Generated by x86test, from https://golang.org/cl/18842
(still in progress).

The commented out lines are either missing or misspelled
or incorrectly handled instructions.

For #4816, #8037, #13822, #14068, #14069.

Change-Id: If309310c97d9d2a3c71fc64c51d4a957e9076ab7
Reviewed-on: https://go-review.googlesource.com/18850Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Not much testing yet, but the test now exists.

Another step toward #13822.

Change-Id: Idb2b06bf53a6113c83008150b4c0b631bb195279
Reviewed-on: https://go-review.googlesource.com/18844Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>

Tests for this and many other instructions are in a separate followup CL.

For #14068.

Change-Id: I6955315996a34d7fb79369b9d9a0119d11745e85
Reviewed-on: https://go-review.googlesource.com/18849Reviewed-by: Rob Pike <r@golang.org>

Ilya added POPCNT in a CL earlier this month but it's really only POPCNTQ.
The other forms still need to be added.

For #4816.

Change-Id: I1186850d32ad6d5777475c7808e6fc9d9133e118
Reviewed-on: https://go-review.googlesource.com/18848Reviewed-by: Rob Pike <r@golang.org>

Change-Id: I5b749c575e0ec78fb3c50d056899bd1fe5d91853
Reviewed-on: https://go-review.googlesource.com/18847Reviewed-by: Rob Pike <r@golang.org>

Not recognized in any instructions yet, but this lets the
assembler parse them at least.

For #14068.

Change-Id: Id4f7329a969b747a867ce261b20165fab2cdcab8
Reviewed-on: https://go-review.googlesource.com/18846Reviewed-by: Rob Pike <r@golang.org>

Also, remove output file if there are encoding errors.
The extra reports are convenient.
Removing the output file is very important.
Noticed while testing.

Change-Id: I0fab17d4078f93c5a0d6d1217d8d9a63ac789696
Reviewed-on: https://go-review.googlesource.com/18845Reviewed-by: Rob Pike <r@golang.org>

Instead of two parallel files that look almost identical,
mark the expected differences in the original file.

The annotations being added here keep the tests passing,
but they also make clear a number of printing or parsing
errors that were not as easily seen when the data was
split across two files.

Fix a few diagnostic problems in cmd/internal/obj as well.

A step toward #13822.

Change-Id: I997172681ea6fa7da915ff0f0ab93d2b76f8dce2
Reviewed-on: https://go-review.googlesource.com/18823
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: I2609660b10a16ec2a256fc9c8e046ba4ae67963f
Reviewed-on: https://go-review.googlesource.com/18880Reviewed-by: Ian Lance Taylor <iant@golang.org>

Change-Id: Ica7f2a000eb1d89d5b02cb8c6f1596ddc04bfb26
Reviewed-on: https://go-review.googlesource.com/18890Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes #14050.

Change-Id: I2d9c32213b0da35703edf28f92ed3efb23325921
Reviewed-on: https://go-review.googlesource.com/18792
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Add docs for valid uses of Pointer.
Then document change made for #13372 in CL 18584.

Fixes #8994.

Change-Id: Ifba71e5aeafd11f684aed0b7ddacf3c8ec07c580
Reviewed-on: https://go-review.googlesource.com/18640Reviewed-by: Alan Donovan <adonovan@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>

Change-Id: I43458ce0e78ffc3d0943d28dc8df8e1c9e4cf679
Reviewed-on: https://go-review.googlesource.com/18821Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

- obtained by running sh vendor.bash
- contains updated tests and some bug fixes for Montgomery mult.
  (not used by compiler)
- for consistency of math/big versions only

Change-Id: Ib47e48d5b7f6d0e05d7837b1bc74bdb03f2b094e
Reviewed-on: https://go-review.googlesource.com/18831
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Change-Id: I4816a788e7b89b76dc70d05f4b176e99684d0680
Reviewed-on: https://go-review.googlesource.com/18830
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

It doesn't work and I don't know why.

Update #14063.

