- 30 Aug, 2018 24 commits
-
-
Kevin Burke authored
"someting" is misspelled and the error handling both clobbers the error that occurs and distracts from the point of the example, which is to demonstrate how Printf works. It's better to just panic with the error. Change-Id: I5fb0a4a1a8b4772cbe0302582fa878d95e3a4060 Reviewed-on: https://go-review.googlesource.com/132376Reviewed-by:
Daniel Martí <mvdan@mvdan.cc> Run-TryBot: Daniel Martí <mvdan@mvdan.cc> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Agniva De Sarker authored
Instead of calling run synchronously, we pass it through bgrun and immediately wait for it to finish. This pushes all jobs to execute through the bgwork channel and therefore causes them to exit cleanly in case of a compiler error. Fixes #25981 Change-Id: I789a85d23fabf32d144ab85a3c9f53546cb7765a Reviewed-on: https://go-review.googlesource.com/127776 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Ian Lance Taylor <iant@golang.org>
-
Rebecca Stambler authored
The type-checker currently crashes when checking code such as: _ = map[string][...]int{"": {1, 2, 3}} In this case, the type checker reports an error for map[string][...]int, then proceeds to type-check the values of the map literal using a hint type of [...]int. When type-checking the inner composite (array) literal, the length of the open array type is computed from the elements, then the array type is recorded, but the literal has no explicit type syntax against which to record the type, so this code causes the type-checker to panic. Add a nil check before calling check.recordTypeAndValue to avoid that. Updates #22467 Change-Id: Ic4453ba485b7b88ede2a89f209365eda9e032abc Reviewed-on: https://go-review.googlesource.com/132355Reviewed-by:Alan Donovan <adonovan@google.com>
-
Andrei Tudor Călin authored
Refactor TestSplice/readerAtEOF to handle cases where we disable splice on older kernels better. If splice is disabled, net.splice and poll.Splice do not get to observe EOF on the reader, because poll.Splice returns immediately with EINVAL. The test fails unexpectedly, because the splice operation is reported as not handled. This change refactors the test to handle the aforementioned case correctly, by not calling net.splice directly, but using a higher level check. Fixes #27355. Change-Id: I0d5606b4775213f2dbbb84ef82ddfc3bab662a31 Reviewed-on: https://go-review.googlesource.com/132096 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Dylan Waits authored
Change-Id: Idc4aa53e443b89eeba496d00f6b409268e29ec21 Reviewed-on: https://go-review.googlesource.com/132241 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Brad Fitzpatrick <bradfitz@golang.org>
-
ianzapolsky authored
The errors package has an example for Errorf, but the fmt package does not. Copy the Errorf example from errors to fmt. Move existing Stringer example into separate file, so as not to break the assumption that the entire file will be presented as the example. Change-Id: I8a210a69362017fa08615a8c3feccdeee8427e22 Reviewed-on: https://go-review.googlesource.com/132239Reviewed-by:
