- 05 Apr, 2017 8 commits
-
-
Russ Cox authored
Fixes #19276. Change-Id: I64f8f80331d09956b6698c0b004ed7f7d70857fc Reviewed-on: https://go-review.googlesource.com/39591 Run-TryBot: Russ Cox <rsc@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
-
Russ Cox authored
This was fixed in CL 37598 but the test was (rightly) dropped because it modified $GOROOT. Here's a variant that does not. For #19151. Change-Id: Iccdbbf9ae8ac4c252e52f4f8ff996963573c4682 Reviewed-on: https://go-review.googlesource.com/39592 Run-TryBot: Russ Cox <rsc@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Ian Lance Taylor <iant@golang.org>
-
Austin Clements authored
Commit 44ed88a5 moved printing of the "sweep done" gcpacertrace message so that it is printed when the final sweeper finishes. However, by this point some other thread has often already observed that there are no more spans to sweep and zeroed sweepPagesPerByte. Avoid printing a 0 sweep ratio in the trace when this race happens by getting the value of the sweep ratio upon entry to sweepone and printing that. Change-Id: Iac0c48ae899e12f193267cdfb012c921f8b71c85 Reviewed-on: https://go-review.googlesource.com/39492 Run-TryBot: Austin Clements <austin@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Rick Hudson <rlh@golang.org>
-
Josh Bleecher Snyder authored
Change-Id: Iaeb7bcbcdbc46c0e0e40b0aa070c706e0ca53013 Reviewed-on: https://go-review.googlesource.com/39555 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Lynn Boger authored
The comments in this package state that users should be migrating code that uses the syscall package to its corresponding package in x/sys. However, the syscall.Signal and syscall.Errno types and the syscall.SysProcAttr struct is not defined in the x/sys package and still need to be referenced from within syscall. This adds a change to the comments to clarify that the migration will need to continue to use some references to syscall for now. Fixes #19560 Change-Id: I8abb96b93bea90070ce461da16dc7bcf7b4b29c1 Reviewed-on: https://go-review.googlesource.com/39450Reviewed-by: Rob Pike <r@golang.org>
-
Russ Cox authored
Followup to CL 39152. Change-Id: I9bfed0c6071ea3d3a43294a6c4a50edc131368cf Reviewed-on: https://go-review.googlesource.com/39313 Run-TryBot: Russ Cox <rsc@golang.org> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Lorenzo Masini authored
Added -S flag to print go source file line above corresponding disassembly: $ go tool objdump -S -s main.main fmthello TEXT main.main(SB) /home/rugginoso/Documents/src/go/src/cmd/objdump/testdata/fmthello.go func main() { 0x47d450 64488b0c25f8ffffff FS MOVQ FS:0xfffffff8, CX 0x47d459 483b6110 CMPQ 0x10(CX), SP 0x47d45d 7631 JBE 0x47d490 0x47d45f 4883ec18 SUBQ $0x18, SP 0x47d463 48896c2410 MOVQ BP, 0x10(SP) 0x47d468 488d6c2410 LEAQ 0x10(SP), BP Println("hello, world") 0x47d46d 488d0563b00200 LEAQ 0x2b063(IP), AX 0x47d474 48890424 MOVQ AX, 0(SP) 0x47d478 48c74424080c000000 MOVQ $0xc, 0x8(SP) 0x47d481 e81a000000 CALL main.Println(SB) } 0x47d486 488b6c2410 MOVQ 0x10(SP), BP 0x47d48b 4883c418 ADDQ $0x18, SP 0x47d48f c3 RET func main() { 0x47d490 e8ebf1fcff CALL runtime.morestack_noctxt(SB) 0x47d495 ebb9 JMP main.main(SB) Execution time: $ time go tool objdump testdata/fmthello > /dev/null real 0m0.430s user 0m0.440s sys 0m0.000s $ time go tool objdump -S testdata/fmthello > /dev/null real 0m0.471s user 0m0.476s sys 0m0.012s Fixes #18245 Change-Id: I9b2f8338f9ee443c1352efd270d3ba85e3dd9b78 Reviewed-on: https://go-review.googlesource.com/37953 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org>
