The existing code used ints for the (slow) decimal conversion and
assumed that they were 32bit wide.

This change uses uints and the appropriate width (32 or 64bit)
depending on platform.

The performance difference is in the noise for the usual (optimized)
case which does not use the slow path conversion:

benchmark                               old ns/op     new ns/op     delta
BenchmarkFormatFloatDecimal             298           299           +0.34%
BenchmarkFormatFloat                    388           392           +1.03%
BenchmarkFormatFloatExp                 365           364           -0.27%
BenchmarkFormatFloatNegExp              364           362           -0.55%
BenchmarkFormatFloatBig                 482           476           -1.24%
BenchmarkAppendFloatDecimal             100           102           +2.00%
BenchmarkAppendFloat                    199           201           +1.01%
BenchmarkAppendFloatExp                 174           175           +0.57%
BenchmarkAppendFloatNegExp              169           174           +2.96%
BenchmarkAppendFloatBig                 286           286           +0.00%
BenchmarkAppendFloat32Integer           99.9          102           +2.10%
BenchmarkAppendFloat32ExactFraction     161           164           +1.86%
BenchmarkAppendFloat32Point             199           201           +1.01%
BenchmarkAppendFloat32Exp               167           168           +0.60%
BenchmarkAppendFloat32NegExp            163           169           +3.68%
BenchmarkAppendFloat64Fixed1            137           134           -2.19%
BenchmarkAppendFloat64Fixed2            144           146           +1.39%
BenchmarkAppendFloat64Fixed3            138           140           +1.45%
BenchmarkAppendFloat64Fixed4            144           145           +0.69%

The performance difference is significant if the fast path conversion is
explicitly turned off (ftoa.go:101):

benchmark                               old ns/op     new ns/op     delta
BenchmarkFormatFloatDecimal             459           427           -6.97%
BenchmarkFormatFloat                    1560          1180          -24.36%
BenchmarkFormatFloatExp                 5501          3128          -43.14%
BenchmarkFormatFloatNegExp              24085         14360         -40.38%
BenchmarkFormatFloatBig                 1409          1081          -23.28%
BenchmarkAppendFloatDecimal             248           226           -8.87%
BenchmarkAppendFloat                    1315          982           -25.32%
BenchmarkAppendFloatExp                 5274          2869          -45.60%
BenchmarkAppendFloatNegExp              23905         14054         -41.21%
BenchmarkAppendFloatBig                 1194          860           -27.97%
BenchmarkAppendFloat32Integer           167           175           +4.79%
BenchmarkAppendFloat32ExactFraction     182           184           +1.10%
BenchmarkAppendFloat32Point             556           564           +1.44%
BenchmarkAppendFloat32Exp               1134          918           -19.05%
BenchmarkAppendFloat32NegExp            2679          1801          -32.77%
BenchmarkAppendFloat64Fixed1            274           238           -13.14%
BenchmarkAppendFloat64Fixed2            494           368           -25.51%
BenchmarkAppendFloat64Fixed3            1833          1008          -45.01%
BenchmarkAppendFloat64Fixed4            6133          3596          -41.37%

Change-Id: I829b8abcca882b1c10d8ae421d3249597c31f3c9
Reviewed-on: https://go-review.googlesource.com/3811Reviewed-by: Russ Cox <rsc@golang.org>

Fix tracing of syscall exit after:
https://go-review.googlesource.com/#/c/7504/

Change-Id: Idcde2aa826d2b9a05d0a90a80242b6bfa78846ab
Reviewed-on: https://go-review.googlesource.com/8728Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #10378

This is clumsy, but currently cover tool fails as:

$ go test -run=none -cover syscall
syscall_linux_amd64.go:15: can only use //go:noescape with external func implementations
FAIL	syscall [build failed]

This happens because cover tool mishandles //go: comments.
r and gri said that fixing cover is infeasible due to go/ast limitations.

So at least fix the offending code so that coverage works.
This come up in context of coverage-guided fuzzing which works best
with program-wide coverage.

