In addition to possibly being clearer code,
this replaces an O(n) lookup with an O(log n) lookup.

Change-Id: I0a574c536a965a87f7ad6dcdcc30f737bc771cd5
Reviewed-on: https://go-review.googlesource.com/7623Reviewed-by: Rob Pike <r@golang.org>

Commit f1d669ae added support for
AES_256_GCM_SHA384 cipher suites as specified in RFC5289. However, it
did not take the arbitrary hash function into account in the TLS client
handshake when using client certificates.

The hashForClientCertificate method always returned SHA256 as its
hashing function, even if it actually used a different one to calculate
its digest. Setting up the connection would eventually fail with the
error "tls: failed to sign handshake with client certificate:
crypto/rsa: input must be hashed message".

Included is an additional test for this specific situation that uses the
SHA384 hash.

Fixes #9808

Change-Id: Iccbf4ab225633471ef897907c208ad31f92855a3
Reviewed-on: https://go-review.googlesource.com/7040Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>

Decrypter is an interface to support opaque private keys that perform
decryption operations. This interface is analogous to the crypto.Signer
interface.

This change introduces the crypto.Decrypter interface and implements
the crypto.Decrypter interface for rsa.PrivateKey with both OAEP and
PKCS#1 v1.5 padding modes.

Change-Id: I433f649f84ed3c2148337d735cafd75f1d94a904
Reviewed-on: https://go-review.googlesource.com/3900Reviewed-by: Adam Langley <agl@golang.org>

Change-Id: Ic22e004b43bd98e712befb30684be16d8214c94a
Reviewed-on: https://go-review.googlesource.com/7622Reviewed-by: Rob Pike <r@golang.org>

Change-Id: I105c1e7730c1e7ccf36297b9cbf96dc0a4868013
Reviewed-on: https://go-review.googlesource.com/7621Reviewed-by: Rob Pike <r@golang.org>

Change-Id: I91fe72c60d6c41644780474620e05380e9af2a3d
Reviewed-on: https://go-review.googlesource.com/7620Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>

This came up in private mail.
It works today and I want to make sure it stays working.

Change-Id: I13ebdc2dfadb3c72d7f179be89883137320c05d0
Reviewed-on: https://go-review.googlesource.com/7390Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Rob Pike <r@golang.org>

An explicit nil in an expression like nil.Foo caused a panic
because the evaluator attempted to reflect on the nil.
A typeless nil like this cannot be used to do anything, so
just error out.

Fixes #9426

Change-Id: Icd2c9c7533dda742748bf161eced163991a12f54
Reviewed-on: https://go-review.googlesource.com/7643Reviewed-by: David Symonds <dsymonds@golang.org>

While we're here, also fix two HTML issues.

Fixes #9235.

Change-Id: I6e2f50931c0f387881271484a726ac2308518cf4
Reviewed-on: https://go-review.googlesource.com/7602Reviewed-by: Rob Pike <r@golang.org>

Change-Id: Id5ce859bd4b6318dc9104f7377ae23d7f0bc30cd
Reviewed-on: https://go-review.googlesource.com/7640Reviewed-by: Minux Ma <minux@golang.org>

ARM64 doesn't have disassembler yet.

Change-Id: I016fa013b5ff50dc49d38ade42351b79be023d80
Reviewed-on: https://go-review.googlesource.com/7149Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: I6ca9caec8ccf12618e56dcf6b83328e7acf8b1ec
Reviewed-on: https://go-review.googlesource.com/7148Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: I5d40e04395de743a8fdcfa8bdc0e580729bc66a3
Reviewed-on: https://go-review.googlesource.com/7147Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Change-Id: I033eecff5e5838ba677378ac884bf5f29267e880
Reviewed-on: https://go-review.googlesource.com/7146Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: I11cd4b5e8daf3805af0eaa83b55b20da889702f4
Reviewed-on: https://go-review.googlesource.com/7145Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: Ief12e1435a40dd2eaddc3f97f63be44c4dd2e050
Reviewed-on: https://go-review.googlesource.com/7144Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: Ia817e78d9678a365a76fea5e4dbe8f8a5aab0bac
Reviewed-on: https://go-review.googlesource.com/7143Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: Ibda6a5bedaff57fd161d63fc04ad260931d34413
Reviewed-on: https://go-review.googlesource.com/7142Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: I92b4301b64054272d78dd15c16bf6ff592acad26
Reviewed-on: https://go-review.googlesource.com/7141Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Change-Id: Ia6c3d5e7a32b20e3c45d9485e66b48cd02644280
Reviewed-on: https://go-review.googlesource.com/7140Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Russ Cox <rsc@golang.org>

No peep optimizer yet.

Change-Id: Ifa5f993cd6ac5e34783c0df41faf772fbce96ae2
Reviewed-on: https://go-review.googlesource.com/7049Reviewed-by: Russ Cox <rsc@golang.org>

Only internal linking without cgo is supported for now.

Change-Id: I91eb1572c1ccc805db62fc4c29080df98797d51a
Reviewed-on: https://go-review.googlesource.com/7048Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Pre/post-index addressing modes with writeback use .W and .P
instruction suffixes, like on ARM.