-
Alex Brainman authored
For #17540. Change-Id: Ie01f39797526934fa553f4279cbde6c7cbf14154 Reviewed-on: https://go-review.googlesource.com/36854Reviewed-by: Ian Lance Taylor <iant@golang.org> Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
- 04 Apr, 2017 6 commits
-
-
Josh Bleecher Snyder authored
This is a holdover from the days when we did not have full SSA coverage and compiled things optimistically, and catching the panic obscures useful information. Change-Id: I196790cb6b97419d92b318a2dfa7f1e1097cefb7 Reviewed-on: https://go-review.googlesource.com/39534 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> Reviewed-by: Keith Randall <khr@golang.org>
-
Josh Bleecher Snyder authored
CL 38801 introduced automatic commutative rule generation. Manual order canonicalization rules thus lead to infinite loops. Fixes #19842 Change-Id: I877c476152f4d207fdc67bc6f3018265aa9bc5ac Reviewed-on: https://go-review.googlesource.com/39533 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org>
-
Filip Gruszczyński authored
Providing size hint when creating a map allows avoiding re-allocating underlying data structure if we know how many elements are going to be inserted. This can be used for example during decoding maps in gob. Fixes #19599 Change-Id: I108035fec29391215d2261a73eaed1310b46bab1 Reviewed-on: https://go-review.googlesource.com/38335Reviewed-by: Rob Pike <r@golang.org> Reviewed-by: Ian Lance Taylor <iant@golang.org>
-
Rob Pike authored
This was a subtle bug introduced in the previous release's fix for issue 16156. The definition of empty template was broken, causing the answer to depend on the order of templates in the map. Fixes #16156 (for real). Fixes #19294. Fixes #19204. Change-Id: I1cd915c94534cad3116d83bd158cbc28700510b9 Reviewed-on: https://go-review.googlesource.com/38420 Run-TryBot: Russ Cox <rsc@golang.org> Reviewed-by: Russ Cox <rsc@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Martin Möhrmann authored
- use a string lookup to detect if a single byte is a space character - determine the exact number of fields for ASCII and a possibly underestimated number of fields for non ASCII strings by doing a separate byte for byte scan of the input string before collecting the fields in an extra pass - provide a fast path for ASCII only strings when collecting the fields - avoid utf8.DecodeRuneInString and unicode.IsSpace for ASCII characters Used golang.org/cl/33108 from Joe Tsai as starting point. name old time/op new time/op delta Fields/ASCII/16 284ns ± 1% 116ns ± 2% -59.30% (p=0.000 n=9+10) Fields/ASCII/256 3.81µs ± 1% 0.80µs ± 1% -79.10% (p=0.000 n=10+10) Fields/ASCII/4096 61.4µs ± 1% 12.3µs ± 1% -79.96% (p=0.000 n=10+9) Fields/ASCII/65536 982µs ± 1% 235µs ± 0% -76.04% (p=0.000 n=10+9) Fields/ASCII/1048576 16.7ms ± 2% 5.4ms ± 1% -67.52% (p=0.000 n=10+10) Fields/Mixed/16 314ns ± 1% 168ns ± 1% -46.33% (p=0.000 n=9+10) Fields/Mixed/256 3.92µs ± 1% 1.17µs ± 1% -70.19% (p=0.000 n=10+10) Fields/Mixed/4096 69.1µs ± 1% 19.0µs ± 1% -72.53% (p=0.000 n=10+10) Fields/Mixed/65536 1.12ms ± 1% 0.39ms ± 0% -65.37% (p=0.000 n=10+9) Fields/Mixed/1048576 19.0ms ± 2% 7.3ms ± 4% -61.75% (p=0.000 n=10+9) name old speed new speed delta Fields/ASCII/16 56.3MB/s ± 1% 138.1MB/s ± 2% +145.31% (p=0.000 n=9+10) Fields/ASCII/256 67.1MB/s ± 1% 321.0MB/s ± 1% +378.26% (p=0.000 n=10+10) Fields/ASCII/4096 66.7MB/s ± 1% 333.0MB/s ± 1% +398.97% (p=0.000 n=10+9) Fields/ASCII/65536 66.7MB/s ± 1% 278.4MB/s ± 0% +317.39% (p=0.000 n=10+9) Fields/ASCII/1048576 62.7MB/s ± 2% 192.9MB/s ± 1% +207.82% (p=0.000 n=10+10) Fields/Mixed/16 51.0MB/s ± 2% 94.9MB/s ± 1% +85.87% (p=0.000 n=10+10) Fields/Mixed/256 65.4MB/s ± 1% 219.2MB/s ± 1% +235.33% (p=0.000 n=10+10) Fields/Mixed/4096 59.3MB/s ± 1% 215.7MB/s ± 1% +263.98% (p=0.000 n=10+10) Fields/Mixed/65536 58.6MB/s ± 1% 169.1MB/s ± 0% +188.73% (p=0.000 n=10+9) Fields/Mixed/1048576 55.1MB/s ± 2% 144.0MB/s ± 4% +161.44% (p=0.000 n=10+9) Updates #19789 Updates #17856 Change-Id: If2ce1479542702e9cd65a82a462ba55ac8eb3876 Reviewed-on: https://go-review.googlesource.com/37959 Run-TryBot: Martin Möhrmann <moehrmann@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
-
Keith Randall authored
Popcount instructions on amd64 are not guaranteed to be present, so we must guard their call. Rewrite rules can't generate control flow at the moment, so the intrinsifier needs to generate that code. name old time/op new time/op delta OnesCount-8 2.47ns ± 5% 1.04ns ± 2% -57.70% (p=0.000 n=10+10) OnesCount16-8 1.05ns ± 1% 0.78ns ± 0% -25.56% (p=0.000 n=9+8) OnesCount32-8 1.63ns ± 5% 1.04ns ± 2% -35.96% (p=0.000 n=10+10) OnesCount64-8 2.45ns ± 0% 1.04ns ± 1% -57.55% (p=0.000 n=6+10) Update #18616 Change-Id: I4aff2cc9aa93787898d7b22055fe272a7cf95673 Reviewed-on: https://go-review.googlesource.com/38320 Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Robert Griesemer <gri@golang.org>
-
- 03 Apr, 2017 19 commits
-
-
Eric Lagergren authored
The recently updated Count functions declare variables before special-cased returns. Change-Id: I8f726118336b7b0ff72117d12adc48b6e37e60ea Reviewed-on: https://go-review.googlesource.com/39357Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Josh Bleecher Snyder authored
This provides better diagnostics when it occurs. Updates #19751 Change-Id: I87db54c22e1345891b418c1741dc76ac5fb8ed00 Reviewed-on: https://go-review.googlesource.com/39358 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
-
Eric Lagergren authored
Change-Id: I1f1cfb161640eb8756fb1a283892d06b30b7a8fa Reviewed-on: https://go-review.googlesource.com/39356Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Josh Bleecher Snyder authored
When a map is small, it's not worth putting the contents in an array and then looping over the array. Just generate code instead. This makes smaller binaries. It might also be better for cache lines. It also can avoids adding control flow in the middle of the init function, which can be very large. Eliminating this source of extra blocks makes phi insertion easier for temp-heavy init functions. This reduces the time required for compiler to panic while compiling the code in #19751 from 15 minutes to 45 seconds. The cutoff of 25 was chosen fairly unscientifically by looking at the size of cmd/go. Cutoff of 0: 10689604 Cutoff of 5: 10683572 Cutoff of 15: 10682324 Cutoff of 25: 10681700 Cutoff of 50: 10685476 Cutoff of 100: 10689412 There are probably more sophisticated mechanisms available. For example, the smaller the key/value sizes, the better generated code will be vs a table. Nevertheless this is simple and seems like a good start. Updates #19751 name old time/op new time/op delta Template 204ms ± 6% 202ms ± 5% -0.78% (p=0.027 n=47+45) Unicode 84.8ms ± 6% 85.2ms ± 7% ~ (p=0.146 n=46+45) GoTypes 551ms ± 2% 556ms ± 3% +0.76% (p=0.004 n=43+45) SSA 3.93s ± 3% 3.95s ± 4% ~ (p=0.179 n=50+49) Flate 123ms ± 4% 123ms ± 5% ~ (p=0.201 n=47+49) GoParser 145ms ± 3% 145ms ± 4% ~ (p=0.937 n=50+50) Reflect 356ms ± 3% 354ms ± 5% -0.44% (p=0.048 n=46+50) Tar 107ms ± 6% 106ms ± 6% ~ (p=0.188 n=50+49) XML 201ms ± 4% 200ms ± 4% ~ (p=0.085 n=50+49) name old user-ns/op new user-ns/op delta Template 252M ± 9% 250M ± 7% ~ (p=0.206 n=49+47) Unicode 106M ± 7% 106M ± 9% ~ (p=0.331 n=47+46) GoTypes 724M ± 5% 729M ± 5% ~ (p=0.160 n=47+49) SSA 5.64G ± 2% 5.62G ± 4% ~ (p=0.148 n=47+50) Flate 147M ± 6% 147M ± 5% ~ (p=0.466 n=50+49) GoParser 179M ± 5% 179M ± 6% ~ (p=0.584 n=50+49) Reflect 448M ± 6% 441M ± 8% -1.39% (p=0.027 n=50+49) Tar 124M ± 6% 123M ± 5% ~ (p=0.221 n=50+47) XML 244M ± 5% 243M ± 4% ~ (p=0.275 n=49+49) name old alloc/op new alloc/op delta Template 39.9MB ± 0% 39.4MB ± 0% -1.28% (p=0.008 n=5+5) Unicode 29.8MB ± 0% 29.8MB ± 0% ~ (p=0.310 n=5+5) GoTypes 113MB ± 0% 113MB ± 0% ~ (p=0.421 n=5+5) SSA 854MB ± 0% 854MB ± 0% ~ (p=0.151 n=5+5) Flate 25.3MB ± 0% 25.3MB ± 0% ~ (p=1.000 n=5+5) GoParser 31.8MB ± 0% 31.8MB ± 0% ~ (p=0.222 n=5+5) Reflect 78.2MB ± 0% 78.2MB ± 0% ~ (p=1.000 n=5+5) Tar 26.7MB ± 0% 26.7MB ± 0% ~ (p=0.841 n=5+5) XML 42.3MB ± 0% 42.3MB ± 0% -0.15% (p=0.008 n=5+5) name old allocs/op new allocs/op delta Template 390k ± 1% 386k ± 1% -1.05% (p=0.016 n=5+5) Unicode 319k ± 0% 320k ± 0% ~ (p=0.310 n=5+5) GoTypes 1.14M ± 0% 1.14M ± 0% ~ (p=0.421 n=5+5) SSA 7.60M ± 0% 7.59M ± 0% ~ (p=0.310 n=5+5) Flate 234k ± 0% 235k ± 1% ~ (p=1.000 n=5+5) GoParser 315k ± 1% 317k ± 0% ~ (p=0.151 n=5+5) Reflect 978k ± 0% 978k ± 0% ~ (p=0.841 n=5+5) Tar 251k ± 1% 251k ± 1% ~ (p=0.690 n=5+5) XML 394k ± 0% 392k ± 0% ~ (p=0.056 n=5+5) Change-Id: Ic53a18627082abe075a1cbc33330ce015e50850a Reviewed-on: https://go-review.googlesource.com/39354 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org>
-
Keith Randall authored
Note that this is a redo of an undo of the original buggy CL 38666. We have lots of rewrite rules that vary only in the fact that we have 2 versions for the 2 different orderings of various commuting ops. For example: (ADDL x (MOVLconst [c])) -> (ADDLconst [c] x) (ADDL (MOVLconst [c]) x) -> (ADDLconst [c] x) It can get unwieldly quickly, especially when there is more than one commuting op in a rule. Our existing "fix" for this problem is to have rules that canonicalize the operations first. For example: (Eq64 x (Const64 <t> [c])) && x.Op != OpConst64 -> (Eq64 (Const64 <t> [c]) x) Subsequent rules can then assume if there is a constant arg to Eq64, it will be the first one. This fix kinda works, but it is fragile and only works when we remember to include the required extra rules. The fundamental problem is that the rule matcher doesn't know anything about commuting ops. This CL fixes that fact. We already have information about which ops commute. (The register allocator takes advantage of commutivity.) The rule generator now automatically generates multiple rules for a single source rule when there are commutative ops in the rule. We can now drop all of our almost-duplicate source-level rules and the canonicalization rules. I have some CLs in progress that will be a lot less verbose when the rule generator handles commutivity for me. I had to reorganize the load-combining rules a bit. The 8-way OR rules generated 128 different reorderings, which was causing the generator to put too much code in the rewrite*.go files (the big ones were going from 25K lines to 132K lines). Instead I