This is what led to https://golang.org/cl/20763 and
https://golang.org/cl/20765 to shrink binary sizes.

Change-Id: Id360d474e6153cfe32a525b0a720810fd113195b
Reviewed-on: https://go-review.googlesource.com/22392Reviewed-by: David Crawshaw <crawshaw@golang.org>

Now that we're using 32-bit ops for 8/16-bit logical operations
(to avoid partial register stalls), there's really no need to
keep track of the 8/16-bit ops at all.  Convert everything we
can to 32-bit ops.

This CL is the obvious stuff.  I might think a bit more about
whether we can get rid of weirder stuff like HMULWU.

The only downside to this CL is that we lose some information
about constants.  If we had source like:
  var a byte = ...
  a += 128
  a += 128
We will convert that to a += 256, when we could get rid of the
add altogether.  This seems like a fairly unusual scenario and
I'm happy with forgoing that optimization.

Change-Id: Ia7c1e5203d0d110807da69ed646535194a3efba1
Reviewed-on: https://go-review.googlesource.com/22382Reviewed-by: Todd Neal <todd@tneal.org>

Combine stores into larger widths when it is safe to do so.

Add clobber() function so stray dead uses do not impede the
above rewrites.

Fix bug in loads where all intermediate values depending on
a small load (not just the load itself) must have no other uses.
We really need the small load to be dead after the rewrite..

Fixes #14267

Change-Id: Ib25666cb19777f65082c76238fba51a76beb5d74
Reviewed-on: https://go-review.googlesource.com/22326
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>

Currently tracer uses global sequencer and it introduces
significant slowdown on parallel machines (up to 10x).
Replace the global sequencer with per-goroutine sequencer.

If we assign per-goroutine sequence numbers to only 3 types
of events (start, unblock and syscall exit), it is enough to
restore consistent partial ordering of all events. Even these
events don't need sequence numbers all the time (if goroutine
starts on the same P where it was unblocked, then start does
not need sequence number).
The burden of restoring the order is put on trace parser.
Details of the algorithm are described in the comments.

On http benchmark with GOMAXPROCS=48:
no tracing: 5026 ns/op
tracing: 27803 ns/op (+453%)
with this change: 6369 ns/op (+26%, mostly for traceback)

Also trace size is reduced by ~22%. Average event size before: 4.63
bytes/event, after: 3.62 bytes/event.

Besides running trace tests, I've also tested with manually broken
cputicks (random skew for each event, per-P skew and episodic random skew).
In all cases broken timestamps were detected and no test failures.

Change-Id: I078bde421ccc386a66f6c2051ab207bcd5613efa
Reviewed-on: https://go-review.googlesource.com/21512
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #15413

Change-Id: I837a391276eed565cf66d3715ec68b7b959ce143
Reviewed-on: https://go-review.googlesource.com/22390Reviewed-by: Andrew Gerrand <adg@golang.org>

Change-Id: Ia3f262f06592b66447c213e2350402cd5e6e2ccd
Reviewed-on: https://go-review.googlesource.com/22389
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Exporting filenames as part of the position information can lead
to different object files which breaks tests.

Change-Id: Ia678ab64293ebf04bf83601e6ba72919d05762a4
Reviewed-on: https://go-review.googlesource.com/22385Reviewed-by: Matthew Dempsky <mdempsky@google.com>

Change-Id: I12d5e5d0e74b354f26898bab4ea30eb27ac45cd7
Reviewed-on: https://go-review.googlesource.com/22387
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #15404

Change-Id: I16f2a34a1e4c3457053a1fc2141f21747cfb22b4
Reviewed-on: https://go-review.googlesource.com/22386Reviewed-by: Matthew Dempsky <mdempsky@google.com>

Prevents denial of service attacks from bogus UDP packets.

Fixes #13281.

Change-Id: Ifb51b17a1b0807bfd27b144d6037431701184e7b
Reviewed-on: https://go-review.googlesource.com/22126Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #14860

Change-Id: Id55ad942d45a104d560a879d6e8e1aa09671789b
Reviewed-on: https://go-review.googlesource.com/22351Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This provides a way to disable the escaping of <, >, and & in JSON
strings.

Fixes #14749.

Change-Id: I1afeb0244455fc8b06c6cce920444532f229555b
Reviewed-on: https://go-review.googlesource.com/21796
Run-TryBot: Caleb Spare <cespare@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Instead of switching on Ctype (which internally uses a type switch)
and then scattering lots of type assertions throughout the CTFOO case
clauses, just use type switches directly on the underlying constant
value.