Change-Id: I42735012cf6247eca5336f29fcf713e08c8477f8
Reviewed-on: https://go-review.googlesource.com/18817
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Change-Id: Id82209dc313fa6b54e623eb325412737e7a055fe
Reviewed-on: https://go-review.googlesource.com/18794Reviewed-by: Andrew Gerrand <adg@golang.org>

On NetBSD a signal handler returns to the kernel by calling the
setcontext system call with the context passed to the signal handler.
The implementation of runtime·sigreturn_tramp for amd64, copied from the
NetBSD libc, expects that context address to be in r15.  That works in
the NetBSD libc because r15 is preserved across the call to the signal
handler.  It fails in the Go library because r15 is not preserved.
There are various ways to fix this; this one uses the simple approach,
essentially identical to the one in the NetBSD libc, of preserving r15
across the signal handler proper.

Looking at the code for 386 and arm suggests that they are OK.  However,
I have not actually tested them.

Update #14052.

Change-Id: I2b516b1d05fe5d3b8911e65ca761d621dc37fa1b
Reviewed-on: https://go-review.googlesource.com/18815
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

On NetBSD and DragonFly a newly created thread inherits the signal stack
of the creating thread.  This breaks horribly if both threads get a
signal at the same time.  Fix this by dropping the signal stack in the
newly created thread.  The right signal stack will then get installed
later.

Note that cgo code that calls pthread_create will have the wrong,
duplicated, signal stack in the newly created thread.  I don't see any
way to fix that in Go.  People using cgo to call pthread_create will
have to be aware of the problem.

Fixes #13945.
Fixes #13947.

Change-Id: I0c7bd2cdf9ada575d57182ca5e9523060de34931
Reviewed-on: https://go-review.googlesource.com/18814
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

The TestInterfaceAddrsWithNetsh Windows unit test parses and compares the
output of the "netsh" command against more low level Windows API calls. In
at least two cases, some quirks of netsh cause these comparisons to fail.

One example appears to be wi-fi adapters. After a reboot, before it has
been allowed to connect to a network, netsh for IPv4 will not show an
address, whereas netsh for IPv6 will. If the interface is allowed to
connect, and then disconnected, netsh for IPv4 now shows an address and
the test will pass.

The fix is to not compare netsh output if the interface is down.

A related issue is that the IPv6 version of "netsh" can return an
IPv4-embedded IPv6 address where the IPv4 component of the address
is in decimal form, whilst the test is expecting hexadecimal form.

For example, output might be:

  Address fe80::5efe:192.168.1.7%6 Parameters
    ...

Whilst this is valid notation, the fix is to recognise this format in the
"netsh" output and re-parse the address into the all-hexadecimal
representation that the test is expecting.

Fixes #13981

Change-Id: Ie8366673f4d43d07bad80d6d5d1d6e33f654b6cc
Reviewed-on: https://go-review.googlesource.com/18711Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

LoadX509KeyPair and X509KeyPair don't retain the parsed form of
certificates in their return value because it's generally not needed.
This change makes that clear in the comment.

See https://groups.google.com/d/msg/golang-dev/VResvFj2vF8/Wt6WkVT2AwAJ

Change-Id: Ibb759cd6e84c00f4450a012992088422c0546638
Reviewed-on: https://go-review.googlesource.com/18734Reviewed-by: Russ Cox <rsc@golang.org>

The header was in the wrong place, so the definition of a pipeline
was not in the section labeled "Pipelines".

Fixes #13972

Change-Id: Ibca791a4511ca112047b57091c391f6e959fdd78
Reviewed-on: https://go-review.googlesource.com/18775Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>

On HTTP redirect, the HTTP client creates a new request and don't copy
over the Cancel channel. This prevents any redirected request from being
cancelled.

Fixes #14053

Change-Id: I467cdd4aadcae8351b6e9733fc582b7985b8b9d3
Reviewed-on: https://go-review.googlesource.com/18810Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #14007.

