Change-Id: I546e8b1aa4facdbf13bb80d386bf4839a3aff9d1
Reviewed-on: https://go-review.googlesource.com/31314
Run-TryBot: Chris Broadfoot <cbro@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>

Change-Id: I34b3650ee9512879ff7528336813a7850c46ea90
Reviewed-on: https://go-review.googlesource.com/31311Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/31313Reviewed-by: Chris Broadfoot <cbro@golang.org>

Adds a test to check that block cipher modes accept a zero-length
input.

Fixes #17435.

Change-Id: Ie093c4cdff756b5c2dcb79342e167b3de5622389
Reviewed-on: https://go-review.googlesource.com/31070
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/31291Reviewed-by: Michael Munday <munday@ca.ibm.com>
Run-TryBot: Chris Broadfoot <cbro@golang.org>

In some cases the members of the root set from which flood
runs themselves escape, without their referents being also
tagged as escaping.  Fix this by reflooding from those roots
whose escape increases, and also enhance the "leak" test to
include reachability from a heap-escaped root.

Fixes #17318.

Change-Id: Ied1e75cee17ede8ca72a8b9302ce8201641ec593
Reviewed-on: https://go-review.googlesource.com/30693
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-on: https://go-review.googlesource.com/31290Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Chase <drchase@google.com>

In FreeBSD 10.0, the _umtx_op syscall was changed to allow sleeping on
any supported clock, but the default clock was switched from a monotonic
clock to CLOCK_REALTIME.

Prior to 10.0, the __umtx_op_wait* functions ignored the fourth argument
to _umtx_op (uaddr1), expected the fifth argument (uaddr2) to be a
struct timespec pointer, and used a monotonic clock (nanouptime(9)) for
timeout calculations.

Since 10.0, if callers want a clock other than CLOCK_REALTIME, they must
call _umtx_op with uaddr1 set to a value greater than sizeof(struct
timespec), and with uaddr2 as pointer to a struct _umtx_time, rather
than a timespec. Callers can set the _clockid field of the struct
_umtx_time to request the clock they want.

The relevant FreeBSD commit:
    https://svnweb.freebsd.org/base?view=revision&revision=232144

Fixes #17168

Change-Id: I3dd7b32b683622b8d7b4a6a8f9eb56401bed6bdf
Reviewed-on: https://go-review.googlesource.com/30154Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-on: https://go-review.googlesource.com/31269

After renegotiation support was added (af125a51) it's possible for a
Write to block on a Read when racing to complete the handshake:
   1. The Write determines that a handshake is needed and tries to
      take the neccesary locks in the correct order.
   2. The Read also determines that a handshake is needed and wins
      the race to take the locks.
   3. The Read goroutine completes the handshake and wins a race
      to unlock and relock c.in, which it'll hold when waiting for
      more network data.

If the application-level protocol requires the Write to complete before
data can be read then the system as a whole will deadlock.

Unfortunately it doesn't appear possible to reverse the locking order of
c.in and handshakeMutex because we might read a renegotiation request at
any point and need to be able to do a handshake without unlocking.

So this change adds a sync.Cond that indicates that a goroutine has
committed to doing a handshake. Other interested goroutines can wait on
that Cond when needed.

The test for this isn't great. I was able to reproduce the deadlock with
it only when building with -race. (Because -race happened to alter the
timing just enough.)

Fixes #17101.

Change-Id: I4e8757f7b82a84e46c9963a977d089f0fb675495
Reviewed-on: https://go-review.googlesource.com/29164Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-on: https://go-review.googlesource.com/31268

STFLE does not necessarily write to all the double-words that are
requested. It is therefore necessary to clear the target memory
before calling STFLE in order to ensure that the facility list does
not contain false positives.

Fixes #17032.