-
Venil Noronha authored
Change-Id: I8e55e9397eb6844b5856f8bde9c26185c446a80e Reviewed-on: https://go-review.googlesource.com/132238Reviewed-by:
-
Dmitry Neverov authored
Change-Id: I7ba55e3f6ebbaae41188316a66a40f994c037ad9 Reviewed-on: https://go-review.googlesource.com/132240 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Erin Masatsugu authored
Change-Id: Ide50aba940727a7b32cd33dea5315050f1a34717 Reviewed-on: https://go-review.googlesource.com/132237 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
David Timm authored
Change-Id: Id0e2fb2abad5b776ac0ed76e55e36c6b774b5b7a Reviewed-on: https://go-review.googlesource.com/132278 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Venil Noronha authored
Signed-off-by:
Venil Noronha <veniln@vmware.com> Change-Id: Ie5f50bc31db1eee11582b70b0e25c726090d4037 Reviewed-on: https://go-review.googlesource.com/132236 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
G. Hussain Chinoy authored
Change-Id: I65c3bda498562fdf39994ec1cadce7947e2d84b5 Reviewed-on: https://go-review.googlesource.com/132277 Run-TryBot: Bryan C. Mills <bcmills@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Bryan C. Mills <bcmills@google.com>
-
Cherry Zhang authored
runtime.wbBufFlush must not modify its arguments, because the argument slots are also used as spill slots in runtime.gcWriteBarrier. So, GOEXPERIMENT=clobberdead must not clobber them. Updates #27326. Change-Id: Id02bb22a45201eecee748d89e7bdb3df7e4940e4 Reviewed-on: https://go-review.googlesource.com/131957Reviewed-by:
Keith Randall <khr@golang.org>
-
Cherry Zhang authored
We now have safepoints at nearly all the instructions. When GOEXPERIMENT=clobberdead is on, it inserts clobbers nearly at every instruction. Currently this doesn't work. (Maybe the stack maps at non-call safepoints are still imprecise. I haven't investigated.) For now, only use call-based safepoints if the experiment is on. Updates #27326. Change-Id: I72cda9b422d9637cc5738e681502035af7a5c02d Reviewed-on: https://go-review.googlesource.com/131956Reviewed-by:
-
Rebecca Stambler authored
The current implementation crashes when someone writes a panic outside of a function, which makes sense since that is broken code. This fix allows one to type-check broken code. Updates #22467 Change-Id: I81b90dbd918162a20c60a821340898eaf02e648d Reviewed-on: https://go-review.googlesource.com/132235Reviewed-by:
-
Alex Kohler authored
Change-Id: Icded6c786b7b185d5aff055f34e0cfe9e521826a Reviewed-on: https://go-review.googlesource.com/132176 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Than McIntosh authored
The sym.Symbol 'ElfType' field is used only for symbols corresponding to things in imported shared libraries, hence is not needed in the common case. Relocate it to sym.AuxSymbol so as to shrink the main Symbol struct. Updates #26186 Change-Id: I803efc561c31a0ca1d93eca434fda1c862a7b2c5 Reviewed-on: https://go-review.googlesource.com/125479Reviewed-by:
-
Than McIntosh authored