Change-Id: I142e5774c9f326ed38cb202693bd4edae93879ba
Reviewed-on: https://go-review.googlesource.com/8723Reviewed-by: Rob Pike <r@golang.org>

The flag updates error annotations in test files from actual compiler output.
This is useful when doing compiler changes that add/remove/change lots of errors,
or when adding lots of new tests.
Also I noticed at least 2 cases where annotation were sub-optimal:
1. The annotation was "leaking param p" when the actual error is
"leaking param p to result ~r1".
2. The annotation was "leaking param m" when the actual errors
are "leaking param m" and "leaking param mv1".

For now it works only for errorcheck mode.

Also, apply the update to escape and liveness tests.
Some files have gccgo-specific errors of the form "gc error|gccgo error",
so it is risky to run update on all files. Gccgo-specific error
does not necessary contain '|', it can be just truncated.

Change-Id: Iaaae767f859dcb8321a8cb4970b2b70969e8a345
Reviewed-on: https://go-review.googlesource.com/5310
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Remove the "netaddr" type, which ambiguously represented either one
address, or a list of addresses. Instead, use "addrList" wherever
multiple addresses are supported.

The "first" method returns the first address matching some condition
(e.g. "is it IPv4?"), primarily to support legacy code that can't handle
multiple addresses.

The "partition" method splits an addrList into two categories, as
defined by some strategy function. This is useful for implementing
Happy Eyeballs, and similar two-channel algorithms.

Finally, internetAddrList (formerly resolveInternetAddr) no longer
mangles the ordering defined by getaddrinfo. In the future, this may
be used by a sequential Dial implementation.

Updates #8453, #8455.

Change-Id: I7375f4c34481580ab40e31d33002a4073a0474f3
Reviewed-on: https://go-review.googlesource.com/8360Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Update #9855

In preparation for introducing direct use of a zero register on
platforms that support it, take the opportunity to clean up
Componentgen a bit.

Change-Id: I120ce1ffcca8c4f7603bfe76bfa1aedd27ebb4d2
Reviewed-on: https://go-review.googlesource.com/8691
Run-TryBot: Dave Cheney <dave@cheney.net>
Reviewed-by: Minux Ma <minux@golang.org>

'themoduledata' doesn't really make sense now we support multiple moduledata
objects.

Change-Id: I8263045d8f62a42cb523502b37289b0fba054f62
Reviewed-on: https://go-review.googlesource.com/8521Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

If GOBIN is not empty the build moves the go executable
to a new path. When this test runs it fails to find the
go cmd in the GOROOT.

Change-Id: I100def0fbcb9691b13776f795b1d1725e36d8102
Reviewed-on: https://go-review.googlesource.com/8735Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This changes all the places that consult themoduledata to consult a
linked list of moduledata objects, as will be necessary for
-linkshared to work.

Obviously, as there is as yet no way of adding moduledata objects to
this list, all this change achieves right now is wasting a few
instructions here and there.

Change-Id: I397af7f60d0849b76aaccedf72238fe664867051
Reviewed-on: https://go-review.googlesource.com/8231Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Modelled somewhat on the -race support.

Change-Id: I137037addfc76341f7deb216776fdd18e9af9fe5
Reviewed-on: https://go-review.googlesource.com/8680Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: I49862e177045369d6c94d6a58afbdace4f13cc96
Reviewed-on: https://go-review.googlesource.com/8237Reviewed-by: Ian Lance Taylor <iant@golang.org>

Broken by CL 8541.

Change-Id: Ie2e89a22b91748e82f7bc4723660a24ed4135687
Reviewed-on: https://go-review.googlesource.com/8734Reviewed-by: Minux Ma <minux@golang.org>

Currently, the initial heap size reported in the gctrace line is the
heap_live right before sweep termination. However, we triggered GC
when heap_live reached next_gc, and there may have been significant
allocation between that point and the beginning of sweep
termination. Ideally these would be essentially the same, but
currently there's scheduler delay when readying the GC goroutine as
well as delay from background sweep finalization.

We should fix this delay, but in the mean time, to give the user a
better idea of how much the heap grew during the whole of garbage
collection, report the trigger rather than what the heap size happened
to be after the garbage collector finished rolling out of bed. This
will also be more useful for heap growth plots.