Change-Id: I7bec9ade7103e747b72f08562fe57e6f091bd89f
Reviewed-on: https://go-review.googlesource.com/28850Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/31267Reviewed-by: Michael Munday <munday@ca.ibm.com>

Updates bundled http2 for x/net/http2 git rev 8d4d01f0 for:

[release-branch.go1.7] http2: don't sniff first Request.Body byte in Transport until we have a conn
https://golang.org/cl/29074

Fixes #17071

Change-Id: I37fef5c2c0fdf499545f9af08abd5f9edb2da4c0
Reviewed-on: https://go-review.googlesource.com/29111
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>

Change-Id: I003795d8dc2176532ee133740bf35e23a3aa3878
Reviewed-on: https://go-review.googlesource.com/28811Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/28774Reviewed-by: Chris Broadfoot <cbro@golang.org>

Change-Id: Id877244fba01ae84255ad2d1f6334d096d5d6f71
Reviewed-on: https://go-review.googlesource.com/28694Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Change-Id: I6bdbf0cafa0f70bdb7c435e45885f5d8f9e05dad
Reviewed-on: https://go-review.googlesource.com/28693Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/28692

The previous fix for this, commit 336dad2a, had everything right in
the commit message, but reversed the test in the code. Fix the test in
the code.

This reversal effectively disabled the scavenger on large page systems
*except* in the rare cases where this code was originally wrong, which
is why it didn't obviously show up in testing.

Fixes #16644. Again. :(

Change-Id: I27cce4aea13de217197db4b628f17860f27ce83e
Reviewed-on: https://go-review.googlesource.com/27402
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/28631
Run-TryBot: Chris Broadfoot <cbro@golang.org>

This CL is a manual backpatch of CL 27320 into the 1.7.1 release branch.

The manual backpatch is required because OpZero changed from having a
size as its AuxInt to having a size+align as its AuxInt (that was to support
the ARM SSA backend).  Otherwise the CLs should be identical.

Please review carefully!

Change-Id: I569b759c06d1971c9c62dc5dd589abc7ef7c844a
Reviewed-on: https://go-review.googlesource.com/28670Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes test failure when VMWare's shared folder filesystem is present.

MNT_NOWAIT is what the mount(8) command does.

Fixes #16937

Change-Id: Id436185f544b7069db46c8716d6a0bf580b31da0
Reviewed-on: https://go-review.googlesource.com/28550
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-on: https://go-review.googlesource.com/28650
Run-TryBot: Chris Broadfoot <cbro@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Go 1.7 crashed after Transport.IdleConnTimeout if an HTTP/2 connection
was established but but its caller no longer wanted it. (Assuming the
connection cache was enabled, which it is by default)

Fixes #16208

Change-Id: I9628757f7669e344f416927c77f00ed3864839e3
Reviewed-on: https://go-review.googlesource.com/27450Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-on: https://go-review.googlesource.com/28637Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The old deprecation docs were referencing another deprecated field.

Fixes #16752

Change-Id: I44a690048e00ddc790a80214ecb7f5bb0a5b7b34
Reviewed-on: https://go-review.googlesource.com/27510Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-on: https://go-review.googlesource.com/28638Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Current code assumes there are not ".." in the Clean(path).
That's not true. Clean doesn't handle leading "..", so we need to stop
normalization if we see "..".

Fixes #16793

Change-Id: I0a7901bedac17f1210b134d593ebd9f5e8483775
Reviewed-on: https://go-review.googlesource.com/27410Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-on: https://go-review.googlesource.com/28641Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The handling of "options timeout:n" is supposed to be per individual
DNS server exchange, not per Lookup call.

Fixes #16865.

Change-Id: I2304579b9169c1515292f142cb372af9d37ff7c1
Reviewed-on: https://go-review.googlesource.com/28057
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/28640

Recreated original favicon with svg. Note, the rasterizations are hand
tweaked for crispness and straight export will not give the same results.