Change-Id: I1f73dfccb466d8fd00efbd8c92a31ac538bf5988
Reviewed-on: https://go-review.googlesource.com/18731Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Updates x/net/http2 to git rev b2ed34f for https://golang.org/cl/18727

Updates #14029 (fixes it enough for Go 1.6)
Fixes #13961

Change-Id: Id301247545507671f4e79df0e7c6ec9c421d5a7c
Reviewed-on: https://go-review.googlesource.com/18728
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>

https://golang.org/s/execmodes defines rules for how multiple codes of a go
package work when they end up in the address space of a single process, but
currently the linker blows up in this situation. Fix that by loading all .a
files before any .so files and ignoring duplicate symbols found when loading
shared libraries.

I know this is very very late for 1.6 but at least it should clearly not have
any effect when shared libraries are not in use.

Change-Id: I512ac912937e7502ff58eb5628b658ecce3c38e5
Reviewed-on: https://go-review.googlesource.com/18714Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>

so that runtime/race tests are included in the race builder.

Update #14011.

Change-Id: I04ac6e47366fdb1fe84ba89da556c6d38f7d4a47
Reviewed-on: https://go-review.googlesource.com/18686
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #14010.

Change-Id: Idfd4b063eecf453fe00f3e798099023707a65963
Reviewed-on: https://go-review.googlesource.com/18738Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>

I'm not sure what the convert function was intended to be.

Fixes #14011

Change-Id: I29d905bc1827936b9433b20b13b7a0b0ac5f502e
Reviewed-on: https://go-review.googlesource.com/18712Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: Ie8cb7c7428ae9026c11643b22f9ecf7977e25f5f
Reviewed-on: https://go-review.googlesource.com/18737Reviewed-by: Russ Cox <rsc@golang.org>

Fixes #14006.

Change-Id: Ia819073677ad6993c02255e23760ee21598427b4
Reviewed-on: https://go-review.googlesource.com/18736
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #13977.

Change-Id: Icf54b4d2d746d30da207d1e17c975d18188b1cf8
Reviewed-on: https://go-review.googlesource.com/18702
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>

The linker already applies the fix for elf32, so this just extends it to elf64.

Inspired by https://github.com/pwaller/goupx

Fixes #13974

Change-Id: I65d92b5be9590657060a0e8e80ff5b86ba40017f
Reviewed-on: https://go-review.googlesource.com/18690Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

The timeout means that TestSpecialDomainName will not hang if
the DNS server does not respond to the request.

Fixes #13939

Change-Id: I46e30bbd3c11b6c560656134e704331cf6f8af3f
Reviewed-on: https://go-review.googlesource.com/18661Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Updates x/net/http2 to git rev 72aa00c6 for https://golang.org/cl/18721
(but actually at https://golang.org/cl/18722 now)

Fixes #14008

Change-Id: If05d5ad51ec0ba5ba7e4fe16605c0a83f0484bc8
Reviewed-on: https://go-review.googlesource.com/18723
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Both mips64 architectures share the same runtime/rt0 file, so
we have to hardcode them in buildall.bash.

Ideally we should have cmd/dist report all supported platforms,
see #12270.

Change-Id: I08ce35cfe0a831af5e1e8255b305efd38386fa52
Reviewed-on: https://go-review.googlesource.com/18687Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: I7ccf1b5001d77c4390479f53c0137ab02f98595b
Reviewed-on: https://go-review.googlesource.com/18685
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

No need to say "by default" because there is no alternative and no way
to override. Always HTTP/2.0 is officially spelled HTTP/2 these days.

Fixes #13985 harder

Change-Id: Ib1ec03cec171ca865342b8e7452cd4c707d7b770
Reviewed-on: https://go-review.googlesource.com/18720Reviewed-by: Rob Pike <r@golang.org>

Updates x/net/http2 to git rev 5c0dae8 for https://golang.org/cl/18709

Fixes #14003

Change-Id: I8bc205d6d089107b017e3458bbc7e05f6d0cae60
Reviewed-on: https://go-review.googlesource.com/18730Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #14001

Change-Id: I6f9bc3028345081758d8f537c3aaddb2e254e69e
Reviewed-on: https://go-review.googlesource.com/18708Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>