Change-Id: I08476b9fbcfb2de90592405e9c9f434dfb9eb1f8
Reviewed-on: https://go-review.googlesource.com/8512Reviewed-by: Rick Hudson <rlh@golang.org>

Change-Id: Ia0944e7b47193465d3ec37fc8dc46dea9b5dcc6b
Reviewed-on: https://go-review.googlesource.com/8710Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

According to Go execution modes, a Go program compiled with
-buildmode=c-archive has a main function, but it is ignored on run.
This gives the runtime the information it needs not to run the main.

I have this working with pending linker changes on darwin/amd64.

Change-Id: I49bd7d65aa619ec847c464a872afa5deea7d4d30
Reviewed-on: https://go-review.googlesource.com/8701Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Print("") was printing a header but no line.

Fixes #9665.

Change-Id: Iac783187786065e1389ad6e8d7ef02c579ed7bd8
Reviewed-on: https://go-review.googlesource.com/8665Reviewed-by: Ian Lance Taylor <iant@golang.org>

Also unify the tests where possible to make it easy to add more.

Fixes #10273.

Change-Id: Idfa4f4a5dcaa05974066bafe17bed6cdd2ebedb7
Reviewed-on: https://go-review.googlesource.com/8662Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Add arm64 assembly implementation of runtime.cmpstring and bytes.Compare.

benchmark                                old ns/op     new ns/op     delta
BenchmarkCompareBytesEqual               98.0          27.5          -71.94%
BenchmarkCompareBytesToNil               9.38          10.0          +6.61%
BenchmarkCompareBytesEmpty               13.3          10.0          -24.81%
BenchmarkCompareBytesIdentical           98.0          27.5          -71.94%
BenchmarkCompareBytesSameLength          43.3          16.3          -62.36%
BenchmarkCompareBytesDifferentLength     43.4          16.3          -62.44%
BenchmarkCompareBytesBigUnaligned        6979680       1360979       -80.50%
BenchmarkCompareBytesBig                 6915995       1381979       -80.02%
BenchmarkCompareBytesBigIdentical        6781440       1327304       -80.43%

benchmark                             old MB/s     new MB/s     speedup
BenchmarkCompareBytesBigUnaligned     150.23       770.46       5.13x
BenchmarkCompareBytesBig              151.62       758.76       5.00x
BenchmarkCompareBytesBigIdentical     154.63       790.01       5.11x

* note, the machine we are benchmarking on has some issues. What is clear is
compared to a few days ago the old MB/s value has increased from ~115 to 150.
I'm less certain about the new MB/s number, which used to be close to 1Gb/s.

Change-Id: I4f31b2c7a06296e13912aacc958525632cb0450d
Reviewed-on: https://go-review.googlesource.com/8541Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
Reviewed-by: David Crawshaw <crawshaw@golang.org>

Change-Id: I98b172181c2fd85aa385341e28bc661dbc274252
Reviewed-on: https://go-review.googlesource.com/2167
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

There was a logical race in Transport.RoundTrip where a roundtrip with
a pending response would race with the channel for the connection
closing. This usually happened for responses with connection: close
and no body.

We handled this race by reading the close channel, setting a timer
for 100ms and if no response was returned before then, we would then
return an error.

This put a lower bound on how fast a connection could fail. We couldn't
fail a request faster than 100ms.

Reordering the channel operations gets rid of the logical race. If
the readLoop causes the connection to be closed, it would have put
its response into the return channel already and we can fetch it with
a non-blocking receive.

Change-Id: Idf09e48d7a0453d7de0120d3055d0ce5893a5428
Reviewed-on: https://go-review.googlesource.com/1787Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

      The API call will fail when Bitbucket repositories are private. In
that case, probe for the repository using vcsCmd.ping.

      Fixes #5375

Change-Id: Ia604ecf9014805579dfda4b5c8e627a52783d56e
Reviewed-on: https://go-review.googlesource.com/1910Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #10353

See test/escape2.go:issue10353. Previously new(int) did not escape to heap,
and so heap-allcated closure was referencing a stack var. This breaks
the invariant that heap must not contain pointers to stack.