Complex addressing modes are not supported yet.

Change-Id: I537a1c3fe5b057c0812662677d0010bc8c468ffb
Reviewed-on: https://go-review.googlesource.com/7047Reviewed-by: Rob Pike <r@golang.org>

ARM64 (ARMv8) has 32 general purpose, 64-bit integer registers
(R0-R31), 32 64-bit scalar floating point registers (F0-F31), and
32 128-bit vector registers (unused, V0-V31).

R31 is either the stack pointer (RSP), or the zero register (ZR),
depending on the instruction. Note the distinction between the
hardware stack pointer, RSP, and the virtual stack pointer SP.

The (hardware) stack pointer must be 16-byte aligned at all times;
the RSP register itself must be aligned, offset(RSP) only has to
have natural alignment.

Instructions are fixed-width, and are 32-bit wide. ARM64 supports
ARMv7 too (32-bit ARM), but not in the same process. In general,
there is not much in common between 32-bit ARM and ARM64, it's a
new architecture.

All implementations have floating point instructions.

This change adds a Prog.To3 field analogous to Prog.To. It is used
by exclusive load/store instructions such as STLXR which read from
one register, and write to both a register and a memory address.

	STLXRW	R1, (R0), R3

This will store the word contained in R1 to the memory address
pointed by R0. R3 will be updated with the status result of the
store. It is used to implement atomic operations.

No other changes are made to the portable Prog and Addr structures.

Change-Id: Ie839029aa5265bbad35769d9689eca11e1c48c47
Reviewed-on: https://go-review.googlesource.com/7046Reviewed-by: Russ Cox <rsc@golang.org>

ARM64 doesn't have the old assembler.

Change-Id: I9253271029440e2b7f2813d3e98a7d2e7a65bfbc
Reviewed-on: https://go-review.googlesource.com/7045Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Change-Id: I51db032e3dc2762d94e4000914b30813946250f7
Reviewed-on: https://go-review.googlesource.com/7044Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>

Change-Id: I56297aac4ee282fd117ec525b88dee4769477111
Reviewed-on: https://go-review.googlesource.com/7560Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>

Change-Id: I7bac7b659b7ff425c6f896c286d0f89f05eff6bd
Reviewed-on: https://go-review.googlesource.com/7601Reviewed-by: Minux Ma <minux@golang.org>

Change-Id: I45383de6d627be35f40e07a9008b6773f5c2b0d0
Reviewed-on: https://go-review.googlesource.com/7613Reviewed-by: Minux Ma <minux@golang.org>

OpenBSD/arm only currently supports softfloat, hence make the default GOARM=5.

Change-Id: Ie3e8f457f001b3803d17ad9bc4ab957b2da18c6a
Reviewed-on: https://go-review.googlesource.com/7614Reviewed-by: Minux Ma <minux@golang.org>

Change-Id: I9fe15781f52e0d16707a9c021cf800319721a606
Reviewed-on: https://go-review.googlesource.com/4913Reviewed-by: Minux Ma <minux@golang.org>

Change-Id: I2bc101aa19172e705ee4de5f3c73a8b4bbf4fa6f
Reviewed-on: https://go-review.googlesource.com/4912Reviewed-by: Minux Ma <minux@golang.org>

Change-Id: Ibb7e4f6b95b7a9782a47221cafbe4f20dd77fd38
Reviewed-on: https://go-review.googlesource.com/7583Reviewed-by: Minux Ma <minux@golang.org>

Fixes #10167.

Change-Id: Ib6c6b2b5dde47744b69f65482a21964fa3c12090
Reviewed-on: https://go-review.googlesource.com/7600Reviewed-by: Alex Brainman <alex.brainman@gmail.com>

DragonFlyBSD dropped support for i386 in 4.0 and there is no longer a
dragonfly/386 - as such, remove the Go port.

Fixes #8951
Fixes #7580
Fixes #7421

Change-Id: I69022ab2262132e8f97153f14dc8c37c98527008
Reviewed-on: https://go-review.googlesource.com/7543Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Joel Sing <jsing@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: I91f9b5280e08e005f5a891aaa249267c211d814b
Reviewed-on: https://go-review.googlesource.com/7592Reviewed-by: Minux Ma <minux@golang.org>

Fixes #10118.

Change-Id: I4a2e6748db609c6eed1d68c824b81c59bd7b875c
Reviewed-on: https://go-review.googlesource.com/7590Reviewed-by: Minux Ma <minux@golang.org>

Change-Id: Ieb13359c5bbe26bbf7baaaa8eb63d5e90bdefdd8
Reviewed-on: https://go-review.googlesource.com/7591Reviewed-by: Minux Ma <minux@golang.org>

Just little bits and pieces I noticed were unused in passing, and
some more found with https://github.com/opennota/check.

Change-Id: I199fecdbf8dc2ff9076cf4ea81395275c7f171c3
Reviewed-on: https://go-review.googlesource.com/7033Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Change-Id: I3096a7497955bc475739739ee23be387e9162867
Reviewed-on: https://go-review.googlesource.com/7210
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>