Fixes #6938

Change-Id: I9bf7b59028711361c29365b145932d90af419b69
Reviewed-on: https://go-review.googlesource.com/26850Reviewed-by: Chris Broadfoot <cbro@golang.org>
Reviewed-on: https://go-review.googlesource.com/28639Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

.local addresses are used by things like Kubernetes and Weave DNS; Go
should not avoid resolving them.

This is a partial revert of https://golang.org/cl/21328 which was too
strict of an interpretation of RFC 6762.

Fixes #16739

Change-Id: I349415b4eab5d61240dd18217bd95dc7d2105cd5
Reviewed-on: https://go-review.googlesource.com/27250Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-on: https://go-review.googlesource.com/28632

Fixes #16722

Change-Id: I50a0e69d3e79d13bc1860cd983267c3db087a4b8
Reviewed-on: https://go-review.googlesource.com/27119Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-on: https://go-review.googlesource.com/28630

The code wasn't checking to see if the data was still >= 64 bytes
long after aligning it.

Aligning the data is an optimization and we don't actually need
to do it. In fact for smaller sizes it slows things down due to
the overhead of calling the generic function. Therefore for now
I have simply removed the alignment stage. I have also added a
check into the assembly to deliberately trigger a segmentation
fault if the data is too short.

Fixes #16779.

Change-Id: Ic01636d775efc5ec97689f050991cee04ce8fe73
Reviewed-on: https://go-review.googlesource.com/27409Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/28635

If an io.Reader returned (non-zero, EOF), MultiReader would yield
bytes forever.

This bug has existed before Go 1 (!!), introduced in the original
MultiReader implementation in https://golang.org/cl/1764043 and also
survived basically the only update to this code since then
(https://golang.org/cl/17873, git rev ccdca832), which was added in
Go 1.7.

This just bit me when writing a test for some unrelated code.

Fixes #16795

Change-Id: I36e6a701269793935d19a47ac12f67b07179fbff
Reviewed-on: https://go-review.googlesource.com/27397
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-on: https://go-review.googlesource.com/28633Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

For persistent error handling, the methods of huffmanBitWriter have to be
consistent about how they check errors. It must either consistently
check error *before* every operation OR immediately *after* every
operation. Since most of the current logic uses the previous approach,
we apply the same style of error checking to writeBits and all calls
to Write such that they only operate if w.err is already nil going
into them.

The error handling approach is brittle and easily broken by future commits to
the code. In the near future, we should switch the logic to use panic at the
lowest levels and a recover at the edge of the public API to ensure
that errors are always persistent.

Fixes #16749

Change-Id: Ie1d83e4ed8842f6911a31e23311cd3cbf38abe8c
Reviewed-on: https://go-review.googlesource.com/27200Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/28634Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>

Updates bundled http2 to x/net/http2 git rev 7394c11 for:

http2: fix protocol violation regression when writing certain request bodies
https://golang.org/cl/27406

Fixes #16788

Change-Id: I0efcd36e2b4b34a1df79f763d35bf7a3a1858506
Reviewed-on: https://go-review.googlesource.com/27451
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-on: https://go-review.googlesource.com/28636Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Updates #16737

Change-Id: Ia51fc9b06df43b7c6f7136e90b40362263c20081
Reviewed-on: https://go-review.googlesource.com/27126Reviewed-by: Chris Broadfoot <cbro@golang.org>
Reviewed-on: https://go-review.googlesource.com/27234

Change-Id: Ib17f6643efd49e2bca188c4faa505f79832d18b1
Reviewed-on: https://go-review.googlesource.com/27110Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/27112Reviewed-by: Chris Broadfoot <cbro@golang.org>

Change-Id: Id86f2615772ce087c2ac1a9039ffc27c33298773
Reviewed-on: https://go-review.googlesource.com/27075
Run-TryBot: Chris Broadfoot <cbro@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: Ieae5831b35768a625bf735a38f3d938f23f0b77b
Reviewed-on: https://go-review.googlesource.com/27057Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/27070Reviewed-by: Chris Broadfoot <cbro@golang.org>

Change-Id: Id83e0371b7232b01be83640ef1e47f9026cf2a23
Reviewed-on: https://go-review.googlesource.com/27055Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/27056Reviewed-by: Chris Broadfoot <cbro@golang.org>

Fixes #15820.