The sym.Symbol 'Plt' and 'Got' field are used only with cgo and/or external linking and are not needed for most symbols. Relocate them to sym.AuxSymbol so as to shrink the main Symbol struct. Updates #26186 Change-Id: I170d628a760be300a0c1f738f0998970e91ce3d6 Reviewed-on: https://go-review.googlesource.com/125478Reviewed-by:
-
Than McIntosh authored
The sym.Symbol 'Localentry' field is used only with cgo and/or external linking on MachoPPC. Relocate it to sym.AuxSymbol since it is infrequently used, so as to shrink the main Symbol struct. Updates #26186 Change-Id: I5872aa3f059270c2a091016d235a1a732695e411 Reviewed-on: https://go-review.googlesource.com/125477Reviewed-by:
-
Than McIntosh authored
Create a new "AuxSymbol" struct into which 'cold' or 'infrequently set' symbol fields are located. Move the Extname field from the main Symbol struct to AuxSymbol. Updates #26186 Change-Id: I9e795fb0cc48f978e2818475fa073ed9f2db202d Reviewed-on: https://go-review.googlesource.com/125476Reviewed-by:
-
Cherry Zhang authored
The 120->124 change in https://go-review.googlesource.com/c/go/+/61511/21/test/nosplit.go#143 looks accidental. Change back to 120. Change-Id: I1690a8ae2d32756ba05544d2ed1baabfa64e1704 Reviewed-on: https://go-review.googlesource.com/131958 Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Ben Shi authored
The system call geteuid can not work properly on android, which causes a test case failed on rooted android/arm. This CL disables the test case on android. Fixes #27364 Change-Id: Ibfd33ef8cc1dfe8822c8be4280eae12ee30929c1 Reviewed-on: https://go-review.googlesource.com/132175 Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Tobias Klauser <tobias.klauser@gmail.com>
-
Joe Cortopassi authored
Fixes issue #27359 Change-Id: I048fbd88a08e8b17fcda3872ee4c78935d5075d8 GitHub-Last-Rev: a0751eca094d68e9bf005abeb6616eb5b0050190 GitHub-Pull-Request: golang/go#27359 Reviewed-on: https://go-review.googlesource.com/132117Reviewed-by:
-
Cherry Zhang authored
Nil check is special in that it has no use but we must keep it. Count it as a use of the auto. Fixes #27278. Change-Id: I857c3d0db2ebdca1bc342b4993c0dac5c01e067f Reviewed-on: https://go-review.googlesource.com/131955 Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
- 29 Aug, 2018 6 commits
-
-
Alexey Alexandrov authored
Fixes #26638. Change-Id: I3c18d1298d99af8ea8c00916303efd2b5a5effc7 Reviewed-on: https://go-review.googlesource.com/126336Reviewed-by:
Hyang-Ah Hana Kim <hyangah@gmail.com> Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Alberto Donizetti authored
bytes.NewBuffer's documentation says it can be used to set the initial size of the buffer. The current wording is: > It can also be used to size the internal buffer for writing. This may led users to believe that the buffer (its backing array) is fixed in size and won't grow, which isn't true (subsequent Write calls will expand the backing array as needed). Change the doc to make it clearer that NewBuffer just sets the initial size of the buffer. Fixes #27242 Change-Id: I2a8cb5bee02ca2c1657ef59e2cf1434c7a9bd397 Reviewed-on: https://go-review.googlesource.com/132035Reviewed-by:
Dominik Honnef <dominik@honnef.co> Reviewed-by:
-
Daniel Martí authored
lexRawQuote already uses the next method, which keeps track of newlines on a character by character basis. Adding up newlines in emit again results in the newlines being counted twice, which can mean bad position information in error messages. Fix that, and add a test. Fixes #27319. Change-Id: Id803be065c541412dc808d388bc6d8a86a0de41e Reviewed-on: https://go-review.googlesource.com/131996 Run-TryBot: Daniel Martí <mvdan@mvdan.cc> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Zheng Xu authored
Supporting frame-pointer makes Linux's perf and other profilers much more useful because it lets them gather a stack trace efficiently on profiling events. Major changes include: 1. save FP on the word below where RSP is pointing to (proposed by Cherry and Austin) 2. adjust some specific offsets in runtime assembly and wrapper code 3. add support to FP in goroutine scheduler 4. adjust link stack overflow check to take the extra word into account 5. adjust nosplit test cases to enable frame sizes which are 16 bytes aligned Performance impacts on go1 benchmarks: Enable frame-pointer (by default) name old time/op new time/op delta BinaryTree17-46 5.94s ± 0% 6.00s ± 0% +1.03% (p=0.029 n=4+4) Fannkuch11-46 2.84s ± 1% 2.77s ± 0% -2.58% (p=0.008 n=5+5) FmtFprintfEmpty-46 55.0ns ± 1% 58.9ns ± 1% +7.06% (p=0.008 n=5+5) FmtFprintfString-46 102ns ± 0% 105ns ± 0% +2.94% (p=0.008 n=5+5) FmtFprintfInt-46 118ns ± 0% 117ns ± 1% -1.19% (p=0.000 n=4+5) FmtFprintfIntInt-46 181ns ± 0% 182ns ± 1% ~ (p=0.444 n=5+5) FmtFprintfPrefixedInt-46 215ns ± 1% 214ns ± 0% ~ (p=0.254 n=5+4) FmtFprintfFloat-46 292ns ± 0% 296ns ± 0% +1.46% (p=0.029 n=4+4) FmtManyArgs-46 720ns ± 0% 732ns ± 0% +1.72% (p=0.008 n=5+5) GobDecode-46 9.82ms ± 1% 10.03ms ± 2% +2.10% (p=0.008 n=5+5) GobEncode-46 8.14ms ± 0% 8.72ms ± 1% +7.14% (p=0.008 n=5+5) Gzip-46 420ms ± 0% 424ms ± 0% +0.92% (p=0.008 n=5+5) Gunzip-46 48.2ms ± 0% 48.4ms ± 0% +0.41% (p=0.008 n=5+5) HTTPClientServer-46 201µs ± 4% 201µs ± 0% ~ (p=0.730 n=5+4) JSONEncode-46 17.1ms ± 0% 17.7ms ± 1% +3.80% (p=0.008 n=5+5) JSONDecode-46 88.0ms ± 0% 90.1ms ± 0% +2.42% (p=0.008 n=5+5) Mandelbrot200-46 5.06ms ± 0% 5.07ms ± 0% ~ (p=0.310 n=5+5) GoParse-46 5.04ms ± 0% 5.12ms ± 0% +1.53% (p=0.008 n=5+5) RegexpMatchEasy0_32-46 117ns ± 0% 117ns ± 0% ~ (all equal) RegexpMatchEasy0_1K-46 332ns ± 0% 329ns ± 0% -0.78% (p=0.008 n=5+5) RegexpMatchEasy1_32-46 104ns ± 0% 113ns ± 0% +8.65% (p=0.029 n=4+4) RegexpMatchEasy1_1K-46 563ns ± 0% 569ns ± 0% +1.10% (p=0.008 n=5+5) RegexpMatchMedium_32-46 167ns ± 2% 177ns ± 1% +5.74% (p=0.008 n=5+5) RegexpMatchMedium_1K-46 49.5µs ± 0% 53.4µs ± 0% +7.81% (p=0.008 n=5+5) RegexpMatchHard_32-46 2.56µs ± 1% 2.72µs ± 0% +6.01% (p=0.008 n=5+5) RegexpMatchHard_1K-46 77.0µs ± 0% 81.8µs ± 0% +6.24% (p=0.016 n=5+4) Revcomp-46 631ms ± 1% 627ms ± 1% ~ (p=0.095 n=5+5) Template-46 81.8ms ± 0% 