reorganized the rules to combine pairs of loads at a time. The generated rule files are now actually a bit (5%) smaller. Make.bash times are ~unchanged. Compiler benchmarks are not observably different. Probably because we don't spend much compiler time in rule matching anyway. I've also done a pass over all of our ops adding commutative markings for ops which hadn't had them previously. Fixes #18292 Change-Id: Ic1c0e43fbf579539f459971625f69690c9ab8805 Reviewed-on: https://go-review.googlesource.com/38801 Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: David Chase <drchase@google.com>
-
Keith Randall authored
x*2 -> x+x x/c, c power of 2 -> x*(1/c) Fixes #19827 Change-Id: I74c9f0b5b49b2ed26c0990314c7d1d5f9631b6f1 Reviewed-on: https://go-review.googlesource.com/39295 Run-TryBot: Keith Randall <khr@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: David Chase <drchase@google.com>
-
Josh Bleecher Snyder authored
Instead of walking the list of nodes twice, once to find static entries to add to an array and once to find dynamic entries to generate code for, do the split once up front, into two slices. Then process each slice individually. This makes the code easier to read and more importantly, easier to modify. While we're here, add a TODO to avoid using temporaries for mapassign_fast calls. It's not an important TODO; the generated code would be basically identical. It would just avoid a minor amount of pointless SSA optimization work. Passes toolstash-check. No measureable compiler performance impact. Updates #19751 Change-Id: I84a8f2c22f9025c718ef34639059d7bd02a3c406 Reviewed-on: https://go-review.googlesource.com/39351 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Russ Cox authored
Fixes #19829. Change-Id: I8500fd73c37b504d6ea25f5aff7017fbc0718570 Reviewed-on: https://go-review.googlesource.com/39314 Run-TryBot: Russ Cox <rsc@golang.org> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Brad Fitzpatrick authored
Updates #13560 Change-Id: I9bc08ca5cf0627e653d55f748ebb83be8b69ea3b Reviewed-on: https://go-review.googlesource.com/39296 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> Reviewed-by: Rob Pike <r@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Josh Bleecher Snyder authored
This triggers 119 times during make.bash. This CL reduces the time it takes for the compiler to panic while compiling the code in #19751 from 22 minutes to 15 minutes. Yay, I guess. Updates #19751 Change-Id: I8ca7f1ae75f89d1eb2a361d67b3055a975221734 Reviewed-on: https://go-review.googlesource.com/39294 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org>
-
David Chase authored
Old buggy hardware incorrectly executes the shift-left-K then shift-right-K idiom for clearing K leftmost bits. Use a right rotate instead of shift to avoid triggering the bug. Fixes #19809. Change-Id: I6dc646b183c29e9d01aef944729f34388dcc687d Reviewed-on: https://go-review.googlesource.com/39310 Run-TryBot: David Chase <drchase@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Russ Cox <rsc@golang.org>
-
Daniel Martí authored
The example shouldn't rely on the existance of example_test.go. That breaks in the playground, which is what the "run" button in https://golang.org/pkg/go/parser/#example_ParseFile does. Make the example self-sufficient by using a small piece of source via a string literal instead. Fixes #19823. Change-Id: Ie8a3c6c5d00724e38ff727862b62e6a3621adc88 Reviewed-on: https://go-review.googlesource.com/39236 Run-TryBot: Daniel Martí <mvdan@mvdan.cc> Reviewed-by: Robert Griesemer <gri@golang.org>