Change-Id: Ia5d5237754e77774a3a6049765eea163911f41c9
Reviewed-on: https://go-review.googlesource.com/25592Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/27054Reviewed-by: Chris Broadfoot <cbro@golang.org>

Change-Id: Ie76b5af0ecc4c64c523110b44483c06e7031237c
Reviewed-on: https://go-review.googlesource.com/25582Reviewed-by: Chris Broadfoot <cbro@golang.org>

7a622740 net/http: make Transport use new connection if over HTTP/2 concurrency limit
219ca602 doc: fix required OS X version inconsistency for binary downloads
26015b95 runtime: make stack 16-byte aligned for external code in _rt0_amd64_linux_lib
9fde86b0 runtime, syscall: fix kernel gettimeofday ABI change on iOS 10
3a03e877 os: check for waitid returning ENOSYS
10316757 net/http: update bundled http2 for flow control window adjustment fix
da070bed syscall: fix Gettimeofday on macOS Sierra
f135c326 runtime: initialize hash algs before typemap

Change-Id: Ie176f3db1e253d75ae8e56b16d3fd9900b37dde3

The Go HTTP/1 client will make as many new TCP connections as the user requests.

The HTTP/2 client tried to have that behavior, but the policy of
whether a connection is re-usable didn't take into account the extra 1
stream counting against SETTINGS_MAX_CONCURRENT_STREAMS so in practice
users were getting errors.

For example, if the server's advertised max concurrent streams is 100
and 200 concurrrent Go HTTP requests ask for a connection at once, all
200 will think they can reuse that TCP connection, but then 100 will
fail later when the number of concurrent streams exceeds 100.

Instead, recognize the "no cached connections" error value in the
shouldRetryRequest method, so those 100 will retry a new connection.

This is the conservative fix for Go 1.7 so users don't get errors, and
to match the HTTP/1 behavior. Issues #13957 and #13774 are the more
involved bugs for Go 1.8.

Updates #16582
Updates #13957

Change-Id: I1f15a7ce60c07a4baebca87675836d6fe03993e8
Reviewed-on: https://go-review.googlesource.com/25580
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>

Updates #16625

Change-Id: Icac6705828bd9b29379596ba64b34d922b9002c3
Reviewed-on: https://go-review.googlesource.com/25548Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes #16618.

Change-Id: Iffada12e8672bbdbcf2e787782c497e2c45701b1
Reviewed-on: https://go-review.googlesource.com/25550
Run-TryBot: Minux Ma <minux@golang.org>
Reviewed-by: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #16570 on iOS.

Thanks Daniel Burhans for reporting the bug and testing the fix.

Change-Id: I43ae7b78c8f85a131ed3d93ea59da9f32a02cd8f
Reviewed-on: https://go-review.googlesource.com/25481Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Reportedly waitid is not available for Ubuntu on Windows.

Fixes #16610.

Change-Id: Ia724f45a85c6d3467b847da06d8c65d280781dcd
Reviewed-on: https://go-review.googlesource.com/25507
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Updates bundled http2 to x/net/http2 git rev 075e191 for:

   http2: adjust flow control on open streams when processing SETTINGS
   https://golang.org/cl/25508

Fixes #16612

Change-Id: Ib0513201bff44ab747a574ae6894479325c105d2
Reviewed-on: https://go-review.googlesource.com/25543
Run-TryBot: Chris Broadfoot <cbro@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #16606

Change-Id: I57465061b90e901293cd8b6ef756d6aa84ebd4a3
Reviewed-on: https://go-review.googlesource.com/25495Reviewed-by: Quentin Smith <quentin@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>