86.3ms ± 0% +5.55% (p=0.008 n=5+5) TimeParse-46 423ns ± 0% 432ns ± 0% +2.32% (p=0.008 n=5+5) TimeFormat-46 478ns ± 2% 497ns ± 1% +3.89% (p=0.008 n=5+5) [Geo mean] 71.6µs 73.3µs +2.45% name old speed new speed delta GobDecode-46 78.1MB/s ± 1% 76.6MB/s ± 2% -2.04% (p=0.008 n=5+5) GobEncode-46 94.3MB/s ± 0% 88.0MB/s ± 1% -6.67% (p=0.008 n=5+5) Gzip-46 46.2MB/s ± 0% 45.8MB/s ± 0% -0.91% (p=0.008 n=5+5) Gunzip-46 403MB/s ± 0% 401MB/s ± 0% -0.41% (p=0.008 n=5+5) JSONEncode-46 114MB/s ± 0% 109MB/s ± 1% -3.66% (p=0.008 n=5+5) JSONDecode-46 22.0MB/s ± 0% 21.5MB/s ± 0% -2.35% (p=0.008 n=5+5) GoParse-46 11.5MB/s ± 0% 11.3MB/s ± 0% -1.51% (p=0.008 n=5+5) RegexpMatchEasy0_32-46 272MB/s ± 0% 272MB/s ± 1% ~ (p=0.190 n=4+5) RegexpMatchEasy0_1K-46 3.08GB/s ± 0% 3.11GB/s ± 0% +0.77% (p=0.008 n=5+5) RegexpMatchEasy1_32-46 306MB/s ± 0% 283MB/s ± 0% -7.63% (p=0.029 n=4+4) RegexpMatchEasy1_1K-46 1.82GB/s ± 0% 1.80GB/s ± 0% -1.07% (p=0.008 n=5+5) RegexpMatchMedium_32-46 5.99MB/s ± 0% 5.64MB/s ± 1% -5.77% (p=0.016 n=4+5) RegexpMatchMedium_1K-46 20.7MB/s ± 0% 19.2MB/s ± 0% -7.25% (p=0.008 n=5+5) RegexpMatchHard_32-46 12.5MB/s ± 1% 11.8MB/s ± 0% -5.66% (p=0.008 n=5+5) RegexpMatchHard_1K-46 13.3MB/s ± 0% 12.5MB/s ± 1% -6.01% (p=0.008 n=5+5) Revcomp-46 402MB/s ± 1% 405MB/s ± 1% ~ (p=0.095 n=5+5) Template-46 23.7MB/s ± 0% 22.5MB/s ± 0% -5.25% (p=0.008 n=5+5) [Geo mean] 82.2MB/s 79.6MB/s -3.26% Disable frame-pointer (GOEXPERIMENT=noframepointer) name old time/op new time/op delta BinaryTree17-46 5.94s ± 0% 5.96s ± 0% +0.39% (p=0.029 n=4+4) Fannkuch11-46 2.84s ± 1% 2.79s ± 1% -1.68% (p=0.008 n=5+5) FmtFprintfEmpty-46 55.0ns ± 1% 55.2ns ± 3% ~ (p=0.794 n=5+5) FmtFprintfString-46 102ns ± 0% 103ns ± 0% +0.98% (p=0.016 n=5+4) FmtFprintfInt-46 118ns ± 0% 115ns ± 0% -2.54% (p=0.029 n=4+4) FmtFprintfIntInt-46 181ns ± 0% 179ns ± 0% -1.10% (p=0.000 n=5+4) FmtFprintfPrefixedInt-46 215ns ± 1% 213ns ± 0% ~ (p=0.143 n=5+4) FmtFprintfFloat-46 292ns ± 0% 300ns ± 0% +2.83% (p=0.029 n=4+4) FmtManyArgs-46 720ns ± 0% 739ns ± 0% +2.64% (p=0.008 n=5+5) GobDecode-46 9.82ms ± 1% 9.78ms ± 1% ~ (p=0.151 n=5+5) GobEncode-46 8.14ms ± 0% 8.12ms ± 1% ~ (p=0.690 n=5+5) Gzip-46 420ms ± 0% 420ms ± 0% ~ (p=0.548 n=5+5) Gunzip-46 48.2ms ± 0% 48.0ms ± 0% -0.33% (p=0.032 n=5+5) HTTPClientServer-46 201µs ± 4% 199µs ± 3% ~ (p=0.548 n=5+5) JSONEncode-46 17.1ms ± 0% 17.2ms ± 0% ~ (p=0.056 n=5+5) JSONDecode-46 88.0ms ± 0% 88.6ms ± 0% +0.64% (p=0.008 n=5+5) Mandelbrot200-46 5.06ms ± 0% 5.07ms ± 0% ~ (p=0.548 n=5+5) GoParse-46 5.04ms ± 0% 5.07ms ± 0% +0.65% (p=0.008 n=5+5) RegexpMatchEasy0_32-46 117ns ± 0% 112ns ± 4% -4.27% (p=0.016 n=4+5) RegexpMatchEasy0_1K-46 332ns ± 0% 330ns ± 1% ~ (p=0.095 n=5+5) RegexpMatchEasy1_32-46 104ns ± 0% 110ns ± 1% +5.29% (p=0.029 n=4+4) RegexpMatchEasy1_1K-46 563ns ± 0% 567ns ± 2% ~ (p=0.151 n=5+5) RegexpMatchMedium_32-46 167ns ± 2% 166ns ± 0% ~ (p=0.333 n=5+4) RegexpMatchMedium_1K-46 49.5µs ± 0% 49.6µs ± 0% ~ (p=0.841 n=5+5) RegexpMatchHard_32-46 2.56µs ± 1% 2.49µs ± 0% -2.81% (p=0.008 n=5+5) RegexpMatchHard_1K-46 77.0µs ± 0% 75.8µs ± 0% -1.55% (p=0.008 n=5+5) Revcomp-46 631ms ± 1% 628ms ± 0% ~ (p=0.095 n=5+5) Template-46 81.8ms ± 0% 84.3ms ± 1% +3.05% (p=0.008 n=5+5) TimeParse-46 423ns ± 0% 425ns ± 0% +0.52% (p=0.008 n=5+5) TimeFormat-46 478ns ± 2% 478ns ± 1% ~ (p=1.000 n=5+5) [Geo mean] 71.6µs 71.6µs -0.01% name old speed new speed delta GobDecode-46 78.1MB/s ± 1% 78.5MB/s ± 1% ~ (p=0.151 n=5+5) GobEncode-46 94.3MB/s ± 0% 94.5MB/s ± 1% ~ (p=0.690 n=5+5) Gzip-46 46.2MB/s ± 0% 46.2MB/s ± 0% ~ (p=0.571 n=5+5) Gunzip-46 403MB/s ± 0% 404MB/s ± 0% +0.33% (p=0.032 n=5+5) JSONEncode-46 114MB/s ± 0% 113MB/s ± 0% ~ (p=0.056 n=5+5) JSONDecode-46 22.0MB/s ± 0% 21.9MB/s ± 0% -0.64% (p=0.008 n=5+5) GoParse-46 11.5MB/s ± 0% 11.4MB/s ± 0% -0.64% (p=0.008 n=5+5) RegexpMatchEasy0_32-46 272MB/s ± 0% 285MB/s ± 4% +4.74% (p=0.016 n=4+5) RegexpMatchEasy0_1K-46 3.08GB/s ± 0% 3.10GB/s ± 1% ~ (p=0.151 n=5+5) RegexpMatchEasy1_32-46 306MB/s ± 0% 290MB/s ± 1% -5.21% (p=0.029 n=4+4) RegexpMatchEasy1_1K-46 1.82GB/s ± 0% 1.81GB/s ± 2% ~ (p=0.151 n=5+5) RegexpMatchMedium_32-46 5.99MB/s ± 0% 6.02MB/s ± 1% ~ (p=0.063 n=4+5) RegexpMatchMedium_1K-46 20.7MB/s ± 0% 20.7MB/s ± 0% ~ (p=0.659 n=5+5) RegexpMatchHard_32-46 12.5MB/s ± 1% 12.8MB/s ± 0% +2.88% (p=0.008 n=5+5) RegexpMatchHard_1K-46 13.3MB/s ± 0% 13.5MB/s ± 0% +1.58% (p=0.008 n=5+5) Revcomp-46 402MB/s ± 1% 405MB/s ± 0% ~ (p=0.095 n=5+5) Template-46 23.7MB/s ± 0% 23.0MB/s ± 1% -2.95% (p=0.008 n=5+5) [Geo mean] 82.2MB/s 82.3MB/s +0.04% Frame-pointer is enabled on Linux by default but can be disabled by setting: GOEXPERIMENT=noframepointer. Fixes #10110 Change-Id: I1bfaca6dba29a63009d7c6ab04ed7a1413d9479e Reviewed-on: https://go-review.googlesource.com/61511Reviewed-by:
Cherry Zhang <cherryyz@google.com> Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Than McIntosh authored
When generation DWARF inline info records, the current implementation includes a sorting pass that reorders a subprogram's child variable DIEs based on class (param/auto) and name. This sorting is no longer needed, and can cause problems for a debugger (if we want to use the DWARF info for creating a call to an optimized function); this patch removes it. Ordering of DWARF subprogram variable/parameter DIEs is still deterministic with this change, since it is keyed off the order in which vars appear in the pre-inlining function "Dcl" list. Updates #27039 Change-Id: I3b91290d11bb3b9b36fb61271d80b801841401ee Reviewed-on: https://go-review.googlesource.com/131895Reviewed-by:
Heschi Kreinick <heschi@google.com>
-
Ben Shi authored
Lookup is not supported on android, and the test syscall/exec_linux_test.go which relies on it will fail on android/arm64. Fixes #27327 Change-Id: I6fdb8992d4634ac7e3689360ff114e9431b5e90c Reviewed-on: https://go-review.googlesource.com/131995Reviewed-by:
-
- 28 Aug, 2018 10 commits
-
-
Alessandro Arzilli authored