Passes toolstash/buildall.

Change-Id: I9bc172cc67e5f391cddc15539907883b4010689e
Reviewed-on: https://go-review.googlesource.com/22384
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: I037101b1921fe151695d32e9874b50dd64982298
Reviewed-on: https://go-review.googlesource.com/22314Reviewed-by: Austin Clements <austin@google.com>

Change-Id: Idab5f603c1743895b8f4edbcc55f7be83419a099
Reviewed-on: https://go-review.googlesource.com/22383
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>

CL 22372 changed ppc64le to use normal cgo initialization on ppc64le.
Doing this uncovered a cmd/link error using internal linking.
Opened issue 15409 for the problem.  This CL disables the test.

Update #15409.

Change-Id: Ia1bb6b874c1b5a4df1a0436c8841c145142c30f7
Reviewed-on: https://go-review.googlesource.com/22379
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Generate new protobuf pprof profiles with embed symbol info.
This makes program binary unnecessary.

Change-Id: Ie628439c13c5e34199782031138102c83ea50621
Reviewed-on: https://go-review.googlesource.com/21873Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>

Replaced incorrect recursion-free rendering of DFS with
something that was correct.  Enhanced test with all
permutations of IF successors to ensure that all possible
DFS traversals are exercised.

Test is improved version of
https://go-review.googlesource.com/#/c/22334

Update 15084.

Change-Id: I6e944c41244e47fe5f568dfc2b360ff93b94079e
Reviewed-on: https://go-review.googlesource.com/22347Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>

This reverses the change to this benchmark made in 9b6bf20a.

Change-Id: I79ab88286c3028d3be561957140375bbc413e7ab
Reviewed-on: https://go-review.googlesource.com/22340
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>

The input buffer is aligned to a doubleword boundary to
improve performance of the vector instructions. The pure
Go implementation is used to align the input data, and is
also used when the vector instructions are not available
or the data length is less than 64 bytes.

Change-Id: Ie259a5f2f1562bcc17961c99e5776c99091d6bed
Reviewed-on: https://go-review.googlesource.com/22201Reviewed-by: Michael Munday <munday@ca.ibm.com>
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Remove the "optimization" that was causing the issue.

For the following code the "optimization" was
converting v to (OpCopy x) which is wrong because
x doesn't dominate v.

b1:
    y = ...
    First .. b3
b2:
   x = ...
   Goto b3
b3:
   v = phi x y
   ... use v ...

That "optimization" is likely no longer needed because
we now have a second opt pass with a dce in between
which removes blocks of type First.

For pkg/tools/linux_amd64/* the binary size drops
from 82142886 to 82060034.

Change-Id: I10428abbd8b32c5ca66fec3da2e6f3686dddbe31
Reviewed-on: https://go-review.googlesource.com/22312
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

See discussion at [1]. True value must have a fixed non-zero
representation meaning that a && b can be implemented as a & b.

[1] https://groups.google.com/forum/#!topic/golang-dev/xV0vPuFP9Vg

This change helps with m := a && b, but it's more common to see
if a && b { do something } which is not handled.

Change-Id: Ib6f9ff898a0a8c05d12466e2464e4fe781035394
Reviewed-on: https://go-review.googlesource.com/22313
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

They are guaranteed to be non-nil, no point in inserting
nil checks for them.

Fixes #15390

Change-Id: I3b9a0f2319affc2139dcc446d0a56c6785ae5a86
Reviewed-on: https://go-review.googlesource.com/22291Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>

The special case was because PPC did not support external linking, but
now it does.

Fixes #10410.

Change-Id: I9b024686e0f03da7a44c1c59b41c529802f16ab0
Reviewed-on: https://go-review.googlesource.com/22372
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

linux/amd64 PIE:
	cmd/go:  -62KB (0.5%)
	jujud:  -550KB (0.7%)

For #6853.

Change-Id: Ieb67982abce5832e24b997506f0ae7108f747108
Reviewed-on: https://go-review.googlesource.com/22371
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

linux/amd64:
	cmd/go:   -8KB (basically nothing)

linux/amd64 PIE:
	cmd/go: -191KB (1.6%)
	jujud:  -1.5MB (1.9%)

Updates #6853
Fixes #15064

Change-Id: I0adbb95685e28be92e8548741df0e11daa0a9b5f
Reviewed-on: https://go-review.googlesource.com/21777Reviewed-by: Ian Lance Taylor <iant@golang.org>

Now that reflect.name objects contain an offset to pkgPath instead of a
pointer, there is no need to align the symbol data.

