcap for ppc64 and arm64.
While the interpretation of hwcap is platform specific the hwcap
information is generally available on linux.

Changing the runtime variable name to cpu_hwcap for cpu.hwcap makes it
consistent with the general naming of runtime variables that are linked
to other packages.

Change-Id: I1e1f932a73ed624a219b9298faafbb6355e47ada
Reviewed-on: https://go-review.googlesource.com/94757Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

R11 is only used as a temporary by a very small set of instructions
(DIV, MOD, MULH and extended MVC/XC instructions). By marking these
instructions as clobbering R11 we can allocate R11 in the general
case.

Change-Id: I0d4ffe80e57c164d42a5ea5ef6308756a5b0f742
Reviewed-on: https://go-review.googlesource.com/110255
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The strconv shifts table is 320 bytes (amd64) and is present in
many binaries since integer formatting is very common.

Instead of using a precalculated table with shift amounts
use a bounded bits.TrailingZeros to determine the shift amount
to format numbers in a base that is a power of 2.

amd64:
name        old time/op  new time/op  delta
AppendUint   379ns ± 1%   286ns ± 2%  -24.62%  (p=0.000 n=20+19)

Change-Id: Ib94d9b033321b41e975868943c7fcd9428c5111e
Reviewed-on: https://go-review.googlesource.com/110478Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The current code is not optimized for cases where the length of the
substring to be searched is between 9 bytes and 32 bytes. This CL
optimizes the situations.

Benchmark:
name                             old time/op  new time/op  delta
pkg:strings goos:linux goarch:arm64
IndexHard1-8                     1.06ms ± 0%  1.06ms ± 0%   -0.44%  (p=0.000 n=7+8)
IndexHard2-8                     1.25ms ± 1%  1.26ms ± 2%     ~     (p=0.328 n=8+8)
IndexHard3-8                     2.85ms ± 1%  1.18ms ± 1%  -58.59%  (p=0.000 n=8+8)
IndexHard4-8                     2.90ms ± 1%  2.87ms ± 1%   -0.96%  (p=0.021 n=8+8)

pkg:bytes goos:linux goarch:arm64
IndexByte/4M-8                      726124.200000ns +- 6%     560021.400000ns +-20%  -22.88%  (p=0.008 n=5+5)
IndexRune/4M-8                      928768.600000ns +- 0%     793144.600000ns +- 6%  -14.60%  (p=0.008 n=5+5)

Change-Id: Ieebeb784ae69b2a0642ea96e9486a1d120923568
Reviewed-on: https://go-review.googlesource.com/109895Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This makes math/bits not have any explicit imports even
when compiling tests and thereby avoids import cycles when
dependencies of testing want to import math/bits.

Change-Id: I95eccae2f5c4310e9b18124abfa85212dfbd9daa
Reviewed-on: https://go-review.googlesource.com/110479
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Updates #6163
Fixes #24808

Change-Id: I4f5c686ebf60f72f71f566199ee3e946076202bb
Reviewed-on: https://go-review.googlesource.com/110439
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Change-Id: I573172384eaf32daaca5021a9a1874bf0f3d340f
Reviewed-on: https://go-review.googlesource.com/110575Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The recent improvements to the prove pass
make it possible to provide bounds
hints to the compiler in some bvec routines.

This speeds up the compilation of the code in

name  old time/op       new time/op       delta
Pkg         7.93s ± 4%        7.69s ± 3%  -2.98%  (p=0.000 n=29+26)

While we're here, clean up some C-isms.

Updates #13554
Updates #20393

Change-Id: I47a0ec68543a9fc95c5359c3f37813fb529cb4f0
Reviewed-on: https://go-review.googlesource.com/110560
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>

This is the scanstack analog of CL 104737,
which made a similar change for copystack.

name         old time/op  new time/op  delta
ScanStack-8  41.1ms ± 6%  38.9ms ± 5%  -5.52%  (p=0.000 n=50+48)

Change-Id: I7427151dea2895ed3934f8a0f61d96b568019217
Reviewed-on: https://go-review.googlesource.com/105536
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>

There are many possible stack scanning benchmarks,
but this one is at least a start.

cpuprofiling shows about 75% of CPU in func scanstack.

Change-Id: I906b0493966f2165c1920636c4e057d16d6447e0
Reviewed-on: https://go-review.googlesource.com/105535
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>

Pick the low-hanging fruit, which are the gotos that don't go very far
and labels that aren't used often. All of them have easy replacements
with breaks and returns.

One slightly tricky rewrite is defaultlitreuse. We cannot use a defer
func to reset lineno, because one of its return paths does not reset
lineno, and thus broke toolstash -cmp.

Passes toolstash -cmp on std cmd.

Change-Id: Id1c0967868d69bb073addc7c5c3017ca91ff966f
Reviewed-on: https://go-review.googlesource.com/110063
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>

It was skipping dirs starting with ".", but it was missing the "_"
prefix and the "testdata" name. From "go help packages":

	Directory and file names that begin with "." or "_" are ignored
	by the go tool, as are directories named "testdata".

Before the change:

	$ go doc z # using src/cmd/go/testdata/testvendor/src/q/z
	package z // import "."

After the fix, it falls back to the current directory, as expected when
a single argument isn't found as a package in $GOPATH.

TestMain needs a small adjustment to keep the tests working, as now
their use of cmd/doc/testdata would normally not work.

This is the second try for this fix; the first time around, we included
cmd/doc/testdata to the dirs list by sending it to the channel via a
goroutine. However, that can end up in a send to a closed channel, if
GOROOT is a very small directory tree or missing.

To avoid that possibility, include the extra directory by pre-populating
the paths list, before the walking of GOROOT and GOPATH actually starts.

Fixes #24462.

Change-Id: I3b95b6431578e0d5cbb8342f305debc4ccb5f656
Reviewed-on: https://go-review.googlesource.com/109216
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Passes toolstash -cmp on std cmd.

Change-Id: I17b9a816752af55b064b8e46146b8f5a878fa560
Reviewed-on: https://go-review.googlesource.com/109075
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>

Update #17490

Change-Id: Ia0bb0ba10dc0bbb299290a60b8228275d55125d7
Reviewed-on: https://go-review.googlesource.com/110438
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Moving mmap, munmap, madvise, usleep.

Also introduce __error function to get at libc's errno variable.

Change-Id: Ic47ac1d9eb71c64ba2668ce304644dd7e5bdfb5a
Reviewed-on: https://go-review.googlesource.com/110437
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>