Moves type name mangling after deadcode elimination. The motivation for doing this is to create a space between deadcode elimination and type name mangling where DWARF generation for types and variables can exist, to fix issue #23733. Change-Id: I9db8ecc0f4efe3df6c1e4025f02642fd452f9a39 Reviewed-on: https://go-review.googlesource.com/111236Reviewed-by:
-
Dave Brophy authored
This fixes the unwanted behaviour where printing a zero float with the #v fmt verb outputs "0" - e.g. missing the trailing decimal. This means that the output would be interpreted as an int rather than a float when parsed as Go source. After this change the the output is "0.0". Fixes #26363 Change-Id: Ic5c060522459cd5ce077675d47c848b22ddc34fa GitHub-Last-Rev: adfb061363f0566acec134c81be9a3dcb1f4cac8 GitHub-Pull-Request: golang/go#26383 Reviewed-on: https://go-review.googlesource.com/123956Reviewed-by:
Rob Pike <r@golang.org> Run-TryBot: Daniel Martí <mvdan@mvdan.cc> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Cherry Zhang authored
Duplicated anonymous interfaces caused nondeterministic build. The fix is CL 129515. This CL adds a test. Updates #27013. Change-Id: I6b7e1bbfc943c22e8e6f32c145f7aebb567cef15 Reviewed-on: https://go-review.googlesource.com/129680 Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Than McIntosh authored
This patch contains the remnants of CL (122482), which was intended to reduce memory allocation in 'relocsym'. Another CL (113637) went in first that included pretty much all of the code changes in 122482, however there are some changes to comments that are worth preserving. Change-Id: Iacdbd2bfe3b7ca2656596570f06ce9a646211913 Reviewed-on: https://go-review.googlesource.com/122482Reviewed-by:
-
Taesu Pyo authored
Fixes #26444 Fixes #27275 Change-Id: I9e8cbff79f7643ca8964c572c1a98172b6831730 GitHub-Last-Rev: 7eea2158b67ccab34b45a21e8f4289c36de02d93 GitHub-Pull-Request: golang/go#26719 Reviewed-on: https://go-review.googlesource.com/126897Reviewed-by:
-
Than McIntosh authored
Comment changes to fix typos, no code changes. Change-Id: I6c915f183025587fc479d14f5d2c885767348b1b Reviewed-on: https://go-review.googlesource.com/131615Reviewed-by:
-
Fazlul Shahriar authored
Fixes #27294 Change-Id: I8db5ca0f0c690bf532d3d33b8ed7d2633ad1702b Reviewed-on: https://go-review.googlesource.com/131855Reviewed-by:
-
Tobias Klauser authored
After CL 130736 there are no empty function declarations this package anymore, so empty.s is no longer needed. Change-Id: Ic4306f10ad8a31777a3337870ce19e14c1510f3b Reviewed-on: https://go-review.googlesource.com/131835 Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Yasuhiro Matsumoto authored
Add implementation of AF_UNIX. This works only on Windows 10. https://blogs.msdn.microsoft.com/commandline/2017/12/19/af_unix-comes-to-windows/ Fixes #26072 Change-Id: I76a96a472385a17901885271622fbe55d66bb720 Reviewed-on: https://go-review.googlesource.com/125456 Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Alex Brainman <alex.brainman@gmail.com>
-
Eric Ponce authored
Change-Id: Ibef5f96ea588d17eac1c96ee3992e01943ba0fef Reviewed-on: https://go-review.googlesource.com/131496 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