Look at the following program:

package main

func main() {
	foo(new(int))
	bar(new(int))
}

func foo(x *int) func() {
	return func() {
		println(*x)
	}
}

// Models what foo effectively does.
func bar(x *int) *C {
	return &C{x}
}

type C struct {
	x *int
}

Without this patch escape analysis works as follows:

$ go build -gcflags="-m -m -m -l" esc.go
escflood:1: dst ~r1 scope:foo[0]
escwalk: level:0 depth:0  func literal( l(9) f(1) esc(no) ld(1)) scope:foo[1]
/tmp/live2.go:9: func literal escapes to heap
escwalk: level:0 depth:1 	 x( l(8) class(PPARAM) f(1) esc(no) ld(1)) scope:foo[1]
/tmp/live2.go:8: leaking param: x to result ~r1

escflood:2: dst ~r1 scope:bar[0]
escwalk: level:0 depth:0  &C literal( l(15) esc(no) ld(1)) scope:bar[1]
/tmp/live2.go:15: &C literal escapes to heap
escwalk: level:-1 depth:1 	 &C literal( l(15)) scope:bar[0]
escwalk: level:-1 depth:2 		 x( l(14) class(PPARAM) f(1) esc(no) ld(1)) scope:bar[1]
/tmp/live2.go:14: leaking param: x

/tmp/live2.go:5: new(int) escapes to heap
/tmp/live2.go:4: main new(int) does not escape

new(int) does not escape while being captured by the closure.
With this patch escape analysis of foo and bar works similarly:

$ go build -gcflags="-m -m -m -l" esc.go
escflood:1: dst ~r1 scope:foo[0]
escwalk: level:0 depth:0  &(func literal)( l(9)) scope:foo[0]
escwalk: level:-1 depth:1 	 func literal( l(9) f(1) esc(no) ld(1)) scope:foo[1]
/tmp/live2.go:9: func literal escapes to heap
escwalk: level:-1 depth:2 		 x( l(8) class(PPARAM) f(1) esc(no) ld(1)) scope:foo[1]
/tmp/live2.go:8: leaking param: x

escflood:2: dst ~r1 scope:bar[0]
escwalk: level:0 depth:0  &C literal( l(15) esc(no) ld(1)) scope:bar[1]
/tmp/live2.go:15: &C literal escapes to heap
escwalk: level:-1 depth:1 	 &C literal( l(15)) scope:bar[0]
escwalk: level:-1 depth:2 		 x( l(14) class(PPARAM) f(1) esc(no) ld(1)) scope:bar[1]
/tmp/live2.go:14: leaking param: x

/tmp/live2.go:4: new(int) escapes to heap
/tmp/live2.go:5: new(int) escapes to heap

Change-Id: Ifd14b7ae3fc11820e3b5eb31eb07f35a22ed0932
Reviewed-on: https://go-review.googlesource.com/8408Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Mainly it is simple copy. But I had to change amd64
lastcontinuehandler return value from uint32 to int32.
I don't remember how it happened to be uint32, but new
int32 is matching better with Windows documentation (LONG).
I don't think it matters one way or the others.

Change-Id: I6935224a2470ad6301e27590f2baa86c13bbe8d5
Reviewed-on: https://go-review.googlesource.com/8686Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This update makes maxBacktrackLen return 0 if
len(prog.Inst) > maxBacktrackProg. This prevents an attempt to
backtrack against a nil bitstate.

Fixes #10319

Change-Id: Icdbeb2392782ccf66f9d0a70ea57af22fb93f01b
Reviewed-on: https://go-review.googlesource.com/8473Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

When making a request to an IPv6 address with a zone identifier, for
exmaple [fe80::1%en0], RFC 6874 says HTTP clients must remove the zone
identifier "%en0" before writing the request for security reason.

This change removes any IPv6 zone identifer attached to URI in the Host
header field in requests.

Fixes #9544.

Change-Id: I7406bd0aa961d260d96f1f887c2e45854e921452
Reviewed-on: https://go-review.googlesource.com/3111Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Rename now uses MoveFileEx which was previously not available to
use because it is not supported on Windows 2000.

Change-Id: I583d029c4467c9be6d1574a790c423559b441e87
Reviewed-on: https://go-review.googlesource.com/6140Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>

Add support for arm64 four operand conditional instructions.