Removes approx. 10KB from the cmd/go binary. The effect becomes more
important later as more type data is moved into name objects.

For #6853

Change-Id: Idb507fdbdad04f16fc224378f82272cb5c236ab7
Reviewed-on: https://go-review.googlesource.com/21776
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Use the compute intermediate message digest (KIMD) instruction
when possible. Adds test to check fallback code path in case
KIMD is not available.

Benchmark changes:
Hash8Bytes  3.4x
Hash1K      9.3x
Hash8K      10.9x

Change-Id: Ibcd71a886dfd7b3822042235b4f4eaa7a148036b
Reviewed-on: https://go-review.googlesource.com/22350
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Document the subtle property that files with equivalent base names
will overwrite extant templates with those same names.

Fixes golang/go#14320

Change-Id: Ie9ace1b08e6896ea599836e31582123169aa7a25
Reviewed-on: https://go-review.googlesource.com/21824Reviewed-by: Rob Pike <r@golang.org>

Before this change, a go-vendor-issue-14613 file would be left in the
working directory after tests run.

Change-Id: If1858421bb287215ab4a19163f489131b2e8912c
Reviewed-on: https://go-review.googlesource.com/22169Reviewed-by: Chris Broadfoot <cbro@golang.org>

Fixes #13808.

Change-Id: Ifbd5644da995a812438a405485c9e08b4503a313
Reviewed-on: https://go-review.googlesource.com/22352Reviewed-by: Ian Lance Taylor <iant@golang.org>

Change-Id: I2275dc703be4fda3feedf76483148eab853b43b8
Reviewed-on: https://go-review.googlesource.com/22360
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>

Change-Id: I6490de325b0f4ba962c679503102d30d41dcc384
Reviewed-on: https://go-review.googlesource.com/22359
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Does anyone actually pass -a to the linker?

Change-Id: I1d31ea66aa5604b7fd42adf15bdab71e9f52d0ed
Reviewed-on: https://go-review.googlesource.com/22356
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>

Change-Id: I4fc35649ff5a3510f5667b62e7e84e113e95dffe
Reviewed-on: https://go-review.googlesource.com/22358Reviewed-by: Rob Pike <r@golang.org>

There should be a unit, and s is the SI unit name, so use that.
The other obvious possibility is ns (nanosecond), but the fact
that durations are measured in nanoseconds is an internal detail.

Fixes #14058.

Change-Id: Id1f8f3c77088224d9f7cd643778713d5cc3be5d9
Reviewed-on: https://go-review.googlesource.com/22357Reviewed-by: Robert Griesemer <gri@golang.org>

Fixes #14004.

$ go doc encoding.gob
Before:
func Register(value interface{})
func RegisterName(name string, value interface{})
func NewDecoder(r io.Reader) *Decoder
func NewEncoder(w io.Writer) *Encoder
type CommonType struct { ... }
type Decoder struct { ... }
type Encoder struct { ... }
type GobDecoder interface { ... }
type GobEncoder interface { ... }

After:
func Register(value interface{})
func RegisterName(name string, value interface{})
type CommonType struct { ... }
type Decoder struct { ... }
    func NewDecoder(r io.Reader) *Decoder
type Encoder struct { ... }
    func NewEncoder(w io.Writer) *Encoder
type GobDecoder interface { ... }
type GobEncoder interface { ... }

Change-Id: I021db25bce4a16b3dfa22ab323ca1f4e68d50111
Reviewed-on: https://go-review.googlesource.com/22354Reviewed-by: Robert Griesemer <gri@golang.org>

The cached copy's ID is sometimes outside the bounds of the orig array.

There's no reason to start at the cached copy and work backwards
to the original value. We already have the original value ID at
all the callsites.

Fixes noopt build

Change-Id: I313508a1917e838a87e8cc83b2ef3c2e4a8db304
Reviewed-on: https://go-review.googlesource.com/22355
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Instead of using TARRAY for both arrays and slices, create a new
TSLICE kind to handle slices.

Also, get rid of the "DDDArray" distinction. While kinda ugly, it
seems likely we'll need to defer evaluating the constant bounds
expressions for golang.org/issue/13890.

Passes toolstash/buildall.

Change-Id: I8e45d4900e7df3a04cce59428ec8b38035d3cc3a
Reviewed-on: https://go-review.googlesource.com/22329Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

- adjusted example code
- fixed comments

Fixes #14785.

Change-Id: Ia757dc93b0a69b8408559885ece7f3685a37daaa
Reviewed-on: https://go-review.googlesource.com/22353Reviewed-by: Rob Pike <r@golang.org>