-
Josh Bleecher Snyder authored
In a concurrent backend, Ctxt.Lookup will need some form of concurrency protection, which will make it more expensive. This CL changes the pcln table builder to track filenames as strings rather than LSyms. Those strings are then converted into LSyms at the last moment, for writing the object file. This CL removes over 85% of the calls to Ctxt.Lookup in a run of make.bash. Passes toolstash-check. Updates #15756 Change-Id: I3c53deff6f16f2643169f3bdfcc7aca2ca58b0a4 Reviewed-on: https://go-review.googlesource.com/39291 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Russ Cox authored
When generating a random int8, uint8, int16, uint16, int32, uint32, quick.Value chooses among all possible values. But when generating a random int64 or uint64, it only chooses values in the range [-2⁶², 2⁶²) (even for uint64). It should, like for all the other integers, use the full range. If it had, this would have caught #19807 earlier. Instead it let us discover the presence of #19809. While we are here, also make the default source of randomness not completely deterministic. Fixes #19808. Change-Id: I070f852531c92b3670bd76523326c9132bfc9416 Reviewed-on: https://go-review.googlesource.com/39152 Run-TryBot: Russ Cox <rsc@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Rob Pike <r@golang.org>
-
Russ Cox authored
The header is literally Key: Value If the value or the key has leading or trailing spaces, those will be lost by the round trip. Found because testing/quick returns different values now. Change-Id: I0f574bdbb5990689509c24309854d8f814b5efa0 Reviewed-on: https://go-review.googlesource.com/39211 Run-TryBot: Russ Cox <rsc@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
-
Josh Bleecher Snyder authored
Minor cleanup. This is the only such instance in the compiler. Change-Id: I4e8ecde57d71867c7e1ac4d17e2154a91dd262b0 Reviewed-on: https://go-review.googlesource.com/39209 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> Reviewed-by: Dave Cheney <dave@cheney.net> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Josh Bleecher Snyder authored
Updates #15756 Change-Id: Ic635812b324af926333122c02908cebfb24d7bce Reviewed-on: https://go-review.googlesource.com/39208 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Josh Bleecher Snyder authored
No particular need for this, but it's nice to enforce invariants when they are available. Change-Id: Ia6fa88dc4116f65dac2879509746e123e2c1862a Reviewed-on: https://go-review.googlesource.com/39201 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Matthew Dempsky <mdempsky@google.com>
-
Josh Bleecher Snyder authored
nodfp is a global, so modifying it is unsafe in a concurrent backend. It is also not necessary, since the Used marks are only relevant for nodes in fn.Dcl. For good measure, mark nodfp as always used. Passes toolstash-check. Updates #15756 Change-Id: I5320459f5eced2898615a17b395a10c1064bcaf5 Reviewed-on: https://go-review.googlesource.com/39200 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
-
- 02 Apr, 2017 1 commit
-
-
Cherry Zhang authored