Superceedes CL 8405.

Change-Id: I12da8f4822938feec400bbcc426eeaf884536135
Reviewed-on: https://go-review.googlesource.com/8638Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>

Change-Id: If3c8c9035e12d41647ae4982883f6a979313ea9d
Reviewed-on: https://go-review.googlesource.com/8682Reviewed-by: Minux Ma <minux@golang.org>

Fixes #10389

Change-Id: Id1c687122751f9317041d9e425d03b267a26c6de
Reviewed-on: https://go-review.googlesource.com/8681Reviewed-by: Rob Pike <r@golang.org>

In cl/8652 I broke darwin/arm and darwin/386 because I removed the *g
parameter, which they both expect and use. This CL adjusts both ports
to look for g0 in m, just as darwin/amd64 does.

Tested on darwin{386,arm,amd64}.

Change-Id: Ia56f3d97e126b40d8bbd2e8f677b008e4a1badad
Reviewed-on: https://go-review.googlesource.com/8666Reviewed-by: Ian Lance Taylor <iant@golang.org>

Also move dumpregs into defs_windows_*.go.

Change-Id: Ic077d7dbb133c7b812856e758d696d6fed557afd
Reviewed-on: https://go-review.googlesource.com/4650Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Change-Id: Id4997d611ced29397133f14def6abc88aa9e811e
Reviewed-on: https://go-review.googlesource.com/8252
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Found with https://github.com/opennota/check.

Change-Id: I50c173382782fb16b15100e02c1c85610bc233a0
Reviewed-on: https://go-review.googlesource.com/7130Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>

Change-Id: I6c3a62403941d357ffd9d0025289c2180139b0bd
Reviewed-on: https://go-review.googlesource.com/8664Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>

This is a practice run for darwin/arm.

Similar to the linux/amd64 shared library entry point. With several
pending linker changes I am successfully using this to implement
-buildmode=c-archive on darwin/amd64 with external linking.

The same entry point can be reused to implement -buildmode=c-shared
on darwin/amd64, however that will require further ld changes to
remove all text relocations.

One extra runtime change will follow this. According to the Go
execution modes document, -buildmode=c-archive should ignore the Go
main function. Right now it is being executed (and the process exits
if it doesn't block). I'm still searching for the right way to do
this.

Change-Id: Id97901ddd4d46970996f222bd79731dabff66a3d
Reviewed-on: https://go-review.googlesource.com/8652Reviewed-by: Ian Lance Taylor <iant@golang.org>

The linker currently (on some platforms) takes a -shared flag, which means
approximately what -buildmode=c-shared means in the in the proposed "Go
Execution Modes" document. As part of implementing other modes, the term
"shared" becomes horribly overloaded, so this replaces -shared with a
-buildmode argument instead (which currently only handles -buildmode=c-shared
and the default -buildmode=exe -- no new behaviour here).

As the linker support for -shared was in 1.4 this retains it as an alias.

Change-Id: Id2ebb8e05ee07f46208a554bc2622d0e67b47082
Reviewed-on: https://go-review.googlesource.com/8304Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Change-Id: Ie75a01e899e68f4f9643410f5e161152a81b8ba0
Reviewed-on: https://go-review.googlesource.com/8655Reviewed-by: Ian Lance Taylor <iant@golang.org>

When decoding an invalid typeId the associated *decEngine was not
removed from decoderMap. If the decoder was run again on the same input
a nil *decEngine was found in the map and assumed to be initialized,
resulting in a panic.

Fixes #9649

Change-Id: I5bb51808362a21c09228c2705a658f073e5b59b3
Reviewed-on: https://go-review.googlesource.com/3509Reviewed-by: Rob Pike <r@golang.org>

There was no way to get to the error message before.

Change-Id: I4aa9d3d9f468c33f9996295bafcbed097de0389f
Reviewed-on: https://go-review.googlesource.com/8660Reviewed-by: Alan Donovan <adonovan@google.com>

Fixes #10379.

Change-Id: Ia4cdda36ed57a06371f9ace7365ce9e215228487
Reviewed-on: https://go-review.googlesource.com/8654Reviewed-by: Rob Pike <r@golang.org>