Dupok symbols may be defined in multiple packages. Its associated package is chosen sort of arbitrarily (the first containing package that the linker loads). Canonicalize its package to the package with which it will be laid down in text, which is the first package in dependency order that defines the symbol. So later passes (for example, trampoline insertion pass) know that the dupok symbol is laid down along with the package. Fixes #19764. Change-Id: I7cbc7474ff3016d5069c8b7be04af934abab8bc3 Reviewed-on: https://go-review.googlesource.com/39150 Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com> Reviewed-by: David Chase <drchase@google.com>
-
- 01 Apr, 2017 5 commits
-
-
Dave Cheney authored
Each architecture's Rconv function is only used inside its respective package, so it does not need to be exported. Change-Id: Ifbd629964d7a9edd66501d7cdf4750621d66d646 Reviewed-on: https://go-review.googlesource.com/39110 Run-TryBot: Dave Cheney <dave@cheney.net> Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
-
Jamie Stackhouse authored
This change makes it possible to retrieve the size of a file part without having to Seek to determine file-size. Resolves #19501 Change-Id: I7b9994c4cf41c9b06a046eb7046f8952ae1f15e9 Reviewed-on: https://go-review.googlesource.com/39223Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org> Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Emmanuel Odeke authored
Replace yyerror usages with yyerrorl in function typecheckswitch. Updates #19683. Change-Id: I7188cdecddd2ce4e06b8cee45b57f3765a979405 Reviewed-on: https://go-review.googlesource.com/38597Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com> Reviewed-by: Matthew Dempsky <mdempsky@google.com> Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Robert Griesemer authored
For #13560. Change-Id: I884e63f89d0756ca87b8c2092b4fd8360f791a2f Reviewed-on: https://go-review.googlesource.com/39171 Run-TryBot: Robert Griesemer <gri@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Ian Lance Taylor <iant@golang.org>
-
Josh Bleecher Snyder authored
For backend concurrency safety. Follow-up to CL 38721. This does introduce a Nodes where there wasn't one before, but these are so rare that the performance impact is negligible. Does not pass toolstash-check, but the only change is line numbers, and the new line numbers appear preferable. Updates #15756 name old alloc/op new alloc/op delta Template 39.9MB ± 0% 39.9MB ± 0% ~ (p=0.841 n=5+5) Unicode 29.8MB ± 0% 29.8MB ± 0% ~ (p=0.690 n=5+5) GoTypes 113MB ± 0% 113MB ± 0% +0.09% (p=0.008 n=5+5) SSA 854MB ± 0% 855MB ± 0% ~ (p=0.222 n=5+5) Flate 25.3MB ± 0% 25.3MB ± 0% ~ (p=0.690 n=5+5) GoParser 31.8MB ± 0% 31.9MB ± 0% ~ (p=0.421 n=5+5) Reflect 78.2MB ± 0% 78.3MB ± 0% ~ (p=0.548 n=5+5) Tar 26.7MB ± 0% 26.7MB ± 0% ~ (p=0.690 n=5+5) XML 42.3MB ± 0% 42.3MB ± 0% ~ (p=0.222 n=5+5) name old allocs/op new allocs/op delta Template 391k ± 1% 391k ± 0% ~ (p=0.841 n=5+5) Unicode 320k ± 0% 320k ± 0% ~ (p=0.841 n=5+5) GoTypes 1.14M ± 0% 1.14M ± 0% +0.26% (p=0.008 n=5+5) SSA 7.60M ± 0% 7.60M ± 0% ~ (p=0.548 n=5+5) Flate 234k ± 0% 234k ± 1% ~ (p=1.000 n=5+5) GoParser 316k ± 1% 317k ± 0% ~ (p=0.841 n=5+5) Reflect 979k ± 0% 980k ± 0% ~ (p=0.690 n=5+5) Tar 251k ± 1% 251k ± 0% ~ (p=0.595 n=5+5) XML 394k ± 0% 393k ± 0% ~ (p=0.222 n=5+5) Change-Id: I237ae5502db4560f78ce021dc62f6d289797afd6 Reviewed-on: https://go-review.googlesource.com/39197 Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: Robert Griesemer <gri@golang.org>
-
- 31 Mar, 2017 1 commit
-
-
Josh Bleecher Snyder authored
Follow-up to review comments on CL 39193. Change-Id: I7649af9d70ad73e039061a7a66fea416a7476192 Reviewed-on: https://go-review.googlesource.com/39199Reviewed-by: Robert Griesemer <gri@golang.org>
-